TX Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 06-28-2012, 11:06 PM

I pulled these out of a 71 C10 truck I parted and decided not to use them after all. The retractor boot is split on the passenger side. There is a scrape on the driver side boot, but it is not split. There is primer overspray on both retractor boots. Both retractors work as intended. The webbing on all belts is in good condition. I have not cleaned them any, but would assume they would come out pretty nice with some woolite. One of the "GM" stickers is peeling on one buckle. The other two stickers are fine. The plastic on the buckles is in good condition with no cracks. The center male belt tab has some rust from being under the seat for years. There is no substantial rust on the other buckles or tabs. I planned to find another set and make one really nice set using these as "donors", but decided to build a red truck with black belts. $40 shipped to lower 48

**WIDESIDE72** · 06-29-2012, 08:01 AM

The photos show the worst of the belts, btw. Also, these are dark green in case you didn't see it in the title.

Posted via Mobile Device
Posted via Mobile Device

**DeadheadNM** · 06-29-2012, 08:04 AM

Sport/Truck may be interested in these for the center belt as he is looking for one. I just sent him a PM.

Sport/Truck · 06-30-2012, 09:10 AM

Thanks for the heads up Pete!
As mentioned I'm mainly interested in the center, you willing to separate them to keep shipping down?
Can you post some good pictures of the center?
Shipping to 87047.

Sport/Truck · 06-30-2012, 09:24 AM

What does one do for bolts? Are the bolts for the center the same as the ones used on driver / passenger side anchors?

**DeadheadNM** · 06-30-2012, 09:31 AM

Hey! If I remember correctly the center shares bolts with the others....

Quote:

Originally Posted by Sport/Truck

What does one do for bolts? Are the bolts for the center the same as the ones used on driver / passenger side anchors?

Sport/Truck · 06-30-2012, 09:56 AM

That would make sense, but I read something that suggested they use separate bolts?

**DeadheadNM** · 06-30-2012, 10:13 AM

When I replaced the non-OEM belts in my K10 I believe I just doubled up with whatever OEM bolts I scrounged from U-Pull It. Not sure if thats correct but here's a pic from my K20 that shows how GM did it....

Quote:

Originally Posted by Sport/Truck

That would make sense, but I read something that suggested they use separate bolts?

**southern parts** · 06-30-2012, 06:22 PM

if you cant work something out with sport/truck, i`ll take them.

**WIDESIDE72** · 07-01-2012, 12:02 AM

more detailed photo of center belt. I will not be splitting these up. As mentione above, $40 shipped to lower 48 states

Sport/Truck · 07-01-2012, 09:34 AM

I'll take 'em can you send me your pay-pal info.

s/t

**DeadheadNM** · 07-01-2012, 12:53 PM

Quote:

Originally Posted by Sport/Truck

I'll take 'em can you send me your pay-pal info.

s/t

If you don't want the outer buckles I'll take them and share the cost with you. I'm hoping to build a set of shoulder belts. Pete

Sport/Truck · 07-01-2012, 08:40 PM

You got! Can you PM me your info? I should see these by next weekend...
s/t

**WIDESIDE72** · 07-02-2012, 06:29 PM

Sold and shipped to sport/truck
Posted via Mobile Device

06-28-2012, 11:06 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality I pulled these out of a 71 C10 truck I parted and decided not to use them after all. The retractor boot is split on the passenger side. There is a scrape on the driver side boot, but it is not split. There is primer overspray on both retractor boots. Both retractors work as intended. The webbing on all belts is in good condition. I have not cleaned them any, but would assume they would come out pretty nice with some woolite. One of the "GM" stickers is peeling on one buckle. The other two stickers are fine. The plastic on the buckles is in good condition with no cracks. The center male belt tab has some rust from being under the seat for years. There is no substantial rust on the other buckles or tabs. I planned to find another set and make one really nice set using these as "donors", but decided to build a red truck with black belts. $40 shipped to lower 48 Attached Images

06-29-2012, 08:01 AM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality The photos show the worst of the belts, btw. Also, these are dark green in case you didn't see it in the title. Posted via Mobile Device Posted via Mobile Device

06-29-2012, 08:04 AM	#3
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,423	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality Sport/Truck may be interested in these for the center belt as he is looking for one. I just sent him a PM. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-30-2012, 09:10 AM	#4
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality Thanks for the heads up Pete! As mentioned I'm mainly interested in the center, you willing to separate them to keep shipping down? Can you post some good pictures of the center? Shipping to 87047. __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe. Last edited by Sport/Truck; 06-30-2012 at 09:19 AM. Reason: Clarification

06-30-2012, 09:24 AM	#5
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality What does one do for bolts? Are the bolts for the center the same as the ones used on driver / passenger side anchors? __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

06-30-2012, 09:56 AM	#7
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality That would make sense, but I read something that suggested they use separate bolts? __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

06-30-2012, 06:22 PM	#9
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality if you cant work something out with sport/truck, i`ll take them.

07-01-2012, 12:02 AM	#10
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality more detailed photo of center belt. I will not be splitting these up. As mentione above, $40 shipped to lower 48 states Attached Images

07-01-2012, 09:34 AM	#11
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality I'll take 'em can you send me your pay-pal info. s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

07-01-2012, 08:40 PM	#13
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality You got! Can you PM me your info? I should see these by next weekend... s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

07-02-2012, 06:29 PM	#14
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Dark green 1971 Dark Green Lap Belts 6 pieces Decent Driver Quality Sold and shipped to sport/truck Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.