![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2012
Location: acworth
Posts: 3
|
70 c10 lowering
I'm new here so bare with me...I want to lower my 70 c10 2in the front and 3 in the back. What the best most economical way to acheive this? Will I need new shocks? Will this help the ride of my truck? Thanks for any info you can give.
|
![]() |
![]() |
![]() |
#2 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,474
|
Re: 70 c10 lowering
-
Hello & welcome to the board. The words best and economical don't usually work too well together... ![]() LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2012
Location: acworth
Posts: 3
|
Re: 70 c10 lowering
Your right about the "best and economical",doesn't realley go together. I have no problem dropping a few hundred on some springs, but do you know if I will need drop shocks or will the stock ones work and will it throw of any other componants of the drive train? Thanks for the response
Posted via Mobile Device |
![]() |
![]() |
![]() |
#4 |
Florida Edition
![]() ![]() Join Date: Oct 2010
Location: Fruitland Park, FL
Posts: 4,025
|
Re: 70 c10 lowering
If your just going with a 2/4 drop stock shocks should work ok.
Also welcome aboard from Central Florida!
__________________
70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394 |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Jan 2011
Location: Chattanooga TN
Posts: 6,208
|
Re: 70 c10 lowering
Welcome from TN ! You're not too far from me.
Come up and I'll even help you drop it. The best way to do it without impacting your ride would be to go with drop spindles. While yes, cutting one coil will work it will require you to get an alignment, new shocks, and by cutting the coil it will relieve some of the spring tension. = a little more bouncy ride. If you go with spindles, make sure you get them for 63-70 model year so your balljoints will be the same. (might as well replace them while you have it apart) Now's the time to do a disc conversion too, assuming it has drums on it now.
__________________
Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 *Currently underway* 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet *Sold* 1985 Silverado Short Fleet *Sold* 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride) |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|