IN 1970 Original Rust Free body Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 10-14-2011, 06:37 PM

Sorry...1970 As you can see from the pics these panels are all ready to go.. .Just hit with 1500-2000 grit when they arrive and get em' wet!!!! besides cowl panels work in progress. People might think this is high but I KNOW MY PARTS.. there is not even discoloration inside these things...

Fenders-125 Pass Fender SOLD to jessewebb
Doors-200SOLD TO buidina68
Hey...I am trying to find market... I am not greedy but I am pretty knowledgeable...ALL the hard work is done.. .Just need prep and paint...Will negotiate for complete doors with all hardware or whatever you need to supplement your build/resto.

HeavyMetalChevy · 10-14-2011, 06:41 PM

doors

HeavyMetalChevy · 10-14-2011, 09:22 PM

You guys might think this is steep...but these doors do not even have dust or ANY rust stain,dust,or dirt on inside... LOOK

HeavyMetalChevy · 10-14-2011, 09:26 PM

more inside internal door pics

**WETOWM** · 10-14-2011, 10:07 PM

What about the fenders where they rust free before any body work ? If not what was repaired ?? Thanks rich

HeavyMetalChevy · 10-14-2011, 10:21 PM

Quote:

Originally Posted by WETOWM

What about the fenders where they rust free before any body work ? If not what was repaired ?? Thanks rich

As far as I know yes... I bought it like this and the guy I got it from is a friend.. .It also has an arizona bed.. .I can pull them off if need be though... As far as body work I can assure NO PATCHES OR BONDO... SOLID SOLID SOLID

**72k5zl1** · 10-15-2011, 07:04 AM

will you ship the pass fender? thanks 05201

BuildinA68 · 10-15-2011, 07:54 AM

check shipping on both the doors complete to a business in 24523. or if you check greyhound (lynchburg / roanoke va)? not sure where there is a terminal at. and with a hope and prayer they dont get too banged up.

**70STOVEBOLT** · 10-15-2011, 10:30 AM

Duane, is the bed a long or short?

Thanks,
Mark

HeavyMetalChevy · 10-15-2011, 11:25 AM

Quote:

Originally Posted by BuildinA68

check shipping on both the doors complete to a business in 24523. or if you check greyhound (lynchburg / roanoke va)? not sure where there is a terminal at. and with a hope and prayer they dont get too banged up.

Ryan...you get the hinges and lights??? And yeah I will check ship...I got one going out via Greyhound this weekend It should be ok... I am using 3/4" carrpet padding to wrap all body parts... That should do the trick... I am meticulous about stuff... I will let you know

HeavyMetalChevy · 10-15-2011, 11:28 AM

Quote:

Originally Posted by 70STOVEBOLT

Duane, is the bed a long or short?

Thanks,
Mark

Mark it is a long bed but not sure if I am going to part with this one...Its from AZ and like I mentioned all these parts are from my truck!! lol what am I doing???? lol And just to warn you...The price for a bed like the one I have will be reasonable but.....yeah... It has already been sealed on the bottom with all new hardware.. .I will get pics though... I got a complete 71 truck coming tomorrow with just as good parts but it has wood long bed setup..

HeavyMetalChevy · 10-15-2011, 11:30 AM

Quote:

Originally Posted by 72k5zl1

will you ship the pass fender? thanks 05201

yes I will ship... Everyone give me some time today and bare with me.. .I have that funeral service today in Indy for one of my longest closest friends... He was only 27.This site and parts have been a blessing though keeping my mind occupied and busy....I will have all prices by Sunday but will be back to computer around 8 pm tonight... thanks everyone...God Bless

**DANTIP** · 10-15-2011, 01:08 PM

I'll take the DS fender and door.

Dan

BuildinA68 · 10-15-2011, 03:12 PM

got the hinges and light housings!! just let me know about the doors, very serious!! thanks!!

*SILVER_WS6* · 10-16-2011, 12:16 AM

Ever come to kokomo? I need a pass fender for my 72 Blazer/...

HeavyMetalChevy · 10-16-2011, 12:28 AM

Quote:

Originally Posted by SILVER_WS6

Ever come to kokomo? I need a pass fender for my 72 Blazer/...

Guys rough night/day... this is it FIRST PAY FIRST serve not trying to have you do my work but I am so out of it from what just went down at funeral that I do not even know how I can be coherent at all. And no...I did not "self medicate" This is rough... Sorry for venting... I am still reachable but just plese help me help you...

HeavyMetalChevy · 10-16-2011, 12:53 AM

Quote:

Originally Posted by BuildinA68

got the hinges and light housings!! just let me know about the doors, very serious!! thanks!!

Yeah ...the only reason I painted the interiors of the housings chrome is because it makes the reflection of the bulbs way better and responsive.. .personal preference... I should have told you before hand but you can def. see it was not to cover anything up.... You see how clean the sockets were??? And I forgot to send the seal for the taillights so I will ship them out shortly..

*SILVER_WS6* · 10-16-2011, 02:16 AM

No worries. Welcome home.> Get some rest.. Im ready to paypal anytime just cant come get it as im in Afghan for the time..

HeavyMetalChevy · 10-16-2011, 02:47 AM

Quote:

Originally Posted by SILVER_WS6

No worries. Welcome home.> Get some rest.. Im ready to paypal anytime just cant come get it as im in Afghan for the time..

Hells yeah soldier!!!! You want shipped... I ma dedicated to stay home on lock down...aka house arrest...lol You want to just pay for fender or you need it shipped...I can have it taken to Indy any week... and you could arrange to pic up there...Let me know

hatred · 10-16-2011, 07:48 PM

I'll take both door. PM me some payment info Bro.

speedfreak369 · 10-16-2011, 08:16 PM

if falls throough....ill take both doors... zip.30157 pm me if it comes to me

HeavyMetalChevy · 10-16-2011, 10:09 PM

Quote:

Originally Posted by BuildinA68

check shipping on both the doors complete to a business in 24523. or if you check greyhound (lynchburg / roanoke va)? not sure where there is a terminal at. and with a hope and prayer they dont get too banged up.

Primed/Hugger Orange Doors sold to BUILDINGA68... THANKS!!! Have another pair pics posted soon.

HeavyMetalChevy · 10-17-2011, 12:03 PM

Primered/hugger orange doors sold to BUILDINGA68... Great guy...Have a safe trip home!!!!
Still have fenders... got solid pass. side door $100.

HeavyMetalChevy · 10-17-2011, 12:38 PM

few more

jessewebb · 10-17-2011, 02:06 PM

Dude I need a passenger side fender and a good tailgate without the trim holes on the fender or the tailgate. Lol
Posted via Mobile Device

10-14-2011, 06:37 PM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	1970 Original Rust Free body Parts Sorry...1970 As you can see from the pics these panels are all ready to go.. .Just hit with 1500-2000 grit when they arrive and get em' wet!!!! besides cowl panels work in progress. People might think this is high but I KNOW MY PARTS.. there is not even discoloration inside these things... Fenders-125 Pass Fender SOLD to jessewebb Doors-200SOLD TO buidina68 Hey...I am trying to find market... I am not greedy but I am pretty knowledgeable...ALL the hard work is done.. .Just need prep and paint...Will negotiate for complete doors with all hardware or whatever you need to supplement your build/resto. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 10-22-2011 at 04:28 PM.

10-14-2011, 06:41 PM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1970 Original Rust Free body Parts doors Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-14-2011, 09:22 PM	#3
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1970 Original Rust Free body Parts You guys might think this is steep...but these doors do not even have dust or ANY rust stain,dust,or dirt on inside... LOOK Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-14-2011, 09:26 PM	#4
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1970 Original Rust Free body Parts more inside internal door pics Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-14-2011, 10:07 PM	#5
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,114	Re: 1970 Original Rust Free body Parts What about the fenders where they rust free before any body work ? If not what was repaired ?? Thanks rich

10-15-2011, 07:04 AM	#7
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,624	Re: 1970 Original Rust Free body Parts will you ship the pass fender? thanks 05201 __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

10-15-2011, 07:54 AM	#8
BuildinA68 Registered User Join Date: Mar 2011 Location: Goode, VA Posts: 159	Re: 1970 Original Rust Free body Parts check shipping on both the doors complete to a business in 24523. or if you check greyhound (lynchburg / roanoke va)? not sure where there is a terminal at. and with a hope and prayer they dont get too banged up. __________________ Ryan

10-15-2011, 10:30 AM	#9
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 1970 Original Rust Free body Parts Duane, is the bed a long or short? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-15-2011, 01:08 PM	#13
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,889	Re: 1970 Original Rust Free body Parts I'll take the DS fender and door. Dan

10-15-2011, 03:12 PM	#14
BuildinA68 Registered User Join Date: Mar 2011 Location: Goode, VA Posts: 159	Re: 1970 Original Rust Free body Parts got the hinges and light housings!! just let me know about the doors, very serious!! thanks!! __________________ Ryan

10-16-2011, 12:16 AM	#15
SILVER_WS6 Account Suspended Join Date: May 2011 Location: 67-72 HQ Posts: 103	Re: 1970 Original Rust Free body Parts Ever come to kokomo? I need a pass fender for my 72 Blazer/...

10-16-2011, 02:16 AM	#18
SILVER_WS6 Account Suspended Join Date: May 2011 Location: 67-72 HQ Posts: 103	Re: 1970 Original Rust Free body Parts No worries. Welcome home.> Get some rest.. Im ready to paypal anytime just cant come get it as im in Afghan for the time..

10-16-2011, 07:48 PM	#20
hatred Registered User Join Date: Jun 2010 Location: Denham Springs, La. Posts: 257	Re: 1970 Original Rust Free body Parts I'll take both door. PM me some payment info Bro. __________________ 05 QSM GTO - M6, Corsa, King Springs 70 SWB CST - 350/Auto, Foose 18/17 I upset whiners too....

10-16-2011, 08:16 PM	#21
speedfreak369 Registered User Join Date: Nov 2009 Location: GA/AL Posts: 290	Re: 1970 Original Rust Free body Parts if falls throough....ill take both doors... zip.30157 pm me if it comes to me __________________ 1965 c10 short stepside (dad's project) 1967 c10 fleetside 350/350 trans (my baby)

10-17-2011, 12:03 PM	#23
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1970 Original Rust Free body Parts Primered/hugger orange doors sold to BUILDINGA68... Great guy...Have a safe trip home!!!! Still have fenders... got solid pass. side door $100. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

10-17-2011, 12:38 PM	#24
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1970 Original Rust Free body Parts few more Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-17-2011, 02:06 PM	#25
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 1970 Original Rust Free body Parts Dude I need a passenger side fender and a good tailgate without the trim holes on the fender or the tailgate. Lol Posted via Mobile Device __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.