AR WTB, 1/4 inch to 3/8 push lock fittings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 12-23-2011, 12:56 PM

anyone have any stainless push lock fittings, need elbow 1/4 to 3/8 push lock, also need a inline dryer , and 3/8 to 3/8 bulk head push lock fittings , new or used in nice condition ! vendors or anyone have anything ?

big_al_71 · 12-23-2011, 01:08 PM

Mike this is the place where I buy everything I need when it comes to air lines, fittings, hydraulics etc......

http://www.parker.com/portal/site/PA...&Wtky=FITTINGS

**67cheby** · 12-23-2011, 01:18 PM

thanks i will check that out

**67cheby** · 12-23-2011, 01:26 PM

i cant find the push lock stuff on their sight ???

**67cheby** · 12-24-2011, 12:26 PM

ttt

**67cheby** · 12-25-2011, 12:29 PM

Ttt
Posted via Mobile Device

1968SWBBigBlock · 12-25-2011, 02:59 PM

http://www.mcmaster.com/#

Try this place - they do a good job with all kinds of items

**67cheby** · 12-26-2011, 10:31 AM

tried the mcmaster, site was very user friendly, quickly found the exact parts i was looking for....but.......$77 bucks apiece !!! WOWZERS !!

**67cheby** · 12-26-2011, 11:30 AM

ok i finally found the parker part #'s , parker male elbow, 90 deg, NP brass, 3/8 in (parker W169PLP-6-4) that is a parker nickel plated brass 90 degree swivel elbow , looks like they are 6-7 bucks apiece , just incase anyone else is loooking for them also

Coley · 12-26-2011, 12:35 PM

As well, I highly recommend (and use) SMC push-in fittings all the time.
Very reasonably priced and pro-quality. Check out www.smcusa.com
...well worth a look.
Coley

**67cheby** · 12-27-2011, 03:05 PM

got the Parker ones from a local company, $4.35 apiece, in stock

12-23-2011, 12:56 PM	#1
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	WTB, 1/4 inch to 3/8 push lock fittings anyone have any stainless push lock fittings, need elbow 1/4 to 3/8 push lock, also need a inline dryer , and 3/8 to 3/8 bulk head push lock fittings , new or used in nice condition ! vendors or anyone have anything ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-23-2011, 01:08 PM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: WTB, 1/4 inch to 3/8 push lock fittings Mike this is the place where I buy everything I need when it comes to air lines, fittings, hydraulics etc...... http://www.parker.com/portal/site/PA...&Wtky=FITTINGS __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

12-23-2011, 01:18 PM	#3
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB, 1/4 inch to 3/8 push lock fittings thanks i will check that out __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-23-2011, 01:26 PM	#4
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB, 1/4 inch to 3/8 push lock fittings i cant find the push lock stuff on their sight ??? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-24-2011, 12:26 PM	#5
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB, 1/4 inch to 3/8 push lock fittings ttt __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-25-2011, 12:29 PM	#6
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB, 1/4 inch to 3/8 push lock fittings Ttt Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-25-2011, 02:59 PM	#7
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: WTB, 1/4 inch to 3/8 push lock fittings http://www.mcmaster.com/# Try this place - they do a good job with all kinds of items __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

12-26-2011, 10:31 AM	#8
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB, 1/4 inch to 3/8 push lock fittings tried the mcmaster, site was very user friendly, quickly found the exact parts i was looking for....but.......$77 bucks apiece !!! WOWZERS !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-26-2011, 11:30 AM	#9
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB, 1/4 inch to 3/8 push lock fittings ok i finally found the parker part #'s , parker male elbow, 90 deg, NP brass, 3/8 in (parker W169PLP-6-4) that is a parker nickel plated brass 90 degree swivel elbow , looks like they are 6-7 bucks apiece , just incase anyone else is loooking for them also __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-26-2011, 12:35 PM	#10
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: WTB, 1/4 inch to 3/8 push lock fittings As well, I highly recommend (and use) SMC push-in fittings all the time. Very reasonably priced and pro-quality. Check out www.smcusa.com ...well worth a look. Coley __________________ ....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500

12-27-2011, 03:05 PM	#11
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB, 1/4 inch to 3/8 push lock fittings got the Parker ones from a local company, $4.35 apiece, in stock __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.