KS parting out 72 GMC LB BB - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RN72GMC · 02-22-2012, 12:42 AM

yes i am interested do u think its easily fixable? also do u have both eyebrows left and right and the upper grill bar?

**Cash3481** · 02-22-2012, 12:54 AM

Quote:

Originally Posted by RN72GMC

yes i am interested do u think its easily fixable? also do u have both eyebrows left and right and the upper grill bar?

http://67-72chevytrucks.com/vboard/a...1&d=1327977822
You can see what's left of the grill eyebrows and such but the pressed in area by the ps light is hard to make out. Ds eyebrow is gone. I think it's fixable with any amount of skills greater than mine (not a lot). I'll take some better pics tomorrow at lunch if you need them sooner and are really interested, it's a 20 minute drive each way in my bb 72.
Mike
Posted via Mobile Device

RN72GMC · 02-22-2012, 01:00 AM

Quote:

Originally Posted by Cash3481

http://67-72chevytrucks.com/vboard/a...1&d=1327977822
You can see what's left of the grill eyebrows and such but the pressed in area by the ps light is hard to make out. Ds eyebrow is gone. I think it's fixable with any amount of skills greater than mine (not a lot). I'll take some better pics tomorrow at lunch if you need them sooner and are really interested, it's a 20 minute drive each way in my bb 72.
Mike
Posted via Mobile Device

how much you thinking for the grill? if its in good shape besides the push in part im very interested let me no no need to go out of your way for the pics i can wait tell you need to go out there to pull some parts

**Cash3481** · 02-22-2012, 01:19 AM

Quote:

Originally Posted by RN72GMC

how much you thinking for the grill? if its in good shape besides the push in part im very interested let me no no need to go out of your way for the pics i can wait tell you need to go out there to pull some parts

No trouble just dark when I go to work. I'll get pics tomorrow. Besides I have only had my bb on the road a few weeks. Love the sound and peaceful drive in the am. Not sure on price. Think about it and we can check shipping on it. Then we can figure out a fair price.

Mike
Posted via Mobile Device

**Cash3481** · 02-23-2012, 03:50 PM

TTT
Lots of things left in the last few pages of posts!
I will go to individual threads this weekend if no one cleans it all out by then.
Offers?

**Cash3481** · 02-24-2012, 12:20 AM

Quote:

Originally Posted by chewychevy67

i would appreciate that a lot. Rod.

I haven't forgot you! I will pm or post the picture I drew of the crossmember tomorrow at work.

Quote:

Originally Posted by William138

Just curious, how much to ship the valve covers to 78247?
Posted via Mobile Device

valve covers shipped at lunch today. I'll pm you the tracking tomorrow around lunch

Quote:

Originally Posted by RN72GMC

maybe to late but do u have any of the grill pieces still?

I have the pics but was out of town today. I'll post them tomorrow as well.
Posted via Mobile Device

**Cash3481** · 02-24-2012, 08:51 PM

Grill pics for Chewychevy
You can see the pushed in area inside from the headlight. I cant get a good pic of the small dent the size of a pencil reaser on the top but you can kind of see it in the first pic.

**Cash3481** · 02-25-2012, 05:18 PM

Chewychevy:
Here is the picture I drew for the crossmember for you. I just posted it in another thread for someone else that asked about it too.
I really hope it helps you out but remember, I am not a drafting expert or mechanical engineer.
http://67-72chevytrucks.com/vboard/s...d.php?t=510958

V/R,

Mike

dxevo · 02-28-2012, 04:10 AM

interested in tail light harness #29 if still avail. whats your best price shipped to 92706

tanman722001 · 02-28-2012, 05:35 AM

Do you have the radiator?If so what shape is it in?And if you do I will need the radiator mounts with it.Thanks

**Cash3481** · 02-28-2012, 07:45 AM

Quote:

Originally Posted by dxevo

interested in tail light harness #29 if still avail. whats your best price shipped to 92706

Tail light harness has t-taps where a trailer harness was added.
I'll do $30 shipped

Quote:

Originally Posted by tanman722001

Do you have the radiator?If so what shape is it in?And if you do I will need the radiator mounts with it.Thanks

radiator is gone, sorry!
Mike
Posted via Mobile Device

**michael bustamante** · 03-19-2012, 12:56 PM

Looking for the 400 trans throttle hookup stuff,

HotRod C/10 · 03-19-2012, 12:59 PM

Mike, was that crossmember riveted in?

back on Topic

**Cash3481** · 04-01-2012, 01:13 AM

sorry guys I didn't see these posts! I had some finals last week.

Quote:

Originally Posted by michael bustamante

Looking for the 400 trans throttle hookup stuff,

Gas pedal hookup Was sold unless there is something else you need. I have a partial harness but it broke where it goes into the molded plastic piece on the trans switch.

[QUOTE=DSALRAM;5261409]Mike, was that crossmember riveted in?
No it was bolted in and is sold. I'm updating the list again now. Sorry for any confusion.

Mike
Posted via Mobile Device

bigblocksean · 04-10-2012, 10:09 PM

Still have the complete 402? Interested if so.
Posted via Mobile Device

**Cash3481** · 04-10-2012, 10:42 PM

Quote:

Originally Posted by bigblocksean

Still have the complete 402? Interested if so.
Posted via Mobile Device

Yes I do still have it. Carb to oil pan. Manifolds are gone though.
Mike
Posted via Mobile Device

Satin69 · 04-10-2012, 10:50 PM

Need interior dome light lens to 75058 if you have it.

Thanks,
Joey
Posted via Mobile Device

**Cash3481** · 04-10-2012, 10:56 PM

Quote:

Originally Posted by Satin69

Need interior dome light lens to 75058 if you have it.

Thanks,
Joey
Posted via Mobile Device

Satin69: Joey, sorry it's sold with the harness.
Mike
Posted via Mobile Device

bigblocksean · 04-10-2012, 11:05 PM

Pulleys and brackets still on the 402?
Posted via Mobile Device

**Cash3481** · 04-10-2012, 11:17 PM

Quote:

Originally Posted by bigblocksean

Pulleys and brackets still on the 402?
Posted via Mobile Device

All sold already sorry!
Posted via Mobile Device

Satin69 · 04-10-2012, 11:20 PM

Ok, thank you.
Posted via Mobile Device

makamer · 04-11-2012, 10:13 AM

I may be interested in the carb. What is the number?

**Cash3481** · 04-11-2012, 06:46 PM

Quote:

Originally Posted by makamer

I may be interested in the carb. What is the number?

7042206 is the carb number, I'd like to sell the whole motor though.
Posted via Mobile Device

HeavyMetalChevy · 04-13-2012, 11:44 PM

47. Core Support-- $50.00 for the GMC pics??? also the black deluxe door panels available. How soon would engine need out of your way?

**Cash3481** · 04-14-2012, 12:13 AM

Quote:

Originally Posted by HeavyMetalChevy

47. Core Support-- $50.00 for the GMC pics??? also the black deluxe door panels available. How soon would engine need out of your way?

Il get some pics of the gmc core support tomorrow. Black panels are gone and I can palletize the motor for you... I assume you can work the shipping? I can hold it for a while it's under a doubled over tarp as well.how long are you thinking?
Mike
Posted via Mobile Device

02-22-2012, 12:42 AM	#201
RN72GMC Registered User Join Date: Jun 2009 Location: Redding, ca Posts: 61	Re: parting out 72 GMC LB BB yes i am interested do u think its easily fixable? also do u have both eyebrows left and right and the upper grill bar?

02-23-2012, 03:50 PM	#205
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB TTT Lots of things left in the last few pages of posts! I will go to individual threads this weekend if no one cleans it all out by then. Offers?

02-24-2012, 08:51 PM	#207
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Grill pics for Chewychevy You can see the pushed in area inside from the headlight. I cant get a good pic of the small dent the size of a pencil reaser on the top but you can kind of see it in the first pic. Attached Images Last edited by Cash3481; 02-24-2012 at 08:52 PM. Reason: added description.

02-25-2012, 05:18 PM	#208
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Chewychevy: Here is the picture I drew for the crossmember for you. I just posted it in another thread for someone else that asked about it too. I really hope it helps you out but remember, I am not a drafting expert or mechanical engineer. http://67-72chevytrucks.com/vboard/s...d.php?t=510958 V/R, Mike

02-28-2012, 04:10 AM	#209
dxevo Registered User Join Date: Feb 2009 Location: Orange County, Ca Posts: 55	Re: parting out 72 GMC LB BB interested in tail light harness #29 if still avail. whats your best price shipped to 92706

02-28-2012, 05:35 AM	#210
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: parting out 72 GMC LB BB Do you have the radiator?If so what shape is it in?And if you do I will need the radiator mounts with it.Thanks __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

03-19-2012, 12:56 PM	#212
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: parting out 72 GMC LB BB Looking for the 400 trans throttle hookup stuff, __________________ 1967custom

03-19-2012, 12:59 PM	#213
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: parting out 72 GMC LB BB Mike, was that crossmember riveted in? back on Topic __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

04-10-2012, 10:09 PM	#215
bigblocksean Registered User Join Date: Feb 2010 Location: Arkansas City, Kansas Posts: 33	Re: parting out 72 GMC LB BB Still have the complete 402? Interested if so. Posted via Mobile Device

04-10-2012, 10:50 PM	#217
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	Re: parting out 72 GMC LB BB Need interior dome light lens to 75058 if you have it. Thanks, Joey Posted via Mobile Device

04-10-2012, 11:05 PM	#219
bigblocksean Registered User Join Date: Feb 2010 Location: Arkansas City, Kansas Posts: 33	Re: parting out 72 GMC LB BB Pulleys and brackets still on the 402? Posted via Mobile Device

04-10-2012, 11:20 PM	#221
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	Re: parting out 72 GMC LB BB Ok, thank you. Posted via Mobile Device

04-11-2012, 10:13 AM	#222
makamer Registered User Join Date: Jun 2004 Location: Overland Park, KS Posts: 315	Re: parting out 72 GMC LB BB I may be interested in the carb. What is the number?

04-13-2012, 11:44 PM	#224
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: parting out 72 GMC LB BB 47. Core Support-- $50.00 for the GMC pics??? also the black deluxe door panels available. How soon would engine need out of your way? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.