NC Overload Springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70-Chevy · 11-07-2011, 02:31 PM

I have a set of overload springs and all brackets that came off my 1970 c-10 1/2 ton.

If anyone is interested, let me know. I can send pictures if needed.

$15 + shipping.

dan s · 11-07-2011, 09:46 PM

Are these for leaf spring or coil? If for leaf Iam interested pending pics and shipping quote to 14534. Thanks Dan

70-Chevy · 11-07-2011, 10:36 PM

Dan, they are for a coil rear. Sorry I didnt specify.

**WIDESIDE72** · 11-08-2011, 03:07 AM

Are these the factory type 1/2 leaves? If so, what would shipping to Leander TX 7861 be? Could you post photos, please?

70-Chevy · 11-08-2011, 01:16 PM

Wideside, I will take photos for you tonight when I get home and also figure out shipping. If you look in my build thread in my signature and go to the last pictures, you will see a photo of them before I removed them from the truck.

Let me know if those pictures answer your questions.

**FL71C10** · 11-08-2011, 04:12 PM

I would like to get in line in 2nd spot for those. Interested pending shipping to 32803 (business address) and woud like to see some pics off the truck as well.

Thanks!

John

70-Chevy · 11-09-2011, 02:23 PM

FL71C10, I got you in line.

I got home late last night and didnt get a chance to get the photos for you guys.

If you guys can hang with me for the next couple days, I'll be sure to get them to you.

Thanks,

**WIDESIDE72** · 11-09-2011, 03:31 PM

I looked at the photos in your build thread and they are what I am looking for. All I ned is a shipping quote to Leander TCx 78641

70-Chevy · 11-10-2011, 03:17 PM

WIDESIDE.
Here is the quote I recieved.

UPS Ground 1:00 P.M.
Friday
November 11, 2011
By End of Day,
Wednesday
November 16, 2011 19.86 USD *

Days In Transit: 3 Schedule by
12:00 P.M.
Friday
November 11, 2011 Billable Weight:
10.0 lbs.

Let me know if you think that is OK and you still want to proceed.

**WIDESIDE72** · 11-10-2011, 03:25 PM

So we are looking at $35 shipped? If so, I will take them.

70-Chevy · 11-10-2011, 03:55 PM

WIDESIDE,

Two things:

I just got home, went to the garage, and took these photos for you.

1. On one bracket, the piece that mounts to the frame looks like it was cut. I didnt see this before for some reason, but I at least wanted to make you aware of it. If you dont want them, I completely understand. This was my fault for not seeing it.

2. I measured the springs and I will need a box 24x24x6 and I estimated roughly 20 pounds after physically picking them up. I guessed on the 20 pounds. USPS is still telling me $20.16 to ship.

If you want them still, I will take the hit on the shipping costs to uphold my word. Let me know if you want them and PM me your address. I will ship them today.

**WIDESIDE72** · 11-10-2011, 11:48 PM

Can you tell what the purpose of the cut was?

70-Chevy · 11-11-2011, 03:52 PM

I honestly cant. They were on the truck when I bought it 8 years ago and I just now noticed it after taking them off.

I cant tell you that there are 4 bolts that go into the side of each bracket and 4 for the bottom of each bracket. With that one bracket being minus one hole, you will still have 7 bolts in it. It never moved for me or ever presented a problem, but it is up to you if you would still like them.

Just let me know.

Coley · 11-12-2011, 06:35 PM

Hi 70 Chevy.
I'm fairly new here but if possible I wouldn't mind being next in line for a shot at these if they aren't gone yet.
Thanks!
Coley

70-Chevy · 11-13-2011, 01:50 AM

Coley,
Not a problem to put you in line for these, but it will be after FL71C10.

Here is the line order:
1: WideSide
2: FL71C10
3: Coley

I havnt heard from WideSide in a couple days, but I will give him until Monday evening to let me know if he wants them or not.

FL71C10, are you still interested if WideSide doesnt want them?

**FL71C10** · 11-13-2011, 05:47 AM

[QUOTE=70-Chevy;5006523]Coley,
Not a problem to put you in line for these, but it will be after FL71C10.

Here is the line order:
1: WideSide
2: FL71C10
3: Coley

I havnt heard from WideSide in a couple days, but I will give him until Monday evening to let me know if he wants them or not.

FL71C10, are you still interested if WideSide doesnt want them?[/QUOTE

No, I'll pass and give coley my spot.
Posted via Mobile Device

70-Chevy · 11-13-2011, 09:57 AM

Thanks FL.

Coley,
I will wait for WideSide to reply and give him until Monday night to let me know if he wants them.

**WIDESIDE72** · 11-14-2011, 03:19 PM

I will pass. After I thouht about it more, I have too many other irons in the fire.

70-Chevy · 11-14-2011, 06:51 PM

Coley,
Still want them? PM me your address and I will get you a shipping quote.

Coley · 11-15-2011, 12:36 AM

Roger that 70-Chevy....pm sent.
Many Thanks!!
Coley

*waner80* · 12-02-2011, 11:59 PM

i have a set of these as well ill take 50 for them shipped anywhere in the 48

11-07-2011, 02:31 PM	#1
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Overload Springs I have a set of overload springs and all brackets that came off my 1970 c-10 1/2 ton. If anyone is interested, let me know. I can send pictures if needed. $15 + shipping. __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-07-2011, 09:46 PM	#2
dan s Registered User Join Date: Jan 2010 Location: Ormond Beach Florida Posts: 156	Re: Overload Springs Are these for leaf spring or coil? If for leaf Iam interested pending pics and shipping quote to 14534. Thanks Dan

11-07-2011, 10:36 PM	#3
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Overload Springs Dan, they are for a coil rear. Sorry I didnt specify. __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-08-2011, 03:07 AM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Overload Springs Are these the factory type 1/2 leaves? If so, what would shipping to Leander TX 7861 be? Could you post photos, please?

11-08-2011, 01:16 PM	#5
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Overload Springs Wideside, I will take photos for you tonight when I get home and also figure out shipping. If you look in my build thread in my signature and go to the last pictures, you will see a photo of them before I removed them from the truck. Let me know if those pictures answer your questions. __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-08-2011, 04:12 PM	#6
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: Overload Springs I would like to get in line in 2nd spot for those. Interested pending shipping to 32803 (business address) and woud like to see some pics off the truck as well. Thanks! John __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

11-09-2011, 02:23 PM	#7
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Overload Springs FL71C10, I got you in line. I got home late last night and didnt get a chance to get the photos for you guys. If you guys can hang with me for the next couple days, I'll be sure to get them to you. Thanks, __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-09-2011, 03:31 PM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Overload Springs I looked at the photos in your build thread and they are what I am looking for. All I ned is a shipping quote to Leander TCx 78641

11-10-2011, 03:17 PM	#9
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Overload Springs WIDESIDE. Here is the quote I recieved. UPS Ground 1:00 P.M. Friday November 11, 2011 By End of Day, Wednesday November 16, 2011 19.86 USD * Days In Transit: 3 Schedule by 12:00 P.M. Friday November 11, 2011 Billable Weight: 10.0 lbs. Let me know if you think that is OK and you still want to proceed. __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-10-2011, 03:25 PM	#10
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Overload Springs So we are looking at $35 shipped? If so, I will take them.

11-10-2011, 03:55 PM	#11
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Overload Springs WIDESIDE, Two things: I just got home, went to the garage, and took these photos for you. 1. On one bracket, the piece that mounts to the frame looks like it was cut. I didnt see this before for some reason, but I at least wanted to make you aware of it. If you dont want them, I completely understand. This was my fault for not seeing it. 2. I measured the springs and I will need a box 24x24x6 and I estimated roughly 20 pounds after physically picking them up. I guessed on the 20 pounds. USPS is still telling me $20.16 to ship. If you want them still, I will take the hit on the shipping costs to uphold my word. Let me know if you want them and PM me your address. I will ship them today. Attached Images __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-10-2011, 11:48 PM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Overload Springs Can you tell what the purpose of the cut was?

11-11-2011, 03:52 PM	#13
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Overload Springs I honestly cant. They were on the truck when I bought it 8 years ago and I just now noticed it after taking them off. I cant tell you that there are 4 bolts that go into the side of each bracket and 4 for the bottom of each bracket. With that one bracket being minus one hole, you will still have 7 bolts in it. It never moved for me or ever presented a problem, but it is up to you if you would still like them. Just let me know. __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-12-2011, 06:35 PM	#14
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: Overload Springs Hi 70 Chevy. I'm fairly new here but if possible I wouldn't mind being next in line for a shot at these if they aren't gone yet. Thanks! Coley

11-13-2011, 01:50 AM	#15
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Overload Springs Coley, Not a problem to put you in line for these, but it will be after FL71C10. Here is the line order: 1: WideSide 2: FL71C10 3: Coley I havnt heard from WideSide in a couple days, but I will give him until Monday evening to let me know if he wants them or not. FL71C10, are you still interested if WideSide doesnt want them? __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985



Register or Log In To remove these advertisements.

11-13-2011, 05:47 AM	#16
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: Overload Springs [QUOTE=70-Chevy;5006523]Coley, Not a problem to put you in line for these, but it will be after FL71C10. Here is the line order: 1: WideSide 2: FL71C10 3: Coley I havnt heard from WideSide in a couple days, but I will give him until Monday evening to let me know if he wants them or not. FL71C10, are you still interested if WideSide doesnt want them?[/QUOTE No, I'll pass and give coley my spot. Posted via Mobile Device __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

11-13-2011, 09:57 AM	#17
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Overload Springs Thanks FL. Coley, I will wait for WideSide to reply and give him until Monday night to let me know if he wants them. __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-14-2011, 03:19 PM	#18
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Overload Springs I will pass. After I thouht about it more, I have too many other irons in the fire.

11-14-2011, 06:51 PM	#19
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Overload Springs Coley, Still want them? PM me your address and I will get you a shipping quote. __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-15-2011, 12:36 AM	#20
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: Overload Springs Roger that 70-Chevy....pm sent. Many Thanks!! Coley

12-02-2011, 11:59 PM	#21
waner80 Account Suspended Join Date: Nov 2011 Location: sanford nc. Posts: 12	Re: Overload Springs i have a set of these as well ill take 50 for them shipped anywhere in the 48

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.