|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-11-2012, 03:41 PM
|
#1 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
What did you get done daylight savings time edition 3/11/12
mine progresses slowly toward paint.. final primer and sanding this week and paint. Ordered a new slider and window gaskets lets see how it goes from here
How about you all?
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
03-11-2012, 04:01 PM
|
#2 |
|
Registered User
 Join Date: Nov 2010
Location: Venus Texas
Posts: 217
|
Re: What did you get done daylight savings time edition 3/11/12
Changed from 9.5 semifloat 4:10's to 10.5 fullfloat 3:73's. Much better, takes longer to shift out of first now, yeah!
|
|
|
|
|
03-11-2012, 04:18 PM
|
#3 |
|
Registered User
Join Date: Oct 2011
Location: hudson,wi
Posts: 805
|
Re: What did you get done daylight savings time edition 3/11/12
I removed the hood on my shorty and just got back from taking the old dry rotted tires off my rally rims. Hopefully I can get the rims out to my sandblasting / powdercoating guy and keep things moving.
I love this weekly thread........... It keeps me motivated and keeps my progress moving forward. I'll try and start posting pics along with my posts. RIZ 
|
|
|
|
|
03-11-2012, 04:18 PM
|
#4 |
|
Registered User
Join Date: Dec 2011
Location: mount airy NC
Posts: 308
|
Re: What did you get done daylight savings time edition 3/11/12
installed a new jvc radio
 Amazon.com: JVC KD-HDR40 CD Receiver with...
__________________
77 c10 (went from a inline 6 to 350) (converted to 3 speed in the floor) 350: mild cam, holley 600cfm 4bbl, summit stage 1 intake, accel billet distributer, flowtech headers, 2 1/4" exhaust with glasspacks, powermaster 160a alternator. |
|
|
|
|
03-11-2012, 04:19 PM
|
#5 |
|
Registered User
Join Date: Apr 2011
Location: corpus christi, tx - america's fattest city
Posts: 253
|
Re: What did you get done daylight savings time edition 3/11/12
Job, weather and life in general got in the way, so nothing. Knackers hauled off the old cab on Friday, does that count?
|
|
|
|
|
03-11-2012, 04:23 PM
|
#6 |
|
Spear and magic helmet!
Join Date: Oct 2006
Location: Nashville, TN
Posts: 1,226
|
Re: What did you get done daylight savings time edition 3/11/12
Changed oil and oil filter, which turned out to be quite the ordeal. I'm too low now to slide the pan underneath, so I had to remove the front air dam to have enough clearance to be able to drive it up on my ramps. Got it all done after I realized that, though.
As a bonus, I grabbed an air filter I've had on the shelf for 5+ years and it exactly fit my stock air cleaner. |
|
|
|
|
03-11-2012, 05:33 PM
|
#7 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Re: What did you get done daylight savings time edition 3/11/12
Mine got picked up today, and on its way to the paint and body shop. Heavy ole girl destroyed those allum ramps, fast! lol
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
|
03-11-2012, 05:41 PM
|
#8 | |
|
Registered User
Join Date: Jul 2010
Location: Hepburn Sask Canada
Posts: 56
|
Re: What did you get done daylight savings time edition 3/11/12
Got my motor running in my truck, still a lot to do but it sure is a motavator to hear it running again.
__________________
76 Chevy Crew Cab Build 6.2 Diesel with a Banks Turbo Turbo350c NP205 Dana 44 Front 14 Bolt Posi Rear Quote:
|
|
|
|
|
|
03-11-2012, 05:43 PM
|
#9 |
|
In the Forgotten far North.
Join Date: Jul 2007
Location: Anchorage, Alaska
Posts: 2,627
|
Re: What did you get done daylight savings time edition 3/11/12
Haven't got it done yet but I did get started on building some combination front LED park/turn signals with built in DRL's. Will post a write up on it later w/pics.
__________________
1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade |
|
|
|
|
03-11-2012, 06:11 PM
|
#10 |
|
Registered User
Join Date: Feb 2012
Location: Morgantown, Wv
Posts: 294
|
Re: What did you get done daylight savings time edition 3/11/12
Started to replace my water pump, power steering pump, and belts. I got every thing removed. Tomorrow I'll put it all back together.
|
|
|
|
|
03-11-2012, 07:01 PM
|
#11 |
|
Registered User
Join Date: Apr 2011
Location: Hartford CT
Posts: 223
|
Re: What did you get done daylight savings time edition 3/11/12
Replaced the thermostat on the 5.3, now I need to replace the water pump (no flow). Will do that later in the week
__________________
-Steve  1980 GMC C15 Sierra LWB Dark Carmine Red/Carmine Int Was: 250/3spd (1980-88), then a 305/TH350 (1988-2011) Now: 5.3/4L60E, 2.73 12-bolt open rear |
|
|
|
|
03-11-2012, 07:05 PM
|
#12 |
|
Registered User
Join Date: Sep 2002
Location: DFW Texas
Posts: 2,269
|
Re: What did you get done daylight savings time edition 3/11/12
Bought a couple 4x4's to flip. Yea, my wife isn't real happy.
       
|
|
|
|
|
03-11-2012, 07:17 PM
|
#13 |
|
Old Heap Driver
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,642
|
Re: What did you get done daylight savings time edition 3/11/12
Gave the Heap a little attention this weekend, wash, and new 225/60/15's on the front.
__________________
_____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver. |
|
|
|
|
03-11-2012, 07:42 PM
|
#14 |
|
Registered User
Join Date: Nov 2011
Location: Nashville TN
Posts: 3,595
|
Re: What did you get done daylight savings time edition 3/11/12
Wired int the cab corners with new monster speaker wire...Ran a true memory wire direct to the battery, ran all new wires to all audio...Including soon to be mounted kick panel speakers... Also installed my new slim mount Pioneer sub and box so I will be able to move the bench back
Did my first welding ever on inner fenders I got from pull a part with a 90 AMP flux core mig welder...Yeah it looks nasty but its a first...Also cleaned and coated one of the fender with undercoating... Mounted the CD plater with the metal metra bracket directly to the metal dash. Cut the dash bezel to fit over it when reinstalled and just pop the stereo ring on.. Also replaced the inline fuel filter which fixed issue with the carb
__________________
PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper
|
|
|
|
|
03-11-2012, 07:52 PM
|
#15 |
|
Registered User
Join Date: Jul 2010
Location: Hudsonville, MI
Posts: 174
|
Re: What did you get done daylight savings time edition 3/11/12
Replaced drivers door jamb switch so the dome light comes on when I open the door AND changed fuel filter on the quadrajet.....as an added bonus the gas inlet no longer drips gas on the intake due to using gasoline safe Teflon tape on the threads. Small things are sometimes very appreciated. Lol
Posted via Mobile Device
__________________
_______________________________________________ 1985 Chevy Scottsdale K20 350 with 700R4 running 3.42 gearing aka "The Honey Badger" 1993 Silverado C3500 Ext. Cab Dually 6.5 turbo diesel |
|
|
|
|
03-11-2012, 08:17 PM
|
#16 |
|
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,216
|
Re: What did you get done daylight savings time edition 3/11/12
Put the new tank in the Hoopty and planned on some crusing again..but now she is not pulling any gas from the
 tank. Gotta check out what I hooked up wrong  , or what died.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
03-11-2012, 08:24 PM
|
#17 |
|
Registered User
Join Date: Jul 2010
Location: Lafayette, IN
Posts: 622
|
Re: What did you get done daylight savings time edition 3/11/12
Finished buying the parts to do my rear disc swap on my Dana 70 Dually.
|
|
|
|
|
03-11-2012, 08:27 PM
|
#18 |
|
Registered User
Join Date: Dec 2009
Location: lindale,tx
Posts: 2,373
|
Re: What did you get done daylight savings time edition 3/11/12
Finally got the wifes 85 long bed to pass inspection.
Also installed the new hub caps we ordered. Also installed new water temp sensor and installed factory non-rednecked gauge cluster. Not registering oil psi and it has a new sender.......
__________________
82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle |
|
|
|
|
03-11-2012, 08:40 PM
|
#19 | |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Re: What did you get done daylight savings time edition 3/11/12
Quote:
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
|
|
03-11-2012, 09:55 PM
|
#20 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
|
Re: What did you get done daylight savings time edition 3/11/12
Not as much as I wanted but every little bit helps....
I got my old tires that were pulled off the Alcoa's I sold to rs72z for his CC project onto some replacement wheels. I was pretty happy that the most weight required for balancing was only 1.5oz which is pretty decent for such a tall/lg set-up (rears are 235/85-16's). I also got the front half of the new exhaust completed. I needed to 100% confirm placement & alignment so I can continue w/the remainder of the system. I'm building it in a 'modular' fashion so if/when the dually goes from lwb to swb, all that is required for the exhaust is a section gets un-fastened, shortend the appropriate amount, & then re-connects to the existing flanges (similar to my 'H' pipe arrangement). A couple pics of the replacement wheels when they were on a buddies shop truck (nothing special) & a few of the exhaust. I did all the fab work & tacked everything but had one of the contract welders @ my work do the final welding because of time constraints (his welds don't require clean-up while mine would have). A big thanks to my good friend & board member 'MattA' for his help w/swapping all the tires around....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
03-11-2012, 10:07 PM
|
#21 |
|
Registered User
Join Date: May 2011
Location: Bradford, PA
Posts: 395
|
Re: What did you get done daylight savings time edition 3/11/12
Replaced my passenger side fender. Also swore at it because it's leaking oil like the BP deepwater horizon.
__________________
1981
 K10 Scottsdale305 ci | TH350 | NP208 | 60k miles |
|
|
|
|
03-11-2012, 10:32 PM
|
#22 |
|
Registered User
Join Date: Apr 2009
Location: Waynesfield Ohio
Posts: 1,991
|
Re: What did you get done daylight savings time edition 3/11/12
Changed out the rear axle in the crew cab to an AAM 14 BOLT, out of a '04 2500HD. Will post pics later.
__________________
 1949 Five Window, 1973 Step Side, 2000 Z71 |
|
|
|
|
03-11-2012, 10:53 PM
|
#23 |
|
Registered User
Join Date: Oct 2011
Location: hudson,wi
Posts: 805
|
Re: What did you get done daylight savings time edition 3/11/12
I also picked up a mint tailgate for my shorty for $50..........Pretty pleased with the progress this weekend.
RIZ |
|
|
|
|
03-11-2012, 11:03 PM
|
#24 |
|
Registered User
Join Date: Nov 2011
Location: Nashville TN
Posts: 3,595
|
Re: What did you get done daylight savings time edition 3/11/12
i forgot to say I had the rear window seals replaced..it wasnt the same locking one but a rope one thats a lil smaller but it still looks nice n clean
__________________
PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper
|
|
|
|
|
03-11-2012, 11:07 PM
|
#25 |
|
GM Addicted
Join Date: Jan 2009
Location: Visalia, Ca
Posts: 2,294
|
Re: What did you get done daylight savings time edition 3/11/12
My Dad and I shaved the rear cab seam, painted my 73 gmc grill, straightened out a new goodmark hood that i bought dirt cheap because it sat outside and wire wheeled it down, now to strip it down to bare metal and prep it. filled up the tank not much fun any more but still cant resist to cruise around listening to oldies
__________________
 ..Mac’s Garage..73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
