Jimmy / Blazer measurements needed - Thanks in advance!

[oldtinrods]

I was wondering if anyone could get me a couple of measurements. I have a C10 that I am going to SWB, but I have seen guys over the years that have gone shorter than swb and went with blazer / jimmy measurements. I was wondering if anyone could get me a measurement? If you have the time the measurements needed are below.

I need to know the distance from the back of the door to the end of the bed (measured along the body line).

I also need to know the measurement from the back of the door to the wheel well (also measured along the body line).

Here is a picture if if helps..



Thank you very much!

-Ronnie

[vtblazer]

I don't have the numbers for you but I've done the opposite, I've used short bed bedsides for blazer repairs.

I'll see if I can remember how to post the pics for ya...

The pics merely show how much longer the swb bedsides are, everything else matches up the same.

[47thriftmaster]

I get 76.5" and 22.5" respectively

[oldtinrods]

Thanks guys! I do appreciate it.