![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Aug 2007
Location: Mountain View, Alberta, Canada
Posts: 415
|
corvette style straight down dump ram horn manifolds
After spending almost my entire Friday evening looking at posts on the ram horn manifolds I have decided that I am going that route.
Does anybody up here in western Canada have a used set of the 2 1/2 inch straight down dump style OEM style ram horn manifolds for me to put in my 73 4x4? I know we can get aftermarket manifolds but like the GM stamp! I would also consider the 2 inch straight dump if the experts here thought that would be acceptable. The engine is actually a 305 with no horsepower mods and none planned. It might get upgraded to a 350 crate motor down the road but no real horsepower mods planned for that one either. Also if I went with the 2 inch diameter it sounds like the manifolds that are swept back a bit would also work. These are the ones that came stock in our 2x4 trucks up to 72. They may give me a bit more room for the exhaust pipes. I have heard that things sometimes get a little tight around the starter with the straight down 2 1/2 inch dump. Anybody have any experience with the 2 inch swept back ram horns in a 4x4? I also do not want or need any generator mounting brackets and really do not want to cut any off. Please let me know how much and where you are at so I can figure costs. Thanks in advance. 56hotrodred (Barry) |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|