The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-12-2012, 12:52 PM   #1
blfuller123
Registered User
 
blfuller123's Avatar
 
Join Date: Jul 2011
Location: Lake Jackson, TX
Posts: 486
Parting out 67 SWB project For Sale or Trade

I got a suburban that I am working on so I am parting out my project truck. All pieces are for trade or OBO. No shipping.

67 front clip $425 includes, fenders, grill, hood and core support




68 GMC cab and doors with title $250-cab has rust in the usual places needs one cab corner, no glass





Bare SWB chassis with notchs $350
Chassis was stripped and painted satin black. Has a Porterbuilt modular notch welded in the rear which means any Porterbuilt bridge can bolt to it. Also has the front notch for the rack and pinion steering. (Picture was taken before the notch was painted. Bridge and crossmember in the picture not included)



67 Bed $1200- The bed sides are new, the front bed panel is new, the stake pockets are welded, the tailgate is welded and smooth, the tailgate handle is welded and the roll pan is welded. I have a floor that is cut to accommodate the suspension, I have a pair of inner fenders going with it.









59 Impala Dash $225 As you see it in the pictures










Prices are listed or $2000 cash if you want it all. I am looking for a small block chevy engine, 700R4 transmission, air management or ??? Best way to get a hold of me is email atsfuller@yahoo.com




blfuller123 is offline   Reply With Quote
Old 06-12-2012, 07:18 PM   #2
vman1213
Registered User
 
vman1213's Avatar
 
Join Date: May 2010
Location: Sanger CA
Posts: 84
Re: Parting out 67 SWB project For Sale or Trade

Do You have The Ignition Switch Bezel Its 67 only Im Looking For One
vman1213 is offline   Reply With Quote
Old 06-12-2012, 10:58 PM   #3
68GMCCustom
Truck and auto performance nut
 
68GMCCustom's Avatar
 
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
Re: Parting out 67 SWB project For Sale or Trade

How about a trade? My 200-4r w/aftermarket parts plus $500 for the bed?

__________________
Kurt -

'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...

my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
68GMCCustom is offline   Reply With Quote
Old 06-13-2012, 06:24 AM   #4
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: Parting out 67 SWB project For Sale or Trade

I wish I was closer.$2,000 for all is not bad at all!

Quote:
Originally Posted by vman1213 View Post
Do You have The Ignition Switch Bezel Its 67 only Im Looking For One
This one has a '68 cab,so...
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 06-13-2012, 07:27 AM   #5
blfuller123
Registered User
 
blfuller123's Avatar
 
Join Date: Jul 2011
Location: Lake Jackson, TX
Posts: 486
Re: Parting out 67 SWB project For Sale or Trade

Quote:
Originally Posted by vman1213 View Post
Do You have The Ignition Switch Bezel Its 67 only Im Looking For One
No I do not.

Quote:
Originally Posted by 68GMCCustom View Post
How about a trade? My 200-4r w/aftermarket parts plus $500 for the bed?




Sent you a PM



Quote:
Originally Posted by special-K View Post
I wish I was closer.$2,000 for all is not bad at all!



This one has a '68 cab,so...
Its not that far.....
blfuller123 is offline   Reply With Quote
Old 06-13-2012, 12:28 PM   #6
blfuller123
Registered User
 
blfuller123's Avatar
 
Join Date: Jul 2011
Location: Lake Jackson, TX
Posts: 486
Re: Parting out 67 SWB project For Sale or Trade

Im also looking for 20 or 22 inch rims.
blfuller123 is offline   Reply With Quote
Old 06-13-2012, 12:30 PM   #7
El Campo
Registered User
 
El Campo's Avatar
 
Join Date: Jul 2011
Location: El Campo, Tx
Posts: 1,246
Re: Parting out 67 SWB project For Sale or Trade

How is the roof on the cab? Any holes or dents?
__________________
72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles
72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2)
2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end
2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED)
2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one)
Hook em Horns!!!
El Campo is offline   Reply With Quote
Old 06-13-2012, 02:23 PM   #8
blfuller123
Registered User
 
blfuller123's Avatar
 
Join Date: Jul 2011
Location: Lake Jackson, TX
Posts: 486
Re: Parting out 67 SWB project For Sale or Trade

Quote:
Originally Posted by El Campo View Post
How is the roof on the cab? Any holes or dents?
There is a dent in the roof. I think it could be pulled out. Ill have to get some pictures later.
blfuller123 is offline   Reply With Quote
Old 06-13-2012, 02:27 PM   #9
Bennett68C10
Registered User
 
Bennett68C10's Avatar
 
Join Date: Dec 2006
Location: Toms River, NJ
Posts: 5,518
Re: Parting out 67 SWB project For Sale or Trade

This is a good deal, If I lived in Texas I would have bought it in a heartbeat. Too bad I live so far away. Good luck with the sale.
__________________
Keith

66 Suburban

Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361

IG: bennett68c10
Bennett68C10 is offline   Reply With Quote
Old 06-14-2012, 08:24 AM   #10
blfuller123
Registered User
 
blfuller123's Avatar
 
Join Date: Jul 2011
Location: Lake Jackson, TX
Posts: 486
Re: Parting out 67 SWB project For Sale or Trade

Sale pending on the bed.
blfuller123 is offline   Reply With Quote
Old 06-14-2012, 06:54 PM   #11
72Blazing
Registered User
 
72Blazing's Avatar
 
Join Date: Jan 2012
Location: McAllen, Texas
Posts: 396
Re: Parting out 67 SWB project For Sale or Trade

I will be in Dallas this weekend. Can I come by and see the front clip? I will bring cash and a trailer.
Thanks,
Chris
Posted via Mobile Device
72Blazing is offline   Reply With Quote
Old 06-14-2012, 10:57 PM   #12
blfuller123
Registered User
 
blfuller123's Avatar
 
Join Date: Jul 2011
Location: Lake Jackson, TX
Posts: 486
Re: Parting out 67 SWB project For Sale or Trade

The clip is pending.

Cab, chassis and dash are still available.
blfuller123 is offline   Reply With Quote
Old 06-14-2012, 11:08 PM   #13
72Blazing
Registered User
 
72Blazing's Avatar
 
Join Date: Jan 2012
Location: McAllen, Texas
Posts: 396
Re: Parting out 67 SWB project For Sale or Trade

So does that mean you sold it?
Posted via Mobile Device
72Blazing is offline   Reply With Quote
Old 06-15-2012, 07:27 AM   #14
blfuller123
Registered User
 
blfuller123's Avatar
 
Join Date: Jul 2011
Location: Lake Jackson, TX
Posts: 486
Re: Parting out 67 SWB project For Sale or Trade

It means I still have it in my posession, just waiting for the trade to happen and picked up.
blfuller123 is offline   Reply With Quote
Old 06-15-2012, 09:42 AM   #15
72Blazing
Registered User
 
72Blazing's Avatar
 
Join Date: Jan 2012
Location: McAllen, Texas
Posts: 396
Re: Parting out 67 SWB project For Sale or Trade

It clearly means another sale or trade took place through PMs leaving anybody else interested in your items in the dark on the status of your items. Might want to read the rules for sales in the classified section. JMHO
Posted via Mobile Device
72Blazing is offline   Reply With Quote
Old 06-15-2012, 12:45 PM   #16
68GMCCustom
Truck and auto performance nut
 
68GMCCustom's Avatar
 
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
Re: Parting out 67 SWB project For Sale or Trade

ever consider your post happened during or just after a negotiation took place with another member? and before he had a chance to post an update here?
your posts were within hours of each other....how soon or long should it take someone to post updates?
__________________
Kurt -

'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...

my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
68GMCCustom is offline   Reply With Quote
Old 06-15-2012, 02:09 PM   #17
72Blazing
Registered User
 
72Blazing's Avatar
 
Join Date: Jan 2012
Location: McAllen, Texas
Posts: 396
Re: Parting out 67 SWB project For Sale or Trade

Buyer Seller code of conduct:

II. Make initial contact with the seller in the thread. Failure to make initial contact for parts you are interested in via the thread will result in account restrictions.
Posted via Mobile Device
72Blazing is offline   Reply With Quote
Old 06-15-2012, 03:29 PM   #18
68GMCCustom
Truck and auto performance nut
 
68GMCCustom's Avatar
 
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
Re: Parting out 67 SWB project For Sale or Trade

Now how can you say for certain that the person he's working with on the parts listed as "sale pending" did not make initial contact with him in this thread? Half a dozen people have posts in this thread....and you certainly weren't the first of them, you were the last. And when you're getting the full skinny on something and ready to order....do you sometimes add or subtract items from your order? Like...."ohhh"..."I'll take that too then"! I do.

I fail to see where anyone one has been hurt here. Seems to me you're just a bit miffed over missing something you were interested in and trying to cause trouble for the seller. IMHO Brett did nothing wrong.
__________________
Kurt -

'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...

my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
68GMCCustom is offline   Reply With Quote
Old 06-15-2012, 05:03 PM   #19
72Blazing
Registered User
 
72Blazing's Avatar
 
Join Date: Jan 2012
Location: McAllen, Texas
Posts: 396
Re: Parting out 67 SWB project For Sale or Trade

I am not saying Brett did anything wrong. I am clearly stating that in none of the previous post did anyone post that they had any interest in the front clip. So I posted that I was interested in the front clip via the thread. Yes I am a little miffed if that is what you want to call it, but that is the way it goes sometimes when you play by the rules.

Thanks for letting me know how this deal went down. Nice clip you got yourself!
The End
Posted via Mobile Device
72Blazing is offline   Reply With Quote
Old 06-15-2012, 06:54 PM   #20
68GMCCustom
Truck and auto performance nut
 
68GMCCustom's Avatar
 
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
Re: Parting out 67 SWB project For Sale or Trade

Quote:
Originally Posted by 72Blazing View Post
but that is the way it goes sometimes when you play by the rules.

Thanks for letting me know how this deal went down. Nice clip you got yourself!
The End
Posted via Mobile Device
I hope you're not insinuating that anyone in this thread isn't "playing by the rules". People mention an interest and PM for details...that's kind of how it works around here. You just made a post before the seller had a chance to make an update post (later the same day)...it happens.
If several days had gone by in between the sellers posts I could understand your issue....this thread is only 3 days old and the seller has responded more then once each day....

As far as "letting you know how it went down"....I'm not saying that's how it went down. Reality is you'd need to ask the seller about that....I was just giving you possible scenarios. You're assuming again.

and if you're saying I got the clip....you're making more assumptions again.

Hey folks it's Friday evening.....time to relax and let the trouble's of the week go!!! Have a beer...cheers!
__________________
Kurt -

'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...

my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
68GMCCustom is offline   Reply With Quote
Old 06-18-2012, 07:15 AM   #21
Titus0
Registered User
 
Titus0's Avatar
 
Join Date: May 2010
Location: hope, arkansas
Posts: 37
Re: Parting out 67 SWB project For Sale or Trade

Interested in the Front Clip if its still availiable. Put me in line if so...

Thanks, Shawn
Titus0 is offline   Reply With Quote
Old 06-18-2012, 11:11 AM   #22
Liz
Catchy title goes here..
 
Liz's Avatar
 
Join Date: Mar 2002
Location: Rockwell, NC
Posts: 39,767
Re: Parting out 67 SWB project For Sale or Trade

Quote:
Originally Posted by 72Blazing View Post
Buyer Seller code of conduct:

II. Make initial contact with the seller in the thread. Failure to make initial contact for parts you are interested in via the thread will result in account restrictions.
Posted via Mobile Device
Guidelines, not set in stone rules.. please leave the moderating to the staff. Simply use the report a post feature if you have a problem or concern.

Thank you
Liz is offline   Reply With Quote
Old 06-23-2012, 11:39 AM   #23
bchaney
Registered User
 
bchaney's Avatar
 
Join Date: Apr 2011
Location: shepherd tx
Posts: 71
Re: Parting out 67 SWB project For Sale or Trade

im interested in the whole truck
bchaney is offline   Reply With Quote
Old 06-25-2012, 03:36 PM   #24
Boogie_Man
Registered User
 
Boogie_Man's Avatar
 
Join Date: Jan 2012
Location: Texas City, TX
Posts: 115
Re: Parting out 67 SWB project For Sale or Trade

I'll get in line for the front clip too. That'd make a nice day trip.
__________________
'71 Short Stepper - One piece at a time!
Boogie_Man is offline   Reply With Quote
Old 06-26-2012, 07:41 PM   #25
68GMCCustom
Truck and auto performance nut
 
68GMCCustom's Avatar
 
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
Re: Parting out 67 SWB project For Sale or Trade

Supposedly the whole truck was sold to a family member.
Posted via Mobile Device
__________________
Kurt -

'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...

my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
68GMCCustom is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com