Installation of Shoulder belts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JoetheMobster · 10-04-2003, 02:57 PM

I was reading a couple of posts here about the installation of shoulder belts in the 67-72's and had a question.

Where the shoulder belt would be installed on my truck, there are metal caps over what I would imagine are bolt holes. How in the world do the shoulder belts hook up here?

One of the reasons my wife hates the truck is because there are ONLY lap belts in the truck. I saw others posting about using belts out of S10's so I figured hey - why not.

lukecp · 10-04-2003, 03:14 PM

Pry off the caps, and there is a nice pre-threaded hole beneath them

jef5150 · 10-04-2003, 03:44 PM

heres a link for install,theres some pics,,,,its pretty easy....jeff http://www.julianos.com/how2_67chevy_truck.html

JoetheMobster · 10-04-2003, 04:49 PM

Thanks for the info guys!!

Jef5150 - that site rocks! Thanks for passing along the link!

70c10 · 10-04-2003, 07:08 PM

These might work! http://cgi.ebay.com/ebaymotors/ws/eB...tem=2435387814

70c10 · 10-04-2003, 07:08 PM

or these! http://cgi.ebay.com/ebaymotors/ws/eB...tem=2435395597

RON WOODGEARD · 10-04-2003, 08:21 PM

If you don't have any yet, Check the link here for **************** members page, He lowered the price and posted them on the members page,, Just for me !!!

Now Ya just CAN'T beat that.

Ron

*60apache4* · 10-04-2003, 10:05 PM

You also might try the shoulder harness belts out of a 73-79 chev truck. I installed a set, I think they are out of a 76 truck, and they bolt right in. The mounting bracket is slightly different but it works great - you can use the stock mounting holes in the floor and just remove the plug on the cab pillar to reveal the weldnut.

JoetheMobster · 10-04-2003, 11:20 PM

Quote:

You also might try the shoulder harness belts out of a 73-79 chev truck

You read my mind!!! I was going to ask if there was a specific (year) S10 or other vehicle I should be looking for.

I will definitely keep that in mind!

lukecp · 10-04-2003, 11:37 PM

I have noticed that the 73 up fullsize belts would proably work too, and some members have also used them...

Get the belts out of an old-style (82-93) S10 if that is what you decide to do. I think the belts are different on standard and extended cabs, but i'm not sure. Mine came out of an '86 or so S15 GMC standard cab and went in great besides the drilling of one hole.

10-04-2003, 02:57 PM	#1
JoetheMobster Listening since '86 Join Date: Sep 2001 Location: Canada Posts: 1,799	Installation of Shoulder belts I was reading a couple of posts here about the installation of shoulder belts in the 67-72's and had a question. Where the shoulder belt would be installed on my truck, there are metal caps over what I would imagine are bolt holes. How in the world do the shoulder belts hook up here? One of the reasons my wife hates the truck is because there are ONLY lap belts in the truck. I saw others posting about using belts out of S10's so I figured hey - why not. __________________ 2007 Saturn Aura - hey it WAS a GM product

10-04-2003, 03:14 PM	#2
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Pry off the caps, and there is a nice pre-threaded hole beneath them __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

10-04-2003, 04:49 PM	#4
JoetheMobster Listening since '86 Join Date: Sep 2001 Location: Canada Posts: 1,799	Thanks for the info guys!! Jef5150 - that site rocks! Thanks for passing along the link! __________________ 2007 Saturn Aura - hey it WAS a GM product

10-04-2003, 07:08 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	These might work! http://cgi.ebay.com/ebaymotors/ws/eB...tem=2435387814 __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-04-2003, 07:08 PM	#6
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	or these! http://cgi.ebay.com/ebaymotors/ws/eB...tem=2435395597 __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-04-2003, 03:44 PM	#3
jef5150 Inline 69 Join Date: Apr 2003 Location: valleysprings,california Posts: 1,018	heres a link for install,theres some pics,,,,its pretty easy....jeff http://www.julianos.com/how2_67chevy_truck.html

10-04-2003, 08:21 PM	#7
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	If you don't have any yet, Check the link here for **************** members page, He lowered the price and posted them on the members page,, Just for me !!! Now Ya just CAN'T beat that. Ron

10-04-2003, 10:05 PM	#8
60apache4 Account Suspended Join Date: Nov 2001 Location: Oregon Posts: 147	You also might try the shoulder harness belts out of a 73-79 chev truck. I installed a set, I think they are out of a 76 truck, and they bolt right in. The mounting bracket is slightly different but it works great - you can use the stock mounting holes in the floor and just remove the plug on the cab pillar to reveal the weldnut.

10-04-2003, 11:37 PM	#10
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	I have noticed that the 73 up fullsize belts would proably work too, and some members have also used them... Get the belts out of an old-style (82-93) S10 if that is what you decide to do. I think the belts are different on standard and extended cabs, but i'm not sure. Mine came out of an '86 or so S15 GMC standard cab and went in great besides the drilling of one hole. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.