05-19-2012, 05:42 PM | #1 |
Registered User
Join Date: Mar 2012
Location: San Antonio, Tx
Posts: 784
|
Need yall's advice
Im looking at switching out all the bushings on my truck
74 chevy shortbed 350 vin V I noticed that I need to replace my control arm bushings upper and lower Ive looked online to see if i could maybe just replace the bushings in the control arms but everything i keep finding says to: burn out the rubbers with a torch Take out the sleeve with a air chisel and with a press put them back on problem is i dont have any of those tools so i was thinking just replace the whole control arm Ill get the new control arm, bushings, rods, bump stop, ball joint What do yall think about that? I went online to advanced and autozone and they were saying saying 130 for each upper control arm i was like 275 thats alright i guess But upon looking online i found them for 70 bucks shipped? what do yall think buy them from online? links http://www.drivewire.com/search/?N=0...universal:0%29 http://www.racepages.com/parts/control_arm/c10.html any advice guys |
05-19-2012, 06:02 PM | #2 |
Robert Olson Transport
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Need yall's advice
make sure that online or anywhere you are getting a quality product. there are alot of asian models out there that are real junky.
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
05-19-2012, 06:13 PM | #3 |
Registered User
Join Date: Mar 2012
Location: San Antonio, Tx
Posts: 784
|
Re: Need yall's advice
Yea im going to do my research first and get me some good ones
do you think that would be my best route just buy the new control arm with everything on it already? jus wanted to ask some people with more experience then me |
05-19-2012, 06:17 PM | #4 |
Robert Olson Transport
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Need yall's advice
on my 1982 i wanted to do that but twice they shipped me Dorman products for a c20 instead of a C10 so i just used my old ones over.. i was gonna change them out... eventually i will buy new ones
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
05-19-2012, 06:20 PM | #5 |
Registered User
Join Date: Mar 2012
Location: San Antonio, Tx
Posts: 784
|
Re: Need yall's advice
How did you change your bushings Then?
or are the the original bushings from 82? |
05-19-2012, 06:40 PM | #6 |
Robert Olson Transport
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Need yall's advice
I had a buddy who has a press six pack of bud brought everything over one night and just swapped it out and had a couple of beers next day installed the new control arms on the truck
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
05-19-2012, 06:45 PM | #7 |
Newbee
Join Date: Jan 2010
Location: Phoenix, Arizona
Posts: 1,406
|
Re: Need yall's advice
Rock auto has quite the selection of control arms,
http://www.rockauto.com/catalog/raframecatalog.php But for that kind of money, you could buy some tools. You could also buy the bushings, and have a machine shop replace them. Just giving some options. |
05-19-2012, 06:50 PM | #8 |
Registered User
Join Date: Jan 2011
Location: Tulsa,Okla
Posts: 590
|
Re: Need yall's advice
Most alignment shops will press out the old bushings and press the new ones in for you. A local shop did mine for $20 an arm, so $80. After ball joints, bushings, a tie rod end, I had about $200 in my whole rebuild.
__________________
"Whoever said money can't buy happiness has obviously never seen a speed shop! |
05-19-2012, 07:09 PM | #9 |
Registered User
Join Date: Mar 2012
Location: San Antonio, Tx
Posts: 784
|
Re: Need yall's advice
theirs really no machine shops close too me, i will call a few aliment shops tomorrow then
i was thinking of just buying these because I also need the ball joints but if i can get them pressed in for cheap along with the ball joints ill just take it too a shop |
05-19-2012, 07:17 PM | #10 |
Registered User
Join Date: May 2012
Location: Visalia CA
Posts: 118
|
Re: Need yall's advice
I just did mine, energy susp poly reds, 80 shipped from summit. LOcal shop charged 100 to press all bushings and ball joints.
Beware the risk of poly bushings!!! I love minefrom a performance view, my girfriends breasts hate them Posted via Mobile Device |
05-19-2012, 07:19 PM | #11 |
Registered User
Join Date: May 2012
Location: Visalia CA
Posts: 118
|
Re: Need yall's advice
Polly everywhere Posted via Mobile Device |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|