|
08-08-2012, 03:21 PM
|
#51 |
|
Registered User
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
I got seven tracking numbers emailed to me from Porterbuilt today. Estimated arrival next Tuesday. Then........It's on!
|
|
|
|
08-13-2012, 04:51 PM
|
#52 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
Did some of the high hump install today. I cut out the old one and have the holes drilled for the mounting bolts. I ordered some 5/16" threaded square nuts to weld on the underside so it will be like a stock install. Once those are in and the bolts tightened, I will spot weld the forward firewall mating section in. I am transferring the gas pedal stud mount over from the low hump as the high hump had 1/4" nuts for the pedal studs and my stock low hump pedal mount studs are 5/16" thread. Pictures below:
stock low hump:  Hole after removal:  High hump in place:  Porterbuilt stuff is scheduled to arrive sometime tommorrow. |
|
|
|
|
08-13-2012, 05:14 PM
|
#53 | |
|
Registered User
Join Date: Jan 2012
Location: Crest Hill, IL
Posts: 337
|
Re: DURG's Black 65 C10
Quote:
DURGS, Very clean truck you started your build with. It's looking good. Have fun with the rest of the build.
__________________
This is my Build A 5.3L 1965 C-10 Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=502100 |
|
|
|
|
|
08-13-2012, 09:36 PM
|
#54 |
|
Registered User
Join Date: Jul 2012
Location: Cen*Cal
Posts: 16
|
Re: DURG's Black 65 C10
Very nice Impala! Are the front wheels smaller than the back with bigger tires?
Solid truck! |
|
|
|
|
08-13-2012, 10:00 PM
|
#55 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
Yeah the Impala has 18" on front and 20" on rear. Truck will have 20" on front and 22" on rear. Same Coy's C-5 Gray wheels. (If they ever ship).
|
|
|
|
|
08-15-2012, 06:46 AM
|
#56 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
Tuesday was a big day. Most of the Porterbuilt parts showed up. Few small items coming next week.
   Look at the amount of work just in the Dropmember itself: 
|
|
|
|
|
08-15-2012, 07:05 AM
|
#57 |
|
Registered User
Join Date: Jan 2011
Location: Saco, Maine
Posts: 377
|
Re: DURG's Black 65 C10
That's awesome! Cant wait to see it all come together.
__________________
65 Chevy short fleet 350 5 speed, soon to be LSX powered 65 F100 short fleet 91 Heritage softail 94 Fatboy 11 Softail Deluxe [wife's bike] 13 Streetglide http://www.youtube.com/watch?v=yMFMw...eature=mh_lolz |
|
|
|
|
08-15-2012, 07:38 AM
|
#58 |
|
Registered User
Join Date: Feb 2011
Location: muskogee, ok
Posts: 1,091
|
Re: DURG's Black 65 C10
xmas in august!!!! bet you were stoked to open all those boxes!!!
__________________
 bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918 |
|
|
|
|
08-15-2012, 06:45 PM
|
#59 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
Still waiting on my rear bushings and heim joints and hardware kits for the rear stuff. I took my boy fishing today so will probably actually start putting some stuff together Thursday. Quality looks really nice.
|
|
|
|
|
08-15-2012, 06:59 PM
|
#60 |
|
Registered User
Join Date: Jul 2012
Location: Cen*Cal
Posts: 16
|
Re: DURG's Black 65 C10
definitly makes me want a PorterBuilt C-10!
|
|
|
|
|
08-16-2012, 09:55 PM
|
#61 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
I got started on the Porterbuilt install last night and today. Bunch of pictures, It is the Touring coilover version with four link and the weld in rear notches. Looks like the bed will need to be raised about 5-1/2" as expected. Everyhting is just installed loose so far. I also put the rear end housing mounts on the tubes but the are just tacked together and still rotate on the tube. I also plan on doing the crossmember bracing so I got a tabless PB truck arm crossmember too.
  
|
|
|
|
|
08-16-2012, 09:57 PM
|
#62 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
Pictures cont:
    
|
|
|
|
|
08-16-2012, 10:00 PM
|
#63 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
Moving to the front stuff:
    
|
|
|
|
|
08-17-2012, 12:28 AM
|
#64 |
|
Registered User
Join Date: Jan 2007
Location: Winters, Ca.
Posts: 1,069
|
Re: DURG's Black 65 C10
Very Nice! Moving right along! Keep it going.
Tony from Norcal Posted via Mobile Device |
|
|
|
|
08-19-2012, 09:24 PM
|
#65 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
Thanks. I put the front coilovers in, checked out the panhard bar on the rearend, and set the rear coilovers in their mounts. I need to trim a gusset of the rear bridge mount to allow the coilovers to swing inboard slightly. I did a bunch of welding on the rear notches today and cut out the original frame section.
  
|
|
|
|
|
08-19-2012, 09:57 PM
|
#66 |
|
Registered User
Join Date: Mar 2005
Location: Fairfield Maine
Posts: 1,759
|
Re: DURG's Black 65 C10
Going to be badass nice work!
|
|
|
|
|
08-19-2012, 10:17 PM
|
#67 |
|
Account Suspended
Join Date: Jan 2011
Location: Bootjack, Ca.
Posts: 55
|
Re: DURG's Black 65 C10
Great work ! subscribed
|
|
|
|
|
08-19-2012, 10:53 PM
|
#68 |
|
Registered User
Join Date: Feb 2012
Location: DALLAS
Posts: 136
|
Re: DURG's Black 65 C10
Very very nice!
|
|
|
|
|
08-20-2012, 05:54 AM
|
#69 |
|
Registered User
Join Date: Jun 2012
Location: cleawater florida
Posts: 246
|
Re: DURG's Black 65 C10
first time ive seen coilovers with a porterbuilt set up.gotta love porterbuilt.very nice.should handle like a go cart.
|
|
|
|
|
08-25-2012, 06:29 PM
|
#70 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
I did some more work today. Goal was to finish welding up notch lower caps and get rear end hung in place on the trailing arms. Nate is making me another bridge assy as mine apparently was not the right one for the coilover upper mounting. Here are some pictures:
  
|
|
|
|
|
08-25-2012, 06:31 PM
|
#71 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
 Warning: OFF TOPIC! Picture I took along with these ones to post on a Vette forum of my 2011 Grand Sport with black chrome wheels: 
|
|
|
|
|
08-25-2012, 06:36 PM
|
#72 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
It's like Deja Vu all over again here is my Impala a few years ago:
|
|
|
|
|
08-31-2012, 05:22 AM
|
#73 |
|
Registered User
Join Date: Mar 2005
Location: Fairfield Maine
Posts: 1,759
|
Re: DURG's Black 65 C10
Nice work,you are going to have one sweet lineup of of black rides!
|
|
|
|
|
08-31-2012, 06:16 AM
|
#74 |
|
Registered User
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
|
Re: DURG's Black 65 C10
Thanks. I am getting the new Porterbuilt bridge assy. and some misc. hardware I also needed from PB today via UPS if the tracking numbers are accurate. Should get some more time this weekend to work on the truck.
__________________
1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black |
|
|
|
|
08-31-2012, 08:38 AM
|
#75 |
|
Registered User
Join Date: Feb 2011
Location: muskogee, ok
Posts: 1,091
|
Re: DURG's Black 65 C10
badass looking setup!!! nice work
__________________
bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
