Porterbuilt crossmember trick - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigsnookmaster · 08-20-2011, 12:42 PM

I installed a Porterbuilt crossmember and tubular trailing arms on my truck 4 or 5 months ago, and thought I would share a little trick I came up with. Installing these arms with the spacers can be a little tough, because everything is really tight, and when you add paint or powdercoating, it gets tighter. I made a spreader out of a short piece of 1/2-13 threaded rod with 2 washers and nuts. I put them in one of the holes you are not using, and spread the brackets out a bit to make the install easy, drop your bolts through, then remove the spreader. Piece of cake, and no messed up powdercoating from spreading it out.

big_al_71 · 08-20-2011, 01:32 PM

Great ingenuity...thanks for sharing..Greg

*mrhino* · 08-20-2011, 03:24 PM

could have used that, i fought like hell to get mine in.

bigsnookmaster · 08-20-2011, 06:19 PM

Quote:

Originally Posted by mrhino

could have used that, i fought like hell to get mine in.

I know, things like this usually come after you need them. I think Nate at Porterbuilt should throw a set in when you buy them! Just a thought.

08-20-2011, 12:42 PM	#1
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Porterbuilt crossmember trick I installed a Porterbuilt crossmember and tubular trailing arms on my truck 4 or 5 months ago, and thought I would share a little trick I came up with. Installing these arms with the spacers can be a little tough, because everything is really tight, and when you add paint or powdercoating, it gets tighter. I made a spreader out of a short piece of 1/2-13 threaded rod with 2 washers and nuts. I put them in one of the holes you are not using, and spread the brackets out a bit to make the install easy, drop your bolts through, then remove the spreader. Piece of cake, and no messed up powdercoating from spreading it out. Attached Images __________________ greg http://community.webshots.com/user/68406Stepside

08-20-2011, 01:32 PM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Porterbuilt crossmember trick Great ingenuity...thanks for sharing..Greg __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-20-2011, 03:24 PM	#3
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: Porterbuilt crossmember trick could have used that, i fought like hell to get mine in.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.