TX WTB swb driveshaft 54" long - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 04-24-2012, 01:37 PM

I am looking for a one piece driveshaft for my 70 swb truck that I swapped a 700r4 into. In the past, I have found that the later model one piece drivshafts will fit. I am not sure if it has to be out of a truck originally equipped with a 700r4 or not, but it does need to be 54" long.

Mr.C · 04-24-2012, 06:27 PM

I have a 2 pc I won't be using...
Posted via Mobile Device

**Downtown** · 04-25-2012, 07:21 AM

Several years ago when I did mine, I used one out of 1982-89 chevy caprice.
I just just changed the rear universal. Hope this helps.

Mark

**WIDESIDE72** · 05-03-2012, 10:45 PM

Ttt

Del72Chevy · 05-04-2012, 12:45 AM

I did the same thing you are doing now with the 700r4 and the funny thing is I am going to have to go to a two piece since I ordered a porterbuilt dropmember kit but I guess that is a good problem to have. As a side note no regrets at all installing the 700r4 except the shop that did the swap backed my truck into a tool box.

asolde · 05-04-2012, 07:29 AM

C10 Pickup Driveshaft - $40 (Porter)

--------------------------------------------------------------------------------
Date: 2012-04-29, 6:48PM CDT
Reply to: dszx4-2945462122@sale.craigslist.org [Errors when replying to ads?]
--------------------------------------------------------------------------------

Driveshaft from my 69 C10 short wheelbase with a TH350 and 12 bolt rear. Driveshaft is 55" long u joint to u joint. Its a 3" steel driveshaft, 1310 style u joints and a 27 spline yoke. In average condition, was too short for my engine/trans swap. $40 obo

Pmarti69 · 05-04-2012, 11:39 AM

I am swapping out my 700r4 out for TH400 and have the driveshaft on the truck that I planned on taking off this weekend. I will measure and post a pic, this afternoon.

**WIDESIDE72** · 05-04-2012, 03:52 PM

asolde, sounds ok, but I already made palns w/ pmarti to buy the radiator from him, so I am going to see if I can work something out with him on the ds as well. If that doesnt work out, I willl let you know ASAP. Your price is definitely fair!

asolde · 05-04-2012, 04:10 PM

Quote:

Originally Posted by WIDESIDE72

asolde, sounds ok, but I already made palns w/ pmarti to buy the radiator from him, so I am going to see if I can work something out with him on the ds as well. If that doesnt work out, I willl let you know ASAP. Your price is definitely fair!

That's ok I found that add in craigslist and posted it up for you.

**LEEVON** · 05-04-2012, 05:52 PM

I'm fairly certain that 88-98 swb 2wd shafts are very close to this...

Pmarti69 · 05-04-2012, 08:23 PM

Quote:

Originally Posted by WIDESIDE72

asolde, sounds ok, but I already made palns w/ pmarti to buy the radiator from him, so I am going to see if I can work something out with him on the ds as well. If that doesnt work out, I willl let you know ASAP. Your price is definitely fair!

Here are some pictures for you. let me know what you think. I can bring it with me tomorrow if interested.

**WIDESIDE72** · 05-05-2012, 11:48 PM

ds purchased from pmarti. Thanks Paul!

HotRod C/10 · 05-05-2012, 11:53 PM

Let us know how this workes out for fit........I am doing the same combo.

**WIDESIDE72** · 05-06-2012, 07:30 AM

Quote:

Originally Posted by DSALRAM

Let us know how this workes out for fit........I am doing the same combo.

It may be a while before I get this one in, but it came out of Pmarti's truck, swb 71/72 GMC with a 700r4. I already have one in my dad's 72 Chevy swb step w/ 700r4 that came out of an 85 swb step... "Like a glove"...

**WIDESIDE72** · 05-06-2012, 07:33 AM

Ace Ventura - "Like a glove" Scene ...

**WIDESIDE72** · 05-06-2012, 07:34 AM

This is usually how I work on 67-72's

Bluto's Advice - YouTube

So the ease of the DS install was a shock!

Pmarti69 · 05-06-2012, 10:18 AM

Quote:

Originally Posted by WIDESIDE72

ds purchased from pmarti. Thanks Paul!

No Prob, anytime

**WIDESIDE72** · 10-07-2012, 10:59 AM

I am in the market for another one of these if anyone has one in their "pile".
Posted via Mobile Device

*mrdana60* · 10-07-2012, 11:21 AM

I got one 55 center to center of u joint.will that work?

**WIDESIDE72** · 10-08-2012, 01:14 AM

Quote:

Originally Posted by mrdana60

I got one 55 center to center of u joint.will that work?

That would work. How much for it shipped to Leander Tx 78741?
Posted via Mobile Device

*mrdana60* · 10-08-2012, 09:10 AM

50 plus shipping?

**WIDESIDE72** · 10-08-2012, 04:21 PM

Quote:

Originally Posted by mrdana60

50 plus shipping?

Nothing wrong with the price, but I would like to give it a little time to see if I can find something local to save on shipping.

*mrdana60* · 10-08-2012, 04:54 PM

Could do 80 shipped?

04-24-2012, 01:37 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	WTB swb driveshaft 54" long I am looking for a one piece driveshaft for my 70 swb truck that I swapped a 700r4 into. In the past, I have found that the later model one piece drivshafts will fit. I am not sure if it has to be out of a truck originally equipped with a 700r4 or not, but it does need to be 54" long.

04-24-2012, 06:27 PM	#2
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: WTB swb driveshaft 54" long I have a 2 pc I won't be using... Posted via Mobile Device __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

04-25-2012, 07:21 AM	#3
Downtown Senior Member Join Date: Dec 1999 Location: New Palestine, IN Posts: 471	Re: WTB swb driveshaft 54" long Several years ago when I did mine, I used one out of 1982-89 chevy caprice. I just just changed the rear universal. Hope this helps. Mark __________________ 72 Super Cheyenne Longbed 350 49,000 original miles and My dad ordered it new 66 Chevy Caprice 2 dr 77 Caprice Estate Wagon New Palestine, IN

05-03-2012, 10:45 PM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB swb driveshaft 54" long Ttt

05-04-2012, 12:45 AM	#5
Del72Chevy Registered User Join Date: Jun 2009 Location: Claymont DE Posts: 225	Re: WTB swb driveshaft 54" long I did the same thing you are doing now with the 700r4 and the funny thing is I am going to have to go to a two piece since I ordered a porterbuilt dropmember kit but I guess that is a good problem to have. As a side note no regrets at all installing the 700r4 except the shop that did the swap backed my truck into a tool box.

05-04-2012, 07:29 AM	#6
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: WTB swb driveshaft 54" long C10 Pickup Driveshaft - $40 (Porter) -------------------------------------------------------------------------------- Date: 2012-04-29, 6:48PM CDT Reply to: dszx4-2945462122@sale.craigslist.org [Errors when replying to ads?] -------------------------------------------------------------------------------- Driveshaft from my 69 C10 short wheelbase with a TH350 and 12 bolt rear. Driveshaft is 55" long u joint to u joint. Its a 3" steel driveshaft, 1310 style u joints and a 27 spline yoke. In average condition, was too short for my engine/trans swap. $40 obo

05-04-2012, 11:39 AM	#7
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: WTB swb driveshaft 54" long I am swapping out my 700r4 out for TH400 and have the driveshaft on the truck that I planned on taking off this weekend. I will measure and post a pic, this afternoon. __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

05-04-2012, 03:52 PM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB swb driveshaft 54" long asolde, sounds ok, but I already made palns w/ pmarti to buy the radiator from him, so I am going to see if I can work something out with him on the ds as well. If that doesnt work out, I willl let you know ASAP. Your price is definitely fair!

05-04-2012, 05:52 PM	#10
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: WTB swb driveshaft 54" long I'm fairly certain that 88-98 swb 2wd shafts are very close to this... __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

05-05-2012, 11:48 PM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB swb driveshaft 54" long ds purchased from pmarti. Thanks Paul!

05-05-2012, 11:53 PM	#13
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB swb driveshaft 54" long Let us know how this workes out for fit........I am doing the same combo. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

10-07-2012, 10:59 AM	#18
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB swb driveshaft 54" long I am in the market for another one of these if anyone has one in their "pile". Posted via Mobile Device

10-07-2012, 11:21 AM	#19
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: WTB swb driveshaft 54" long I got one 55 center to center of u joint.will that work?

10-08-2012, 09:10 AM	#21
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: WTB swb driveshaft 54" long 50 plus shipping?

10-08-2012, 04:54 PM	#23
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: WTB swb driveshaft 54" long Could do 80 shipped?



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.