![]() |
![]() |
#301 |
Registered User
Join Date: Sep 2010
Location: Olympia, WA
Posts: 736
|
Re: Post Your Straight Six Pics!
Mine looks like this
Attachment 878314 ...but imagine PS, PB, and 3 speed OD. I hope I have the chance to do this soon! Oh ya, the Chevrolet valve cover (the cherry on top). I pulled the valve cover off of a 64 with a 292 |
![]() |
![]() |
![]() |
#302 |
Registered User
Join Date: Mar 2004
Location: Hoytsville, Utah
Posts: 3,365
|
Re: Post Your Straight Six Pics!
When I first bought my Panel, it had a 230 in it. It ran OK, but with tons of blow-by. So I took it apart and one piston had a hole in it. I replaced it, and drove on. About a year later, I was driving down the freeway and something went bang and it started running a little rough. I made it on home and took the head off and everything looked OK. I turned the motor over by hand and the top of this piston didn't move. Whisky Tango Foxtrot? I then ran a self-tapper screw into it and pulled it out and this is what I found under it:
![]() ![]() ![]() I think that the PO who rebuilt it didn't gap the rings or something and this one got to the point where it cut the piston in two. I was just lucky that it didn't have a complete come-apart. I just replaced this piston and drove on again. When I ever get around to rebuilding that old 230, I'll get a whole new set of pistons! ![]() ![]() ![]()
__________________
'68 Panel Project Boogie Chillin' '68 C-10 Ol' Green |
![]() |
![]() |
![]() |
#303 | |
Six in a row makes it go...
![]() Join Date: Mar 2009
Location: Vacationland: Maine
Posts: 1,346
|
Re: Post Your Straight Six Pics!
Quote:
![]() ![]()
__________________
67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce |
|
![]() |
![]() |
![]() |
#304 |
Registered User
![]() Join Date: May 2011
Location: Long Island NY
Posts: 787
|
Re: Post Your Straight Six Pics!
|
![]() |
![]() |
![]() |
#305 | |
Registered User
Join Date: Sep 2010
Location: Olympia, WA
Posts: 736
|
Re: Post Your Straight Six Pics!
Quote:
Oh, I dont know....replacing one at a time seems to be working for ya! ![]() ...they are a durable/reliable breed! |
|
![]() |
![]() |
![]() |
#306 |
Registered User
Join Date: Mar 2012
Location: Hialeah
Posts: 6
|
Re: Post Your Straight Six Pics!
I joined this site because the 292 is a truck engine and someone directed me here, my 292 is in a '55 Chevy 150 4dr.
Pictures show the 235 coming out and the 292 in, before the swap the engine received a complete rebuilt, .30 over, 9to 1 pistons, mild cam, oversize valves, port and polish, lump kit, Clifford intake and exhaust and it will have a rebuilt Quadrajet. A 2004r was built for it. Project has been going slow but steady. |
![]() |
![]() |
![]() |
#307 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,255
|
Re: Post Your Straight Six Pics!
Carretera, who did your lump porting?
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
#308 | |
1962 C-10
Join Date: Apr 2005
Location: Las Vegas, New Mexico
Posts: 4,978
|
Re: Post Your Straight Six Pics!
Quote:
![]()
__________________
Joseph Chavez ![]() "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 |
|
![]() |
![]() |
![]() |
#309 |
1962 C-10
Join Date: Apr 2005
Location: Las Vegas, New Mexico
Posts: 4,978
|
Re: Post Your Straight Six Pics!
Here's the recently resurrected 250 in my '67. My buddy Abe gave me this engine when I bought the project. It had been sitting in his garage for years! It needed a little help from some trans fluid to fire up but now she runs great! Fires right up everytime...
![]()
__________________
Joseph Chavez ![]() "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 |
![]() |
![]() |
![]() |
#310 |
Registered User
Join Date: Mar 2012
Location: Hialeah
Posts: 6
|
Re: Post Your Straight Six Pics!
Neil, a friend and master mechanic that put the engine together for me. The lumps I bought from Mike, mrhotrod6@bellsouth.net.
|
![]() |
![]() |
![]() |
#311 | |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,255
|
Re: Post Your Straight Six Pics!
Quote:
I picked up an assembly- resto manual for the triple nickle Chevys at a used book store. What surprised me was the LX circuit design and even color code was very close to my '68 C/10 pick-up.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
|
![]() |
![]() |
![]() |
#312 |
Registered User
Join Date: Feb 2010
Location: Minot, ND
Posts: 8
|
Re: Post Your Straight Six Pics!
here is my 250 going in a 67 GMC long backed by a s10 T5 got the offy valve cover and side plates but waiting till I'm ready to put it in
|
![]() |
![]() |
![]() |
#313 | |
Six in a row makes it go...
![]() Join Date: Mar 2009
Location: Vacationland: Maine
Posts: 1,346
|
Re: Post Your Straight Six Pics!
Quote:
![]()
__________________
67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce |
|
![]() |
![]() |
![]() |
#314 |
Registered User
Join Date: Dec 2008
Location: EL PASO,TEJAS
Posts: 212
|
Re: Post Your Straight Six Pics!
What is an s10 t 5
Posted via Mobile Device
__________________
WITNESS ![]() Dont be like me be better than me ![]() |
![]() |
![]() |
![]() |
#315 |
Senior Member
![]() Join Date: Nov 2010
Location: Reseda CA
Posts: 1,273
|
Re: Post Your Straight Six Pics!
It's a mid to late 80's and early 90's 5 speed aluminum trans.. I'm running the same set up.
Posted via Mobile Device
__________________
Some progress is better then no progress |
![]() |
![]() |
![]() |
#316 |
Registered User
Join Date: Jun 2011
Location: Monroe, WI
Posts: 1,415
|
Re: Post Your Straight Six Pics!
How have I missed this!
__________________
Adam My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706 |
![]() |
![]() |
![]() |
#317 |
Registered User
Join Date: Feb 2010
Location: Minot, ND
Posts: 8
|
Re: Post Your Straight Six Pics!
Bigger pic
|
![]() |
![]() |
![]() |
#318 |
Six in a row makes it go...
![]() Join Date: Mar 2009
Location: Vacationland: Maine
Posts: 1,346
|
Re: Post Your Straight Six Pics!
Sweet. Are those Sanderson headers? Are you gonna run duals all the way back or "Y" it together?
__________________
67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce |
![]() |
![]() |
![]() |
#319 |
Registered User
Join Date: Feb 2010
Location: Minot, ND
Posts: 8
|
Re: Post Your Straight Six Pics!
|
![]() |
![]() |
![]() |
#320 |
Registered User
Join Date: Jun 2011
Location: Monroe, WI
Posts: 1,415
|
Re: Post Your Straight Six Pics!
Might as well throw up mine...
![]()
__________________
Adam My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706 |
![]() |
![]() |
![]() |
#321 |
Registered User
Join Date: Jul 2010
Location: Hemet,Ca
Posts: 1,502
|
Re: Post Your Straight Six Pics!
This post is the reason why I am not completing my sbc350. Gonna sell it and buy me a INLINE 6.
|
![]() |
![]() |
![]() |
#322 |
Registered User
Join Date: Feb 2012
Location: So. Cali.
Posts: 2,642
|
![]()
DRAT !
I just tried to download some pix and my ipod thingie died.... I'll give it a go to - morrow , I even got some nice pix of my folding back bench seat with pockets.... I've been a 6 Banger lover since long before these trucks were made , L6's just keep on going , and going , and going.......... No V-ate ever made has the longevity of an InLiner .
__________________
-Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH ![]() |
![]() |
![]() |
![]() |
#323 |
Registered User
Join Date: Mar 2012
Location: Hialeah
Posts: 6
|
Re: Post Your Straight Six Pics!
Finally got the 292 running, excellent power!
Yes, I know it's not a truck but it is a truck engine! |
![]() |
![]() |
![]() |
#324 |
Senior Member
![]() Join Date: Nov 2010
Location: Reseda CA
Posts: 1,273
|
Re: Post Your Straight Six Pics!
__________________
Some progress is better then no progress |
![]() |
![]() |
![]() |
#325 |
Registered User
Join Date: Jul 2010
Location: Hemet,Ca
Posts: 1,502
|
Re: Post Your Straight Six Pics!
Hi fellas? There is a inline that I am very interested in buying. I talked on the phone with the owner he is a guy on a hot rod site I go to alot. He said that he pulled it out of an old timers 65 chevy pickup. The guy thinks its a 292 but his friends say it looks like a 250. If I am correct on my research it said that the 65 chevy pickups had 230? if this is the case will the 230 still work great in my 67 chevy truck on highways because this is gonna be my DD. here is a picture of it sorry not very good. I am waiting to see if he can verify the casting numbers. I really want a Straight 6.
Last edited by 50bomb; 04-22-2012 at 10:58 AM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|