Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-13-2003, 08:15 PM | #1 |
Registered User
Join Date: Oct 2003
Location: Carmichael, California
Posts: 3,005
|
disc brake swap question
I just bought disc brakes off of a `71 1/2 ton and they gave me the a-arms too. are the ball joints the same for my 68 and the 71 or do I have to change them?
|
10-13-2003, 08:20 PM | #2 |
Keepin an eye out
Join Date: Feb 2003
Location: So.Cal
Posts: 3,920
|
Not the same. You need to use '71-'72 ball joints.
__________________
1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351 |
10-13-2003, 08:24 PM | #3 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Yup, you will need tierod assys also......& possibly the centerlink. Good luck,crazyL`
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
10-13-2003, 09:30 PM | #4 |
Registered User
Join Date: Oct 2003
Location: Carmichael, California
Posts: 3,005
|
thanks guys. i was afraid of that
__________________
Anthony |
10-13-2003, 11:40 PM | #5 |
Registered User
Join Date: Apr 2003
Location: missouri city, tx
Posts: 4,486
|
good luck!
__________________
70 longbed 496/th400/Ford 9" |
10-14-2003, 05:41 PM | #6 |
Registered User
Join Date: Oct 2003
Location: Carmichael, California
Posts: 3,005
|
will the 71` a-arms fit my truck? i was given those too.
|
10-14-2003, 05:44 PM | #7 |
Registered User
Join Date: May 2001
Location: Benbrook, TX
Posts: 1,060
|
Yes,
Just be careful removing the springs on your truck.
__________________
69 swb stepside, rebuild and upgrade in progress |
10-14-2003, 05:48 PM | #8 |
Registered User
Join Date: Oct 2003
Location: Carmichael, California
Posts: 3,005
|
thanks matt, i always chain the springs so they don`t shoot out. also, how do i know if the upper and lower shafts are worn out?
|
10-14-2003, 06:01 PM | #9 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
yes, the 71 a arms will bolt right on. The bottoms are different than your 68's , in the steer stop location, The top arms do not need to be changed(just bolt the later ball joints in). as far as bushings/shafts, if you feel any looseness at all , replace them. The good thing about the bushings on the 67-72s , is that if you keep them greased.......they are good for about a 1/4 million miles! most of the orig owners did not grease them tho..... crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|