axle leaf spring perches....LOL HELP!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

loweredd · 08-11-2003, 11:40 PM

LOL, I hope you know what I mean......the perch that is welded on the axle that mounts on the leaf springs. I need to know where to find new ones if anyone knows where.

P.S.....it's for my 84.

SCOTI · 08-12-2003, 10:43 AM

www.detroitspeed.com has a bolt in style leaf spring pad that you can move exactly where you need it, set the pinion angle, then weld it into place. Try the link & look @ rear suspension parts (their stuff is mainly for cars but as long as your axle tubing dia is 3" they will work).

phantom dually · 08-15-2003, 11:30 PM

Summit sells these. I bought a set at a local 4 wheel supply house, For some reason they say there for a DODGE!!!

crazy longhorn · 08-15-2003, 11:42 PM

http://store.summitracing.com/partde...rt=MOR%2D85090 The mopar brackets are a little cheaper than the Moroso http://store.summitracing.com/partde...=DCC%2D4120074 these are the ones i used on the 12 bolt swap into my longhorn.......crazyL

loweredd · 08-16-2003, 04:29 AM

dang, thanks guys. I tried posting earlier that I never got an email when Scoti posted, but my internet was being a pain. I actually found some from rockequipment.com....some 4x4 place in CA.
Those you linked to are actually cheaper longhorn.......I never thought to check my parts sales competition. LOL.

08-11-2003, 11:40 PM	#1
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	axle leaf spring perches....LOL HELP!! LOL, I hope you know what I mean......the perch that is welded on the axle that mounts on the leaf springs. I need to know where to find new ones if anyone knows where. P.S.....it's for my 84.

08-12-2003, 10:43 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,132	www.detroitspeed.com has a bolt in style leaf spring pad that you can move exactly where you need it, set the pinion angle, then weld it into place. Try the link & look @ rear suspension parts (their stuff is mainly for cars but as long as your axle tubing dia is 3" they will work). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-15-2003, 11:30 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Summit sells these. I bought a set at a local 4 wheel supply house, For some reason they say there for a DODGE!!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-15-2003, 11:42 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	http://store.summitracing.com/partde...rt=MOR%2D85090 The mopar brackets are a little cheaper than the Moroso http://store.summitracing.com/partde...=DCC%2D4120074 these are the ones i used on the 12 bolt swap into my longhorn.......crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... Last edited by crazy longhorn; 08-15-2003 at 11:51 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-16-2003, 04:29 AM	#5
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	dang, thanks guys. I tried posting earlier that I never got an email when Scoti posted, but my internet was being a pain. I actually found some from rockequipment.com....some 4x4 place in CA. Those you linked to are actually cheaper longhorn.......I never thought to check my parts sales competition. LOL.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.