|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-01-2003, 12:25 AM
|
#1 |
|
Registered User
Join Date: Jul 2003
Location: So. Cal.
Posts: 389
|
What 5 lug axles will fit my 68 SWB?
Does anybody know if I can swap in 5 lug axles out of later trucks? Mine is a 1/2 ton, short bed, 2WD with coil springs.
Thanks
__________________
1968 Chev SWB with 1998 Corvette LS1 305hp and 320 ftlb to the wheels (stock engine!) AEM EMS and wideband O2 sensors Bowtie Overdrive's 700R4, stage 3 Baer 4 wheel discs and 20s http://iciclelanding.com/aperture?album=2049&view=album |
|
|
|
10-01-2003, 12:39 AM
|
#2 |
|
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
The axles on '67-70 trucks are a differnt lenght than on later trucks....it would proably be easiest to swap in a complete rear axle out of a '71-'72 truck.
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg |
|
|
|
|
10-01-2003, 12:53 AM
|
#3 |
|
Registered User
Join Date: Jul 2003
Location: So. Cal.
Posts: 389
|
that sux. I guess I'll have to buy some conversion axles.
__________________
1968 Chev SWB with 1998 Corvette LS1 305hp and 320 ftlb to the wheels (stock engine!) AEM EMS and wideband O2 sensors Bowtie Overdrive's 700R4, stage 3 Baer 4 wheel discs and 20s http://iciclelanding.com/aperture?album=2049&view=album |
|
|
|
|
10-01-2003, 08:18 AM
|
#4 |
|
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,449
|
I just did
this swap I made some spacer plates to go between the backing plate and rear end housing they were 3/4 " thick for each side.They line out perfect now and a hell of alot cheaper than new axles I was told the drums off a 73 heavy half ton would work as they were wider never tried it though
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
|
|
|
|
10-02-2003, 12:16 AM
|
#5 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
3/4 each side? I thought it was 3/4 TOTAL, putting a 3/8 inch spacer on each side?
|
|
|
|
|
10-02-2003, 04:21 PM
|
#6 |
|
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,449
|
ttt Nope I got 3/4" on each side
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
|
|
|
|
10-02-2003, 05:34 PM
|
#7 |
|
Account Suspended
Join Date: Jul 2003
Posts: 1,284
|
I use factory 6 lug axles that we send to a machine shop and have them redrilled (and one hole filled) as a 5 lug pattern, it is cheaper and alot easier since there are a lot of six lug axles around.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
