CA Chevy/GMC Custom Rolling Air Ride Chassis

[ortegamotor]

This would be perfect for someone looking to build a project on a budget. This is a 63-72 lwb frame with all new components in the rear it is a full Air suspension with 7" bags , all bolt on and ready to transfer to a short bed frame or Blazer. the front is all new rotors , calipers ,Lowered spindles, all the bushings on the upper and lower control arms , as well as 7" bags to boot. this chassis will sit pretty low. i am selling as a full rolling chassis But if you're just interested in the front suspension, or the rear set up , or just the frame PM Me .I had plans on bolting all the components on to my 70 Blazer but that idea changed . now it's your chance to get your ride on the right track. The chassis includes everything you see in the picture. the quality of the frame work and welding are very nice. all work was performed by one of our fellow member here on the board that has build several Award winning trucks , that have been seen in some of the popular Truck Magazines.

$2300.obo

please feel free to PM with any questions you may have. thank you for your time. WILLING TO PART OUT!

Tony




SOLD......SOLD SOLD!!!!!!!!!!!

[ortegamotor]

here are some more pictures for you.

[ortegamotor]

here are a few more.

[ortegamotor]

here are a few more

[ortegamotor]

ttt

[ortegamotor]

made a few changes to the listing.

[lolife99]

What year are the actual frame rails?
63-66 is different than 67-72.

The front crossmember appears to have 73-87 a-arms.
Any idea what year the spindles are?

[ortegamotor]

Originally Posted by lolife99

What year are the actual frame rails?
63-66 is different than 67-72.

The front crossmember appears to have 73-87 a-arms.
Any idea what year the spindles are?

Hey There,

So the frame is a long wheel base 63-68 , and the front spindles are 73-87 and its all new parts rotor to rotor. Tony

[lolife99]

Originally Posted by ortegamotor

Hey There,

So the frame is a long wheel base 63-68 , and the front spindles are 73-87 and its all new parts rotor to rotor. Tony

I assume you meant 63-66.

[ortegamotor]

Originally Posted by lolife99

I assume you meant 63-66.

yes 63-66.

[ortegamotor]

ttt

[ortegamotor]

comes complete , or will part out. thanks for looking.

[chad64chevy]

how much for all four bags and front plates?

[superflysteiny]

tony you are selling it

[grwnded71]

Whats the difference from '63-'66 frames to '67-'72?

[superflysteiny]

Not much bumper horns and width of rear ends
Posted via Mobile Device

[chad64chevy]

front bumper frame horns, rear cab mounts, and the rear ends are 3" wider 1.5" each side!!

[ortegamotor]

Originally Posted by chad64chevy

front bumper frame horns, rear cab mounts, and the rear ends are 3" wider 1.5" each side!!

Thanks for the info you guys , every bit helps. Now keep in mind if i were to break this chassis up i will sell the rear lowering components all together and that also includes the rear end so the complete set up is bags,brackets,hardware,stabilizer bar , shocks, the 5 lug rear end , and the two rear wheels and tires.$1400

the frame can be purchased all on its own as well for $400

the front lowering set up includes upper and lower control arms, air bags , mounting plates, hardware, rotors, lowered spindles ,calipers , all bushing that go with it, and cross member as well as the two front tires and wheels . all you need to do is bolt it right on to your frame and you're on your way. $1000

or you can just purchase the complete set up for $2300

pm me with any questions. Tony

[ortegamotor]

ttt

[ortegamotor]

Parting out so let me know what you're interested in.

[VA72C10]

How much for the spindles shipped to 23112 will take them pending price

Which brand bags and those shipped with front brackets?

wheels and tires shipped?

[superflysteiny]

Bump for a great guy
Posted via Mobile Device

[gimmy 64]

how much for the rear end air suspension parts-not the actual rear end? thanks

[ortegamotor]

Originally Posted by gimmy 64

how much for the rear end air suspension parts-not the actual rear end? thanks

hey Jimmy, all the rear suspension parts , brackets ,shocks,hardware, panhard , basically everything you see except the frame, rear end ,and wheels. you looking at $900. you're here in California so shipping per Grey Hound , or you could pick up. Let me know.
Tony

[ortegamotor]

Originally Posted by VA72C10

How much for the spindles shipped to 23112 will take them pending price

Which brand bags and those shipped with front brackets?

wheels and tires shipped?

Hey there,

so you're looking at all four wheels and tires , spindles rotors, calipers, Front bags, mounting plates and hardware. you're looking at $1100.00 plus shipping via Grey Hound. i would have to get a quote for that. i would have to ship each tire /rim ,separately , i could box the spindle-rotor-caliper together. and the bags and plates+hardware could ship in one box as well so you're looking at seven individual packages. PM with your address so i can get the quote. Tony