68 Four door build - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 12-19-2011, 10:26 PM

Do it......

Ridnhi · 12-19-2011, 10:27 PM

Not sure if I missed this but as bad as the new truck was smashed are you going to have to straighten the frame at all?

hgs_notes · 12-19-2011, 10:32 PM

Quote:

Originally Posted by tomsprojects

I'm kind of kicking some thing around here and I figured would run it bye every one to see what people think. I'm thinking suicide doors in the rear sence I have that new body extra cab with those hinges that I would hate to go to waste. Please let me know what every one thinks.
Posted via Mobile Device

Can't think of a reason not to as long as you have the ability. I don't, so it wouldn't be a good idea for me. But I will strongly endorse someone else to make it happen.

docrock · 12-19-2011, 10:43 PM

that would be very cool.
would use handles or hide the second handle inside the front door jamb?

**67cheby** · 12-19-2011, 11:54 PM

i personally dont care for suicide doors unless it is a radical custom , just my 2 cents, depends on what overall look you are going for

VA72C10 · 12-20-2011, 12:46 AM

I'm not a fan on most vehicles but I did see these on a crew cab and it seemed to make rear entry easier/more convenient.

tomsprojects · 12-20-2011, 02:22 AM

Quote:

Originally Posted by Ridnhi

Not sure if I missed this but as bad as the new truck was smashed are you going to have to straighten the frame at all?

The frame checked out great. I measured it all out with no problems.
Posted via Mobile Device

feller · 12-20-2011, 03:09 AM

that would be alright i have wondered what they would be like on these trucks

tomsprojects · 12-20-2011, 03:43 AM

Here is what Im looking at using.

tomsprojects · 12-20-2011, 03:47 AM

Here is the newest project I brought into the shop yesterday, dont know what Im doing with it yet...............MAYBE A 2WD ON THE GROUND?

tomsprojects · 12-20-2011, 04:50 AM

May be some thing like this.

Does any one know who owns this?

**67cheby** · 12-20-2011, 10:14 AM

dont know who owns it ....but i like it !!

luis979motoring · 12-20-2011, 10:16 AM

Quote:

Originally Posted by tomsprojects

May be some thing like this.

Does any one know who owns this?

man that is nice!

FRENCHBLUE72 · 12-20-2011, 10:34 AM

That belongs to brad2 on the board he is from Oklahoma I do believe and its still not finished yet as far as I know..

PHAT TONY · 12-20-2011, 10:58 PM

Quote:

Originally Posted by tomsprojects

May be some thing like this.

Does any one know who owns this?

Holy-Jeeze...if you have that much drive when you're done the 4 door, I'll ship you some of my junk to help keep you occupied!

tomsprojects · 12-24-2011, 03:37 AM

Here is the gauge cluster Im going to use out of the 2011 silverado , I will make a bezel like the original 68 but with the holes to line up with this cluster.I think this will look pretty good and function great with the digital read out of my new running gear.

tomsprojects · 12-24-2011, 04:00 AM

If any one cares here are a few more cars I have been working on at work, the first one is a AC Bristol, the second one is a Ferrari Daytonarace car with a v12.

**67cheby** · 12-24-2011, 10:27 AM

WOW...and WOW, great idea on the guages to use them and build a factory looking panel for them !

sleepertruck72 · 12-24-2011, 05:03 PM

I like the idea of the 2wd Blazer Slammed, I think the gauges look awesome, and I dig those race cars you are working on ! Looks like alot of fun

docrock · 12-24-2011, 09:59 PM

http://www.c4classics.com/1972-4x4-c...-332/img_6835/
Check this burb out. Before you cut the nice one.

jbclassix · 12-25-2011, 02:36 AM

I'm in for this one!

All these 4 door builds on here recently have me chompin at the bit to get back to mine!!

68 TT · 12-25-2011, 04:10 AM

Looks like the 07-up cluster and heater controls lend themselves more to our trucks than the 99-06 stuff does.

Nice project. Keep it up.

68 TT · 12-25-2011, 04:13 AM

Quote:

Originally Posted by jbclassix

I'm in for this one!

All these 4 door builds on here recently have me chompin at the bit to get back to mine!!

x2

I'd like to build a 4-door Suburban with a reduced wheel base & rear overhang to make it fit onto a 2000-up Tahoe chassis.

tomsprojects · 12-26-2011, 01:34 AM

Well I finally had some time today to work on my 4 door project and work I did.

tomsprojects · 12-26-2011, 01:36 AM

more pics....................................................

12-19-2011, 10:26 PM	#151
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 68 Four door build Do it...... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-19-2011, 10:27 PM	#152
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: 68 Four door build Not sure if I missed this but as bad as the new truck was smashed are you going to have to straighten the frame at all? __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

12-19-2011, 10:43 PM	#154
docrock Registered User Join Date: Jun 2010 Location: Encinitas, CA Posts: 534	Re: 68 Four door build that would be very cool. would use handles or hide the second handle inside the front door jamb? __________________ 1954 GMC on 93 Silverado chassis http://67-72chevytrucks.com/vboard/s...d.php?t=408344 1942 Chevy 1/2 ton Pickup http://67-72chevytrucks.com/vboard/s...d.php?t=429494 R.I.P. TOM SEFFRON 68 FOUR DOOR http://67-72chevytrucks.com/vboard/s...d.php?t=495438 1942 Chevy that ate my brain 70 Chassis https://67-72chevytrucks.com/vboard/...d.php?t=835250

12-19-2011, 11:54 PM	#155
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68 Four door build i personally dont care for suicide doors unless it is a radical custom , just my 2 cents, depends on what overall look you are going for __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-20-2011, 12:46 AM	#156
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 68 Four door build I'm not a fan on most vehicles but I did see these on a crew cab and it seemed to make rear entry easier/more convenient. __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-20-2011, 03:09 AM	#158
feller Registered User Join Date: Feb 2011 Location: madison, IN. Posts: 484	Re: 68 Four door build that would be alright i have wondered what they would be like on these trucks

12-20-2011, 03:43 AM	#159
tomsprojects Registered User Join Date: Nov 2011 Location: san diego ca Posts: 234	Re: 68 Four door build Here is what Im looking at using. Attached Images

12-20-2011, 03:47 AM	#160
tomsprojects Registered User Join Date: Nov 2011 Location: san diego ca Posts: 234	Re: 68 Four door build Here is the newest project I brought into the shop yesterday, dont know what Im doing with it yet...............MAYBE A 2WD ON THE GROUND? Attached Images Last edited by tomsprojects; 12-20-2011 at 04:13 AM.

12-20-2011, 04:50 AM	#161
tomsprojects Registered User Join Date: Nov 2011 Location: san diego ca Posts: 234	Re: 68 Four door build May be some thing like this. Does any one know who owns this? Attached Images

12-20-2011, 10:14 AM	#162
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68 Four door build dont know who owns it ....but i like it !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-20-2011, 10:34 AM	#164
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 68 Four door build That belongs to brad2 on the board he is from Oklahoma I do believe and its still not finished yet as far as I know.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-24-2011, 03:37 AM	#166
tomsprojects Registered User Join Date: Nov 2011 Location: san diego ca Posts: 234	Re: 68 Four door build Here is the gauge cluster Im going to use out of the 2011 silverado , I will make a bezel like the original 68 but with the holes to line up with this cluster.I think this will look pretty good and function great with the digital read out of my new running gear. Attached Images

12-24-2011, 04:00 AM	#167
tomsprojects Registered User Join Date: Nov 2011 Location: san diego ca Posts: 234	Re: 68 Four door build If any one cares here are a few more cars I have been working on at work, the first one is a AC Bristol, the second one is a Ferrari Daytonarace car with a v12. Attached Images

12-24-2011, 10:27 AM	#168
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68 Four door build WOW...and WOW, great idea on the guages to use them and build a factory looking panel for them ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-24-2011, 05:03 PM	#169
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 68 Four door build I like the idea of the 2wd Blazer Slammed, I think the gauges look awesome, and I dig those race cars you are working on ! Looks like alot of fun __________________ 72 C20 Longbed 05 1500 Z71



Register or Log In To remove these advertisements.

12-24-2011, 09:59 PM	#170
docrock Registered User Join Date: Jun 2010 Location: Encinitas, CA Posts: 534	Re: 68 Four door build http://www.c4classics.com/1972-4x4-c...-332/img_6835/ Check this burb out. Before you cut the nice one. __________________ 1954 GMC on 93 Silverado chassis http://67-72chevytrucks.com/vboard/s...d.php?t=408344 1942 Chevy 1/2 ton Pickup http://67-72chevytrucks.com/vboard/s...d.php?t=429494 R.I.P. TOM SEFFRON 68 FOUR DOOR http://67-72chevytrucks.com/vboard/s...d.php?t=495438 1942 Chevy that ate my brain 70 Chassis https://67-72chevytrucks.com/vboard/...d.php?t=835250

12-25-2011, 02:36 AM	#171
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 68 Four door build I'm in for this one! All these 4 door builds on here recently have me chompin at the bit to get back to mine!! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

12-25-2011, 04:10 AM	#172
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: 68 Four door build Looks like the 07-up cluster and heater controls lend themselves more to our trucks than the 99-06 stuff does. Nice project. Keep it up. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

12-26-2011, 01:34 AM	#174
tomsprojects Registered User Join Date: Nov 2011 Location: san diego ca Posts: 234	Re: 68 Four door build Well I finally had some time today to work on my 4 door project and work I did. Attached Images

12-26-2011, 01:36 AM	#175
tomsprojects Registered User Join Date: Nov 2011 Location: san diego ca Posts: 234	Re: 68 Four door build more pics.................................................... Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.