GA Need a Quick Sale - Complete 68 rolling frame

[funkytechmonkey]

Hey guys... This weekend I am taking the cab, body and drive tran out off the 68 and I have got to get the frame out of my garage and driveway. This has been my daily driver for 6 months now. It is a GREAT suspension rides and drives pretty awesome. I am moving everything over to my new frame with dropmember and air ride, so I dont need this frame any more. HOA will not allow me to keep it outside and I need the room. I really need to sell it this weekend. Local pickup. Sorry I dont have pics of the full frame I will post up any pics you need. Here are a few that I have taken.

It is a complete frame with the following:

- CPP 5/7 static drop
- mild c-notch
- KYB front shocks
- bilstein rear shocks
- 5 lug conversion
- disc on front drum on rear
- rear (think its blazer) side fill tank
- staggered rallys
- Front tires - Yokohoma 215 75/15
- Rear tires - Yokohoma 265 75/15
- Do not know what gears in rear axel, non-posi
- All gas and break lines are installed and ready to go. Stainless lines
- Exhaust will stay under it. (Exhaust has been sold. Reduced price)
- All steering components will stay on it.
- Comes with the break booster, master cylinder and portion valve. They are still on it.
- Comes with power steering pump and box
- Sorry I have to keep the driveshaft.

This frame was blasted down and restored about 7 years ago. It will clean up REALLY NICE! Really with just a rag some water. I dont want to part it out. bc I dont want to be stuck with all these extra parts. This will be perfect for someone if you are looking for a completely driveable frame with everything on it. If I cant sell it quick I may just take it to my dads and hang onto it for a future build. Either way.. I have got to get it out of here.

$1400 FIRM
I am pretty firm on this price. I may be able to work with you a little bit but not much. If I cant get what I am asking for it I will just find a place to store it. About the only thing I would take as trade are firearms or some body and paint work. This has to be top quality paint and body work. I havent been cheap on this build and I wont start with the paint and body... I am super picky and very anal about the work done on my truck.

Any questions or pics needed just let me know.

Gotta post this before my battery dies... Will update more later when I find my charger.

[funkytechmonkey]

Here are the only pics I have at this time. The pics dont really do the frame justice. Its very clean and so are all the suspension components.

[funkytechmonkey]

Here is the stance of the truck.

[funkytechmonkey]

Anyone interested?

I hit a few sections of this frame with purple power and this thing is super clean. It looks as if it was por-15ed. Very shiny... Actually looks better than the frame I built. Motor and tranny were taken out today so I can get more pics of the front if you need them. I've got to get this thing out of here by this weekend.
Posted via Mobile Device

[funkytechmonkey]

Frame is out and ready to roll onto a trailor. I have the break booster and master cylinder for sale on another thread, if you pick the frame up before they sale I will include it in the purchase.

Make me an offer.

[CC69Rat]

If I knew it wouldn't cost me more in lawyer fees, etc.. than it would to buy the frame I'd buy it.

Seriously, I'd like to have it. Good deal for someone especially if you have a good solid cab to put on it.

[funkytechmonkey]

It really is a good deal (I think) I'm pressure washing it now and I'll post up more pics later.
Posted via Mobile Device

[funkytechmonkey]

pics

[funkytechmonkey]

more

[funkytechmonkey]

The only parts that have paint chips or slight rust are where the bed hits the frame and where the bumpers mounted in the rear. The housing for the axel cleaned up really nice and the frame looks great just for a pressure wash... a little more elow greese with soap and water and it will shine. The second pic in the thread above this one I hit with soap and water and you can see how shinny and clean it is.

[Midniteotto]

Originally Posted by CC69Rat

If I knew it wouldn't cost me more in lawyer fees, etc.. than it would to buy the frame I'd buy it.

Seriously, I'd like to have it. Good deal for someone especially if you have a good solid cab to put on it.

Exactly... I just asked again and was denied, she said you just went to GA and bought a frame, use that one...

[funkytechmonkey]

I don't know if there is any rule against this on the forums I looked and didn't see it. But I will take guns as partial trade. I'm looking for a good hunting rifle or good pistol really would like a 1911. If you have something nice let me know.
Posted via Mobile Device

[CC69Rat]

Brian -- If you still have it in a few weeks I might talk to you, but I don't want to promise anything. Prob closer to a month really ..

I'd really like to have it. I'm thinking about selling my S10 to build a Daily C10. .. but the money is just not in the right place right now. Have you thought about a 10x20 for a month or two? .. Me or not, it might buy you some time. $100 bucks to buy 8 weeks of time .. you might come out better than taking less of an offer for the frame.

This would be perfect for a running, driving LWB cab, relatively stock dependable engine, trans swap and just drive it in primer / hot rod black. A set of Coys or 338's and drive the wheels off of it.

[funkytechmonkey]

10x20? I dont think I understand...

What kinda s10 do you have? I am always up for trades.

[CC69Rat]

10x20 storage building

I found a 96 S10 about a year and a half ago. An older guy had it. White / Tan, ext cab fleetside 4.3 5spd. When I bought it, it had Auto Zone chrome hubcaps and a camper top on it. 50k original miles. Clean and straight.

At the time I had just sold a 69 Camaro and was just looking for a sharp daily driver. I had an extra set of 17" TT 2's so I threw them on it. Belltech drop 3/3, Bilstien shocks, billet alignment kit for the carrier bearing, billet drop blocks, pinion corrected, etc. Rides like a new one. SSBC discs on the front, new Nitto 555s on the front. 74k miles now. Nicer than any 2003 I have ever seen.

Not sure what I want to do yet, but you need a good daily driver now, right?

http://67-72chevytrucks.com/vboard/s...d.php?t=506986

Posted via Mobile Device

[funkytechmonkey]

The s10 is a little out of my price range. I put it on Craigslist too. I've got a ton of people interested but I haven't seen any cash yet.
Posted via Mobile Device

[sanford66]

Great deal for someone! If it was a LWB, and you were closer, we would be talking! Joseph

[speedfreak369]

dang dang dang..... wish i had the funds.

bump for a deal

[funkytechmonkey]

Thanks for the bump speedfreak.

[Red65C10]

Bump - Brian, If you get to the point you want to part out, Im might be interested in the front end to convert mine from 6 lug to 5 with disc.

[MikeCofield]

interested check pms

[funkytechmonkey]

Pm returned. Lots of people interested but haven't seen any cash yet. I posted it on Craigslist and its been unreal how many calls I get about it. Maybe someone will pick it up this weekend.
Posted via Mobile Device

[funkytechmonkey]

Posted via Mobile Device

[72freak]

Originally Posted by funkytechmonkey

Pm returned. Lots of people interested but haven't seen any cash yet. I posted it on Craigslist and its been unreal how many calls I get about it. Posted via Mobile Device

Good luck with the sale! I too had a lot of interest in my 5 lug frame and it took 9 months to sell mine.

[chopnchaneled]

Guys,,,,,, I just got back from Brians on another matter and all i can
say is that the chassis is a REAL deal. The only reason i didn't jump on it
is i just did mine six months ago. It looks great.

Just did the math and for what he's offering you could not build your own
set up like it for that kind of money.