Starting problem GONE FOR GOOD!! YAY! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TIMSPEED · 10-10-2003, 04:27 AM

After much trouble, I finally found out I had the WRONG starter on their! So, tonight after I swapped in the CORRECT starter, it started right up, no noise, no problem.

YAY! I'm one happy camper now!

Nvbowtie · 10-10-2003, 04:47 AM

Excellent !!

Prerunner1982 · 10-10-2003, 11:10 AM

79Chevypickup · 10-10-2003, 11:14 AM

Thats cool!!
It always feels good when you figure out the problem!!

78SilveradoSWB · 10-10-2003, 11:42 AM

Was this Kragen's mistake when they sold it you? If yes, did they give you the replacement at no charge?

TIMSPEED · 10-10-2003, 05:53 PM

Quote:

Originally posted by 78SilveradoSWB
Was this Kragen's mistake when they sold it you? If yes, did they give you the replacement at no charge?

Yep, it was Kragen's mistake, and they gave me the CORRECT one at NO charge

Izzy · 10-10-2003, 06:47 PM

Thank god because all your flex plate posts were making me crazy.

TIMSPEED · 10-10-2003, 06:56 PM

Quote:

Originally posted by fiveeightchevy
Thank god because all your flex plate posts were making me crazy.

Trust me, they were driving me crazy too! Now, I just gotta fix my damn oil leak from the back of the intake. haha

Nvbowtie · 10-10-2003, 11:46 PM

Well then, was your original flywheel bent or not ?
"The truth is out there "

apstguy · 10-11-2003, 03:33 AM

Good thing! I was starting to worry about your sanity....

TIMSPEED · 10-11-2003, 03:53 AM

Quote:

Originally posted by apstguy
Good thing! I was starting to worry about your sanity....

So was I...so was I! Trust me, if this starter hadn't of fixed it, I seriously was considering selling my truck for WHATEVER I could get out of it!

10-10-2003, 04:27 AM	#1
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Starting problem GONE FOR GOOD!! YAY! After much trouble, I finally found out I had the WRONG starter on their! So, tonight after I swapped in the CORRECT starter, it started right up, no noise, no problem. YAY! I'm one happy camper now! __________________ I have a few cars... See Them Here

10-10-2003, 04:47 AM	#2
Nvbowtie Registered User Join Date: Jul 2001 Location: Laughlin, Nv. USA Posts: 700	Excellent !! __________________ www.unlimited2u.com/chevy Bill 1980 Chevy C-10 Silverado 1988 Chevy Blazer Tahoe

10-10-2003, 11:14 AM	#4
79Chevypickup MY TRUCK IS FOR SALE!! Join Date: Sep 2003 Location: Pasadena, TX Posts: 292	Thats cool!! It always feels good when you figure out the problem!! __________________ 1979 Chevy LWB 350ci / 700R4 Edelbrock under the hood F O R S A L E OR T R A D E

10-10-2003, 11:42 AM	#5
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Was this Kragen's mistake when they sold it you? If yes, did they give you the replacement at no charge? __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

10-10-2003, 11:46 PM	#9
Nvbowtie Registered User Join Date: Jul 2001 Location: Laughlin, Nv. USA Posts: 700	Well then, was your original flywheel bent or not ? "The truth is out there " __________________ www.unlimited2u.com/chevy Bill 1980 Chevy C-10 Silverado 1988 Chevy Blazer Tahoe

10-10-2003, 11:10 AM	#3
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904

10-10-2003, 06:47 PM	#7
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Thank god because all your flex plate posts were making me crazy.

10-11-2003, 03:33 AM	#10
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	Good thing! I was starting to worry about your sanity.... __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.