Chucks SWB Fleetside - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**thelonerife** · 12-19-2011, 02:10 PM

I think your right. I should be painting it right now though. I think thats whats got me bummed.

faribran · 12-19-2011, 02:33 PM

good to see that u are retaining the Quadrajet..... looking good.

**thelonerife** · 12-19-2011, 03:16 PM

Yes I am for now. I have an Edelbrock intake, 1406 carb and some old eddie finned valve covers that I may put on one day but for now its just going to be stock.

I like quads and haven't had any problems out of the ones I've had in the past. I've gotten a few rebuilt by a friend and they always performed good.

**thelonerife** · 12-19-2011, 03:19 PM

I just ordered some new stuff from lmc. door sill plates, tranny cooling line, interior blue paint for my door panels and top of the dash. Maybe I should have gotten two cans but we'll see.

71Sleeper · 12-19-2011, 08:23 PM

This is awesome! I am glad you have decided to keep the truck.

duallyjams · 12-21-2011, 09:20 AM

I was this close to hitting the buy it now button. This is simple to nice of a truck to let go. The only thing that stopped me was I just bought a 65 swb bbw for the wife Christmas present as a surprise.

I will be stalking this build.

**thelonerife** · 12-22-2011, 11:06 PM

Congrats Duallyjams. Post some pics.
I got a little done today. I painted my radiator,shroud,clutch hole plug, trim over the door panels.
I also got my order from LMC. The stainless sill plates, tranny cooling lines, and the paint for the interior. I installed the cooling lines. I painted the defrost vents with the blue paint but it didn't match the color. You can see in the pic that its much lighter than the door panels. I'll keep looking for the correct color.

I also started cleaning my starter. Its covered with grease. Heres some pics.

**thelonerife** · 12-22-2011, 11:09 PM

more pics

Zoomin · 12-23-2011, 12:17 AM

I sure am glad you snapped out of it - I enjoy watching your progress.
Posted via Mobile Device

**thelonerife** · 12-23-2011, 12:55 AM

Quote:

Originally Posted by Zoomin

I sure am glad you snapped out of it - I enjoy watching your progress.
Posted via Mobile Device

LOL I cranked up some Merle Haggards greatest hits that threw me back into the seventies When I got there I cranked some Metallica. I'm BACK!

mcbassin · 12-23-2011, 01:02 AM

Quote:

Originally Posted by thelonerife

LOL I cranked up some Merle Haggards greatest hits that threw me back into the seventies When I got there I cranked some Metallica. I'm BACK!

Dang Chuck, that sounds like my Ipod

Nice progress! I'm glad to hear you're pressing on.

duallyjams · 12-23-2011, 09:03 AM

Waiting on the transporter to deliver the 65. I will be cruising craigslist thou because of your build I want one.

**thelonerife** · 12-23-2011, 10:39 PM

Quote:

Originally Posted by duallyjams

Waiting on the transporter to deliver the 65. I will be cruising craigslist thou because of your build I want one.

Well post a pic when you get it. I'll keep an eye out for one. I may get to work on mine tomorrow. We did our last minute running round today-all day lol.

**thelonerife** · 12-26-2011, 11:14 PM

I did a little today. I took off the grille and painted the core support. I had welded the gmc headlight bucket holders on a while back but didn't paint it then. And I put the condenser and drier on. Also the lines for them. I need to clean up a hood latch and get it put on.

VA72C10 · 12-26-2011, 11:30 PM

Looking good!

**thelonerife** · 12-27-2011, 02:38 AM

Thanks. The paint was still a little tacky in the pic. It looks splotchy. I'll check it tomorrow.

duallyjams · 12-27-2011, 09:35 AM

I see you bought another tail gate.

**thelonerife** · 12-27-2011, 09:31 PM

Quote:

Originally Posted by duallyjams

I see you bought another tail gate.

I did. I think it'll be my back up in case I need it. There are not too many 67-68s left. I have another one thats pretty dented. I am thinking about doing something with it but haven't made my mind up yet.

**thelonerife** · 12-29-2011, 10:09 PM

I started the fuel filler plugging on the cab. I first cut out the inner lip so I could work it easier if I had to. And I did a little bit. I will clean up the inner part later. I welded it in and its ready for a skim coat of filler. I also cut the center vent hole for the air conditioner vent. I need to do the side vents next. I took off the trim on the fenders and primed the white part of them. I snapped some pics while I had it outside.

**67cheby** · 12-29-2011, 10:10 PM

Nice work
Posted via Mobile Device

**thelonerife** · 12-29-2011, 10:16 PM

more pics

VA72C10 · 12-30-2011, 12:46 AM

Nice work! Looks good! Must be a real joy working with all that nice sheetmetal

**thelonerife** · 12-30-2011, 01:37 AM

Quote:

Originally Posted by 67cheby

Nice work
Posted via Mobile Device

Thank You !!

**thelonerife** · 12-30-2011, 01:48 AM

Quote:

Originally Posted by VA72C10

Nice work! Looks good! Must be a real joy working with all that nice sheetmetal

Thanks. So far the metals good. lol

**thelonerife** · 12-30-2011, 03:55 AM

I'm gonna need some sanding blocks. Anybody have some suggestions? I've been looking at Dura blocks. I'll need a long block and a med. size.

12-19-2011, 02:10 PM	#476
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside I think your right. I should be painting it right now though. I think thats whats got me bummed. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

12-19-2011, 02:33 PM	#477
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Chucks SWB Fleetside good to see that u are retaining the Quadrajet..... looking good. __________________ "

12-19-2011, 03:16 PM	#478
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside Yes I am for now. I have an Edelbrock intake, 1406 carb and some old eddie finned valve covers that I may put on one day but for now its just going to be stock. I like quads and haven't had any problems out of the ones I've had in the past. I've gotten a few rebuilt by a friend and they always performed good. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

12-19-2011, 03:19 PM	#479
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside I just ordered some new stuff from lmc. door sill plates, tranny cooling line, interior blue paint for my door panels and top of the dash. Maybe I should have gotten two cans but we'll see. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

12-19-2011, 08:23 PM	#480
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: Chucks SWB Fleetside This is awesome! I am glad you have decided to keep the truck. __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

12-21-2011, 09:20 AM	#481
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Chucks SWB Fleetside I was this close to hitting the buy it now button. This is simple to nice of a truck to let go. The only thing that stopped me was I just bought a 65 swb bbw for the wife Christmas present as a surprise. I will be stalking this build. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-22-2011, 11:06 PM	#482
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside Congrats Duallyjams. Post some pics. I got a little done today. I painted my radiator,shroud,clutch hole plug, trim over the door panels. I also got my order from LMC. The stainless sill plates, tranny cooling lines, and the paint for the interior. I installed the cooling lines. I painted the defrost vents with the blue paint but it didn't match the color. You can see in the pic that its much lighter than the door panels. I'll keep looking for the correct color. I also started cleaning my starter. Its covered with grease. Heres some pics. Attached Images __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

12-22-2011, 11:09 PM	#483
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside more pics Attached Images __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

12-23-2011, 12:17 AM	#484
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Chucks SWB Fleetside I sure am glad you snapped out of it - I enjoy watching your progress. Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

12-23-2011, 09:03 AM	#487
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Chucks SWB Fleetside Waiting on the transporter to deliver the 65. I will be cruising craigslist thou because of your build I want one. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-26-2011, 11:14 PM	#489
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside I did a little today. I took off the grille and painted the core support. I had welded the gmc headlight bucket holders on a while back but didn't paint it then. And I put the condenser and drier on. Also the lines for them. I need to clean up a hood latch and get it put on. Attached Images __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

12-26-2011, 11:30 PM	#490
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Chucks SWB Fleetside Looking good! __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-27-2011, 02:38 AM	#491
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside Thanks. The paint was still a little tacky in the pic. It looks splotchy. I'll check it tomorrow. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

12-27-2011, 09:35 AM	#492
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Chucks SWB Fleetside I see you bought another tail gate. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-29-2011, 10:09 PM	#494
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside I started the fuel filler plugging on the cab. I first cut out the inner lip so I could work it easier if I had to. And I did a little bit. I will clean up the inner part later. I welded it in and its ready for a skim coat of filler. I also cut the center vent hole for the air conditioner vent. I need to do the side vents next. I took off the trim on the fenders and primed the white part of them. I snapped some pics while I had it outside. Attached Images __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687



Register or Log In To remove these advertisements.

12-29-2011, 10:10 PM	#495
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Chucks SWB Fleetside Nice work Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-29-2011, 10:16 PM	#496
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside more pics Attached Images __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

12-30-2011, 12:46 AM	#497
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Chucks SWB Fleetside Nice work! Looks good! Must be a real joy working with all that nice sheetmetal __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-30-2011, 03:55 AM	#500
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Chucks SWB Fleetside I'm gonna need some sanding blocks. Anybody have some suggestions? I've been looking at Dura blocks. I'll need a long block and a med. size. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.