The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-20-2012, 11:09 PM   #1
jyphotog
Registered User
 
Join Date: Feb 2012
Location: Acworth
Posts: 9
Fenders for 67?

Hey guys. I have been looking for fenders for my 67. Would any fender from 67-72 work?

Thanks!
jyphotog is offline   Reply With Quote
Old 02-20-2012, 11:10 PM   #2
jyphotog
Registered User
 
Join Date: Feb 2012
Location: Acworth
Posts: 9
Re: Fenders for 67?

Oops. 1967 Chevy C10!
jyphotog is offline   Reply With Quote
Old 02-20-2012, 11:12 PM   #3
BMERDOC
Registered User
 
BMERDOC's Avatar
 
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
Re: Fenders for 67?

67-68 Chevys and I think all GMCs. The only difference is the addition of the sidemarker lights
__________________
Nick Carter
1967 C10 Short bed Fleetside
Project Cheap Thrills!
2WD C10 Modern/Performance Alignments
Easiest Alignment Ever!
BMERDOC is offline   Reply With Quote
Old 02-20-2012, 11:16 PM   #4
jyphotog
Registered User
 
Join Date: Feb 2012
Location: Acworth
Posts: 9
Re: Fenders for 67?

All GMC's from 67-72?
jyphotog is offline   Reply With Quote
Old 02-20-2012, 11:26 PM   #5
c1069
Registered User
 
c1069's Avatar
 
Join Date: Apr 2010
Location: McFarland CA
Posts: 1,392
Re: Fenders for 67?

67 gmc are the same as 67 Chevy, also all gmc will work unless you need to shave side marker light.
Posted via Mobile Device
__________________
Pancho

69 c/10 step side 454/400 with 3.07
c1069 is offline   Reply With Quote
Old 02-21-2012, 12:51 AM   #6
sameyrasmea72
Senior Member
 
sameyrasmea72's Avatar
 
Join Date: Aug 2003
Location: Lubbock, Texas
Posts: 2,443
Re: Fenders for 67?

Not counting the side markers, here is the difference between 67-68 chevy/all GMC and the 69-72 chevy fenders.
Attached Images
  
__________________
72 Cheyenne Super
80 Silverado Blazer 2wd
sameyrasmea72 is offline   Reply With Quote
Old 02-21-2012, 09:29 AM   #7
jyphotog
Registered User
 
Join Date: Feb 2012
Location: Acworth
Posts: 9
Re: Fenders for 67?

Quote:
Originally Posted by sameyrasmea72 View Post
Not counting the side markers, here is the difference between 67-68 chevy/all GMC and the 69-72 chevy fenders.
I seen this pic before just not to sure of what the difference is.
Posted via Mobile Device
jyphotog is offline   Reply With Quote
Old 02-21-2012, 09:42 AM   #8
GCncsuHD
Charlie Daniels w/ a Tq Wrench
 
GCncsuHD's Avatar
 
Join Date: May 2009
Location: Statesville, NC
Posts: 1,570
Re: Fenders for 67?

Quote:
Originally Posted by jyphotog View Post
I seen this pic before just not to sure of what the difference is.
Posted via Mobile Device
Look at the grille/headlight bucket area, they are nothing alike. 67 and 68 fenders are interchangeable, just keep in mind the added sidemarkers of the 68, you can either add them, or shave the hole.
__________________
ΜΟΛΩΝ ΛΑΒΕ
67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works
69 K5 Blazer-Family Beach Cruiser Project
78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s
SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s
GCncsuHD is offline   Reply With Quote
Old 02-21-2012, 12:37 PM   #9
jyphotog
Registered User
 
Join Date: Feb 2012
Location: Acworth
Posts: 9
Re: Fenders for 67?

I see what you are saying. What style GMC would I be looking for?
jyphotog is offline   Reply With Quote
Old 02-21-2012, 12:55 PM   #10
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: Fenders for 67?

Any 67-72 GMC. The GMC fenders never changed, they only added different styles of trim over the nose of the fender, but as mentioned above, any 68-72 fender will have the hole for the marker light, and you'd have to weld all of the holes for the trim the GMC's used around the nose of the fender.
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Old 02-21-2012, 01:01 PM   #11
jyphotog
Registered User
 
Join Date: Feb 2012
Location: Acworth
Posts: 9
Re: Fenders for 67?

Quote:
Originally Posted by 67ChevyRedneck View Post
Any 67-72 GMC. The GMC fenders never changed, they only added different styles of trim over the nose of the fender, but as mentioned above, any 68-72 fender will have the hole for the marker light, and you'd have to weld all of the holes for the trim the GMC's used around the nose of the fender.
Ok, so my best bet is to stick with a 67-68 Chevy.

They are hard to find for a reasonable price.
jyphotog is offline   Reply With Quote
Old 02-21-2012, 01:51 PM   #12
old Chevy guy
Registered User
 
old Chevy guy's Avatar
 
Join Date: Apr 2007
Location: Foster Rhode Island
Posts: 1,176
Re: Fenders for 67?

If they are Gmc you can use 67-72.67 will not have a marker light.68 chevy will be the same as 68-72 gmc,they all have the marker. You can use it on your 67 but if you want it to be acurate you have to close up the hole for the light. If you dont care put it on with the light or some sidemarkers are just reflectors no wireing involved. Most people won't know the diffrence unless they are really into these trucks.
old Chevy guy is offline   Reply With Quote
Old 02-21-2012, 02:01 PM   #13
CC69Rat
Registered User
 
CC69Rat's Avatar
 
Join Date: Jan 2011
Location: Chattanooga TN
Posts: 6,210
Re: Fenders for 67?

67 - GMC (no side marker light)
67 - Chevrolet (no side marker light)
-----------------------------------
^^ these are the same, but very tough to find that aren't rusty


68-72 GMC - Same all the way through with the exception of the added marker light hole. It was a Government mandate in 68 to add the side marker.

68 Chevrolet - Single year fender, with Side Marker light but the same as 68-72 GMC. Passenger side with a good cup = almost impossible to find.

69-72 Chevrolet - Has the side marker light but the front part of the fender is completely different due to the grille change in 69+ Chevrolet styling.


West Coast fenders are your best bet. Do you need 67 = No side marker, or with a side marker light hole? Do you have side markers on the back fenders or no?
__________________
Chad

1967 C10 SWB - Project Savannah - 6.0/4L80 *Currently underway*
1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy
1986 Silverado Short Fleet - Scarlet *Sold*
1985 Silverado Short Fleet *Sold*
2022 Jeep Gladiator Mojave
2001 Jeep Cherokee XJ 4x4 - Lifted, Built
1992 Jeep Cherokee XJ 4x4 - Lifted
2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)
CC69Rat is offline   Reply With Quote
Old 02-21-2012, 03:01 PM   #14
jyphotog
Registered User
 
Join Date: Feb 2012
Location: Acworth
Posts: 9
Re: Fenders for 67?

Quote:
Originally Posted by CC69Rat View Post
67 - GMC (no side marker light)
67 - Chevrolet (no side marker light)
-----------------------------------
^^ these are the same, but very tough to find that aren't rusty


68-72 GMC - Same all the way through with the exception of the added marker light hole. It was a Government mandate in 68 to add the side marker.

68 Chevrolet - Single year fender, with Side Marker light but the same as 68-72 GMC. Passenger side with a good cup = almost impossible to find.

69-72 Chevrolet - Has the side marker light but the front part of the fender is completely different due to the grille change in 69+ Chevrolet styling.


West Coast fenders are your best bet. Do you need 67 = No side marker, or with a side marker light hole? Do you have side markers on the back fenders or no?
Honestly, I am just trying to do the bodywork, paint it, and flip it.
jyphotog is offline   Reply With Quote
Old 02-21-2012, 04:20 PM   #15
Achevytruck
Account Suspended
 
Join Date: Feb 2012
Location: Alva FL
Posts: 197
Re: Fenders for 67?

Hear a 1967 chevy truck one [IMG]
Achevytruck is offline   Reply With Quote
Old 02-21-2012, 04:21 PM   #16
Achevytruck
Account Suspended
 
Join Date: Feb 2012
Location: Alva FL
Posts: 197
Re: Fenders for 67?

[IMG][/IMG] Sorry about that hear the 1967 chevy truck one
Achevytruck is offline   Reply With Quote
Old 02-21-2012, 07:29 PM   #17
jyphotog
Registered User
 
Join Date: Feb 2012
Location: Acworth
Posts: 9
Re: Fenders for 67?

I found two used fenders for 150!
jyphotog is offline   Reply With Quote
Old 02-21-2012, 08:24 PM   #18
michael bustamante
Senior Member
 
michael bustamante's Avatar
 
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,858
Re: Fenders for 67?

WHERES ACWORTH? i HAVE 2 67 FENDERS IN NEED OF BODYWORK
__________________
1967custom
michael bustamante is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com