which engine do I have - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beeroh · 09-07-2003, 10:34 PM

I am not sure which engine the truck has. Is there a sure way to find out?

It has blue valve covers,
v8
not sure if its a 350 or 305

are there any numbers on the block that could tell me?
Thanks

Russell · 09-07-2003, 11:10 PM

if you look at your dash from the outside, then you'll see a number stamped onto a little metal plate, this is called a VIN, or vehicle identification number, then find a VIN decoder online and you can find out what type of engine your truck came with from the factory.

beeroh · 09-07-2003, 11:14 PM

the engine isn't stock

there is supposedly an engine that was installed three years ago

Russell · 09-07-2003, 11:22 PM

Hmm, there may be a serial on the block, I doubt that someone would install a 305 though, I would guess it to be a 350, but yeah, check the block for any information...

**68 Stepside** · 09-08-2003, 01:13 AM

in front of the passenger side head, or behind the alternator in other words, there's a small pad. About 1" by 4" or something along those lines. There should be a bunch of numbers stamped into it. If you can get those numbers, we can tell you what the engine is.

Good luck.

09-07-2003, 10:34 PM	#1
beeroh Registered User Join Date: Sep 2003 Location: Atascadero, CA. Posts: 149	which engine do I have I am not sure which engine the truck has. Is there a sure way to find out? It has blue valve covers, v8 not sure if its a 350 or 305 are there any numbers on the block that could tell me? Thanks __________________ 84 Silverado,

09-07-2003, 11:10 PM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	if you look at your dash from the outside, then you'll see a number stamped onto a little metal plate, this is called a VIN, or vehicle identification number, then find a VIN decoder online and you can find out what type of engine your truck came with from the factory. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-07-2003, 11:14 PM	#3
beeroh Registered User Join Date: Sep 2003 Location: Atascadero, CA. Posts: 149	the engine isn't stock there is supposedly an engine that was installed three years ago __________________ 84 Silverado,

09-07-2003, 11:22 PM	#4
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Hmm, there may be a serial on the block, I doubt that someone would install a 305 though, I would guess it to be a 350, but yeah, check the block for any information... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-08-2003, 01:13 AM	#5
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	in front of the passenger side head, or behind the alternator in other words, there's a small pad. About 1" by 4" or something along those lines. There should be a bunch of numbers stamped into it. If you can get those numbers, we can tell you what the engine is. Good luck. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.