WA WTB - Single Wall Top Plug and Wiring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 Blazer CST · 09-01-2011, 02:56 PM

I am looking for the cab harness that has the plug that hooks into the single wall top from the fuse box. Thanks

**leddzepp** · 09-01-2011, 03:13 PM

I was going to move your post from the truck parts board to this board, but since you posted another one here, I deleted your original one. Good luck!

4oldcars · 09-02-2011, 11:04 AM

I need one too. Is this available aftermarket?

72 Blazer CST · 09-02-2011, 01:50 PM

I have never seen it aftermarket. I am sure it is not.

red71cheyenne · 09-04-2011, 10:39 PM

You might be able to get something from M&H. http://www.wiringharness.com/

There is a trailer connector harness that might work, but it has a couple of extra wires.

72 Blazer CST · 09-06-2011, 10:52 AM

Thanks, I didn't see anything on their website. I sent them an email. I'm still looking for one if anybody can help.

ETsC10 · 09-08-2011, 08:23 PM

I've got several OEM pigtails (from fuse block to top harness)
and one complete assy (all wires + plate). Need $20 on the
pigtails and $50 on the complete set-up. Free priority shipping.

Let me know your wishes guys...I'll post some pics later tonight
Thanks, ET

72 Blazer CST · 09-08-2011, 08:27 PM

Thats great news! Thanks for responding. I would like to get first inline for the nicest pigtail you have for sure. I may be interested in the complete assembly if the plate is in better condition than mine. I will wait to see your photos. Thanks again.

ETsC10 · 09-08-2011, 09:00 PM

OK. I've got two of the pigtails here at the shop and they both pretty
much look the same. I think I have more but will have to dig for them.

The assy's lettering has had better days but shows no hint of damage.

72 Blazer CST · 09-08-2011, 10:06 PM

Your plate is in about the same condition mine is in. I will let you check your other pigtails and take the nicest one you have. Thanks again.
Posted via Mobile Device

ETsC10 · 09-08-2011, 10:37 PM

72 Blazer CST, you are in. PM me please or let this thread
run it's course. At any rate, you win the best I've got.

All of my pigtails were in about the same basic condition.

The insulation near the red plug was coated in black gunk,
which I removed, and all are the faded red you see. The origional
red might be able to be restored with further cleaning and vinyl paint.

I have not delved into the plugs terminals, so a good cleaning with
contact cleaner might be in order. The wires are not lumpy or overly
stiff so I think, if handled gently during install, they should be fine.

72 Blazer CST · 09-08-2011, 10:59 PM

I will take two of these instead of one. I will send you a pm tomorrow. Thanks - Tim
Posted via Mobile Device

ETsC10 · 09-09-2011, 03:03 AM

Quote:

Originally Posted by 72 Blazer CST

I will take two of these instead of one. I will send you a pm tomorrow. Thanks - Tim
Posted via Mobile Device

Will do Tim. I'll clean and pack and I'll chat with you tomorrow. Ellen

ETsC10 · 09-09-2011, 04:35 PM

Found another assy...nicer and even more complete. SOLD

4oldcars · 09-12-2011, 09:50 AM

I only need the plug as in the 4th pic but I'll take whatever to get it. Pm payment info. Paypal?

ETsC10 · 09-12-2011, 12:58 PM

Quote:

Originally Posted by 4oldcars

I only need the plug as in the 4th pic but I'll take whatever to get it. Pm payment info. Paypal?

Paypals fine. I have one extra pigtail and it's yours.
$20 includes priority mailing.

My PP is:
ETzC10@yahoo.com

Thank you! Ellen

4oldcars · 09-12-2011, 05:18 PM

Payment sent. Thanx! Will PM address.

ETsC10 · 09-12-2011, 09:23 PM

Quote:

Originally Posted by 4oldcars

Payment sent. Thanx! Will PM address.

PM and $ recieved and going out in the morning. Thank You!!

ETsC10 · 09-12-2011, 09:35 PM

72 Blazer CST has tentative dibs on the other two single harnesses or the assembly
that included the fixtures...however we are waiting because I may have a restoration
kit (or, at least the lettering) in the works. I won't know until later this week.

As an aide to this endeavor; has anyone ever seen one of these junction backing
plates in NOS condition? All of the plates I have have a yellowish almond background.
I need to know if they started as almond or white or whatever in between.

Thanks for any help.

.

2003 silverado · 09-13-2011, 08:48 PM

Interested in the pic on 9/9 at 435pm $60 shipped what does that come with? Iam going to say Ill take them pending question Thanks Dave

ETsC10 · 09-14-2011, 10:14 PM

Quote:

Originally Posted by 2003 silverado

Interested in the pic on 9/9 at 435pm $60 shipped what does that come with? Iam going to say Ill take them pending question Thanks Dave

Dave, thanks for your interest but that assembly is on hold for now.
72 Blazer CST has first dibs on it. Please review the post just prior to yours.

ET

ETsC10 · 09-14-2011, 10:20 PM

Quote:

Originally Posted by ETsC10

... we are waiting because I may have a restoration
kit (or, at least the lettering) in the works. I won't know until later this week.
As an aide to this endeavor; has anyone ever seen one of these junction backing
plates in NOS condition? All of the plates I have have a yellowish almond background.
I need to know if they started as almond or white or whatever in between..

Update: I saw a proof of a sticker for restoring the face on the junction plates today.
It was a bit off so I sent revisions and we shall see what happens from here.
Thanks for your patience!

stilesjimmy · 09-16-2011, 09:24 PM

If you come across another plug i would like to get it. Thanks, Jon

**southern parts** · 09-17-2011, 06:19 AM

you can make a harness to plug into the top. all you need to do is splice the male end of a turn signal connection to dome light harness and it will plug right in.

4oldcars · 09-17-2011, 10:27 AM

Received mine from ETsC10. Very nice. Thanx!

09-01-2011, 02:56 PM	#1
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	WTB - Single Wall Top Plug and Wiring I am looking for the cab harness that has the plug that hooks into the single wall top from the fuse box. Thanks

09-01-2011, 03:13 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: WTB - Single Wall Top Plug and Wiring I was going to move your post from the truck parts board to this board, but since you posted another one here, I deleted your original one. Good luck! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

09-02-2011, 11:04 AM	#3
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB - Single Wall Top Plug and Wiring I need one too. Is this available aftermarket? __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

09-02-2011, 01:50 PM	#4
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: WTB - Single Wall Top Plug and Wiring I have never seen it aftermarket. I am sure it is not.

09-04-2011, 10:39 PM	#5
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: WTB - Single Wall Top Plug and Wiring You might be able to get something from M&H. http://www.wiringharness.com/ There is a trailer connector harness that might work, but it has a couple of extra wires. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

09-06-2011, 10:52 AM	#6
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: WTB - Single Wall Top Plug and Wiring Thanks, I didn't see anything on their website. I sent them an email. I'm still looking for one if anybody can help.

09-08-2011, 08:23 PM	#7
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: WTB - Single Wall Top Plug and Wiring I've got several OEM pigtails (from fuse block to top harness) and one complete assy (all wires + plate). Need $20 on the pigtails and $50 on the complete set-up. Free priority shipping. Let me know your wishes guys...I'll post some pics later tonight Thanks, ET

09-08-2011, 08:27 PM	#8
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: WTB - Single Wall Top Plug and Wiring Thats great news! Thanks for responding. I would like to get first inline for the nicest pigtail you have for sure. I may be interested in the complete assembly if the plate is in better condition than mine. I will wait to see your photos. Thanks again.

09-08-2011, 09:00 PM	#9
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: WTB - Single Wall Top Plug and Wiring OK. I've got two of the pigtails here at the shop and they both pretty much look the same. I think I have more but will have to dig for them. The assy's lettering has had better days but shows no hint of damage. Attached Images

09-08-2011, 10:06 PM	#10
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: WTB - Single Wall Top Plug and Wiring Your plate is in about the same condition mine is in. I will let you check your other pigtails and take the nicest one you have. Thanks again. Posted via Mobile Device

09-08-2011, 10:37 PM	#11
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: WTB - Single Wall Top Plug and Wiring 72 Blazer CST, you are in. PM me please or let this thread run it's course. At any rate, you win the best I've got. All of my pigtails were in about the same basic condition. The insulation near the red plug was coated in black gunk, which I removed, and all are the faded red you see. The origional red might be able to be restored with further cleaning and vinyl paint. I have not delved into the plugs terminals, so a good cleaning with contact cleaner might be in order. The wires are not lumpy or overly stiff so I think, if handled gently during install, they should be fine.

09-08-2011, 10:59 PM	#12
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: WTB - Single Wall Top Plug and Wiring I will take two of these instead of one. I will send you a pm tomorrow. Thanks - Tim Posted via Mobile Device

09-09-2011, 04:35 PM	#14
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: WTB - Single Wall Top Plug and Wiring Found another assy...nicer and even more complete. SOLD Attached Images Last edited by ETsC10; 10-05-2011 at 08:22 PM.

09-12-2011, 09:50 AM	#15
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB - Single Wall Top Plug and Wiring I only need the plug as in the 4th pic but I'll take whatever to get it. Pm payment info. Paypal? __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

09-12-2011, 05:18 PM	#17
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB - Single Wall Top Plug and Wiring Payment sent. Thanx! Will PM address. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed



Register or Log In To remove these advertisements.

09-12-2011, 09:35 PM	#19
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: WTB - Single Wall Top Plug and Wiring 72 Blazer CST has tentative dibs on the other two single harnesses or the assembly that included the fixtures...however we are waiting because I may have a restoration kit (or, at least the lettering) in the works. I won't know until later this week. As an aide to this endeavor; has anyone ever seen one of these junction backing plates in NOS condition? All of the plates I have have a yellowish almond background. I need to know if they started as almond or white or whatever in between. Thanks for any help. .

09-13-2011, 08:48 PM	#20
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	Re: WTB - Single Wall Top Plug and Wiring Interested in the pic on 9/9 at 435pm $60 shipped what does that come with? Iam going to say Ill take them pending question Thanks Dave __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student)

09-16-2011, 09:24 PM	#23
stilesjimmy Registered User Join Date: Sep 2010 Location: la quinta Posts: 14	Re: WTB - Single Wall Top Plug and Wiring If you come across another plug i would like to get it. Thanks, Jon

09-17-2011, 06:19 AM	#24
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: WTB - Single Wall Top Plug and Wiring you can make a harness to plug into the top. all you need to do is splice the male end of a turn signal connection to dome light harness and it will plug right in.

09-17-2011, 10:27 AM	#25
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB - Single Wall Top Plug and Wiring Received mine from ETsC10. Very nice. Thanx! __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.