MD '72 Door Panel Trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 02-10-2012, 09:44 AM

All barbs are intact and stainless is in great shape...$25 + shipping. Postal money order:

**special-K** · 02-28-2012, 07:52 PM

Ttt

RCbowtie69 · 02-28-2012, 09:50 PM

I'll will take the trim,pending on shipping to 27360,HeavyMetalChevy has a set of door panels that needs trim for them.Thanks Randy

HeavyMetalChevy · 02-28-2012, 11:15 PM

No hard feelings bully!!! lol... You may have helped us both out here sir!

**special-K** · 02-29-2012, 09:04 AM

No problem. I'll see what shipping will run and get back to you.

**special-K** · 02-29-2012, 02:28 PM

It looks like I can do $32 shipped Priority Mail.

RCbowtie69 · 02-29-2012, 10:21 PM

DONE,i'll take them if i can get the door panels from HeavyMetalChevy,Thanks Randy

**special-K** · 03-01-2012, 07:20 AM

Sounds good,Randy. If it works out you need these send me a PM with your shipping info. I'll return a PM with my address for the money order...Thanks (I hope). They're all boxed up and ready to go.

**special-K** · 03-02-2012, 09:47 AM

I just saw his thread. It looked like you made the deal. Are we still on?

RCbowtie69 · 03-02-2012, 12:17 PM

Got your PM.I just reply to HeavyMetalChevy thread for his address.Thanks Randy

RCbowtie69 · 03-02-2012, 12:24 PM

I sent you a PM,thanks Randy

Delta9 · 03-03-2012, 05:22 AM

if any1 finds another set of these let me know HMC already knows im looking
Thanks,
Ken

**special-K** · 03-03-2012, 08:29 AM

Ok Randy,I sent one back...thanks

Ken,I'll keep you in mind. I do have three olive door panels...so one odd spare. I'll have to look,but a spray paint can got pierced and wigged out and got one panel. I know another panel has a broken corner. So,if the broken one is the same side as the one that got sprayed I'd remover the trim. I'll send you a PM if it works out that way. It was primer and would clean off of the stainless easily.

Delta9 · 03-03-2012, 08:34 AM

Quote:

Originally Posted by special-K

Ok Randy,I sent one back...thanks

Ken,I'll keep you in mind. I do have three olive door panels...so one odd spare. I'll have to look,but a spray paint can got pierced and wigged out and got one panel. I know another panel has a broken corner. So,if the broken one is the same side as the one that got sprayed I'd remover the trim. I'll send you a PM if it works out that way. It was primer and would clean off of the stainless easily.

ok post pics with price and im sure i'll be taking them off your hands for ya

HeavyMetalChevy · 03-03-2012, 10:45 AM

Quote:

Originally Posted by Delta9

ok post pics with price and im sure i'll be taking them off your hands for ya

Ken... I have the door panels silly... The ones I showed pics of will be yours..lol

Delta9 · 03-03-2012, 11:44 AM

HMC im pretty sure he's gonna take the trim off for me, or at least thats what i was asking, lol

Delta9 · 03-03-2012, 12:08 PM

Special-K i only need the trim for the door panel, just trying to clear this all up

**special-K** · 03-04-2012, 10:25 AM

I think everything was perfectly clear until "someone" poked their nose into this.

Delta9 · 03-04-2012, 12:26 PM

Special-K do you take PayPal? bcuz i got another offer for some panel trim, but i dont like to do money orders.

**special-K** · 03-04-2012, 05:43 PM

No,I don't take PayPal,so go ahead with the others. That's fine with me. I'd rather keep the trim with panels anyway.

**29od1** · 03-04-2012, 06:24 PM

I'd send you a money order for them for $32 if they're back up for sale pending pics?
Thanks,
David

RCbowtie69 · 03-05-2012, 09:35 PM

Hey Tim sent money order out tonight,Thanks again.

**special-K** · 03-05-2012, 09:46 PM

Quote:

Originally Posted by 29od1

I'd send you a money order for them for $32 if they're back up for sale pending pics?
Thanks,
David

I already sold the ones this thread was started for.The second pair that Delta 9 wanted I am actually glad he found an excuse to back out of. I actually needed a pair myself for the door panels I just installed in my '72. I had them for over 20 years all wrapped up and when I unwrapped them I realized they had no trim. I had to rob the trim from the olive panels described above and now have panels with no trim...so sorry,no spare available here.

Quote:

Originally Posted by RCbowtie69

Hey Tim sent money order out tonight,Thanks again.

Cool beans! See what I posted above? I'm getting senile and selling parts I need for my own truck

. Oh well,I robbed the ones and now have some not so great door panels with no trim. Maybe I can create something artistic with them...heh heh

**29od1** · 03-05-2012, 10:03 PM

Quote:

I actually needed a pair myself for the door panels I just installed in my '72.

No problem man, I understand.

HeavyMetalChevy · 03-08-2012, 02:59 PM

Quote:

Originally Posted by RCbowtie69

Hey Tim sent money order out tonight,Thanks again.

Quote:

Originally Posted by RCbowtie69

Got your PM.I just reply to HeavyMetalChevy thread for his address.Thanks Randy

ok now I am confused.... The $32.00 money order just showed up at my house for the trim... I guess I will be putting it in another envelope and sending it your way Tim... wonder if you got mine???

02-10-2012, 09:44 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	'72 Door Panel Trim All barbs are intact and stainless is in great shape...$25 + shipping. Postal money order: Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-28-2012, 07:52 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '72 Door Panel Trim Ttt __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-28-2012, 09:50 PM	#3
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: '72 Door Panel Trim I'll will take the trim,pending on shipping to 27360,HeavyMetalChevy has a set of door panels that needs trim for them.Thanks Randy __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e, Last edited by RCbowtie69; 02-28-2012 at 10:06 PM.

02-28-2012, 11:15 PM	#4
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: '72 Door Panel Trim No hard feelings bully!!! lol... You may have helped us both out here sir! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-29-2012, 09:04 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '72 Door Panel Trim No problem. I'll see what shipping will run and get back to you. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-29-2012, 02:28 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '72 Door Panel Trim It looks like I can do $32 shipped Priority Mail. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-29-2012, 10:21 PM	#7
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: '72 Door Panel Trim DONE,i'll take them if i can get the door panels from HeavyMetalChevy,Thanks Randy __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

03-01-2012, 07:20 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '72 Door Panel Trim Sounds good,Randy. If it works out you need these send me a PM with your shipping info. I'll return a PM with my address for the money order...Thanks (I hope). They're all boxed up and ready to go. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-02-2012, 09:47 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '72 Door Panel Trim I just saw his thread. It looked like you made the deal. Are we still on? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-02-2012, 12:17 PM	#10
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: '72 Door Panel Trim Got your PM.I just reply to HeavyMetalChevy thread for his address.Thanks Randy __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

03-02-2012, 12:24 PM	#11
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: '72 Door Panel Trim I sent you a PM,thanks Randy __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

03-03-2012, 05:22 AM	#12
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: '72 Door Panel Trim if any1 finds another set of these let me know HMC already knows im looking Thanks, Ken

03-03-2012, 08:29 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '72 Door Panel Trim Ok Randy,I sent one back...thanks Ken,I'll keep you in mind. I do have three olive door panels...so one odd spare. I'll have to look,but a spray paint can got pierced and wigged out and got one panel. I know another panel has a broken corner. So,if the broken one is the same side as the one that got sprayed I'd remover the trim. I'll send you a PM if it works out that way. It was primer and would clean off of the stainless easily. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-03-2012, 11:44 AM	#16
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: '72 Door Panel Trim HMC im pretty sure he's gonna take the trim off for me, or at least thats what i was asking, lol

03-03-2012, 12:08 PM	#17
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: '72 Door Panel Trim Special-K i only need the trim for the door panel, just trying to clear this all up



Register or Log In To remove these advertisements.

03-04-2012, 10:25 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '72 Door Panel Trim I think everything was perfectly clear until "someone" poked their nose into this. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-04-2012, 12:26 PM	#19
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: '72 Door Panel Trim Special-K do you take PayPal? bcuz i got another offer for some panel trim, but i dont like to do money orders.

03-04-2012, 05:43 PM	#20
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '72 Door Panel Trim No,I don't take PayPal,so go ahead with the others. That's fine with me. I'd rather keep the trim with panels anyway. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-04-2012, 06:24 PM	#21
29od1 Registered User Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: '72 Door Panel Trim I'd send you a money order for them for $32 if they're back up for sale pending pics? Thanks, David Last edited by 29od1; 03-04-2012 at 07:18 PM. Reason: Clarification of terms

03-05-2012, 09:35 PM	#22
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: '72 Door Panel Trim Hey Tim sent money order out tonight,Thanks again. __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.