Gaylord Bed Covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Denny · 10-17-2003, 07:59 PM

Does anyone with a Gaylord bed cover live in a northern climate? I was curious how the locks do on them since they are on the top of the cover. I am about ready to buy one and was a little concerned about locks freezing up. Thanks..

Alaska71SWB · 10-18-2003, 04:55 AM

I have had a Gaylord's cover on my 71 for 4 years now without any problems. It is keep inside a heated garage at night and I always spray lock de-icer in all the locks whenever I wash it.

darcane · 10-18-2003, 04:54 PM

I've had my Gaylord lid for eight years now, four of which were in Alaska (as cold as -53' F) and it was always left outside. I never had any problems with the locks, but I made sure the little covers were always on them to keep out the snow. I do have some other problems, but I have no idea if they are weather related or not. The rubber seal is falling off on mine and the hinges ripped a couple of the screws out of the fiberglass.

Denny · 10-18-2003, 07:25 PM

Thanks for the replys guys, I hate frozen locks. Do both of you have the X2000 model?

Blue Beard · 10-19-2003, 09:38 AM

I use liquid graphite on most exterior locks.

After it dries it helps protect them.

Buy the lock caps, and keep them in good condition.

Above all, don't use anything with an oil base for lubrication. Just helps to draw dirt and such inside the lock. Then you have major problems.

Denny · 10-19-2003, 05:37 PM

Thanks for the info Blue Beard, I am really excited to get this camper shell off my truck.

Bill72BB · 10-20-2003, 12:51 AM

Denny ; Don't have any cold weather problems here ,but the new keys and locks that are on mine have no guide tit for the round key so it made it difficult to get it placed right to open or close the locks. I had to put a white dot on the top of the lock so I knew where to place the key with out fumbling around.

Denny · 10-20-2003, 05:15 PM

Thanks Bill72BB, That is a good idea with the dot. I ordered the Gaylord today from California, they said it would take a month to get it. It was such a hassle trying to get it from a Missouri dealer I finally called Gaylord in California and they referred me to their dealer out there. I will be installing it myself. Missouri is the pits.

Bill72BB · 10-20-2003, 06:46 PM

I know what you mean ,West Virginia everything was ordered and took forever to get . I used to get so pissed just trying to get spark plugs and tires for the motorcycle.
Now if you were out here in LA LA land we could have gotten you a blem and saved you some money.

Blue Beard · 10-20-2003, 07:34 PM

I sent a blem back.

They were trying a new paint, had a chemical reaction.

The paint separated like a cracked dash. Looked bad for that type of cash.

They made a new one, sent it and then had a truck come and pick up the old one that was bad.

Denny · 10-20-2003, 08:18 PM

Its a shame to have to order everything from out of town. I just went to Texas in August for a transmission because these yahoos in Missouri can't build one if there life depended on it. The Gaylord dealers here in Missouri were unbelievable. We have two of them in the St. Louis area. The first one I called tried to sell me another brand and the one I had called this morning was real funny. I called and asked if they handled Gaylord products they put me on hold and then gave me a number to call. I call that number and it was some truck parts place that is not a Gaylord dealer. So I call back and ask do you sell Gaylord products or not?
The gal says yes we are a dealer but Susy (what ever her name was is not here right now). I thought ok its time to order from a state that has has their stuff together.

Blue Beard · 10-21-2003, 08:29 AM

The dealer locally was too hard to deal with, called Gaylord direct.

They wouldn't deal direct, but gave me a dealer in California to contact.

Denny · 10-21-2003, 07:56 PM

Was the same here Blue Beard, the California dealer had me set up in 5 minutes.

10-17-2003, 07:59 PM	#1
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Gaylord Bed Covers Does anyone with a Gaylord bed cover live in a northern climate? I was curious how the locks do on them since they are on the top of the cover. I am about ready to buy one and was a little concerned about locks freezing up. Thanks.. __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

10-18-2003, 04:54 PM	#3
darcane Registered User Join Date: Jun 2000 Location: Puyallup, WA Posts: 414	I've had my Gaylord lid for eight years now, four of which were in Alaska (as cold as -53' F) and it was always left outside. I never had any problems with the locks, but I made sure the little covers were always on them to keep out the snow. I do have some other problems, but I have no idea if they are weather related or not. The rubber seal is falling off on mine and the hinges ripped a couple of the screws out of the fiberglass. __________________ *Mike Lackey* '68 C10

10-18-2003, 07:25 PM	#4
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Thanks for the replys guys, I hate frozen locks. Do both of you have the X2000 model? __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

10-19-2003, 09:38 AM	#5
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	I use liquid graphite on most exterior locks. After it dries it helps protect them. Buy the lock caps, and keep them in good condition. Above all, don't use anything with an oil base for lubrication. Just helps to draw dirt and such inside the lock. Then you have major problems. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

10-19-2003, 05:37 PM	#6
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Thanks for the info Blue Beard, I am really excited to get this camper shell off my truck. __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

10-18-2003, 04:55 AM	#2
Alaska71SWB Registered User Join Date: Mar 2000 Location: Anchorage, AK Posts: 70	I have had a Gaylord's cover on my 71 for 4 years now without any problems. It is keep inside a heated garage at night and I always spray lock de-icer in all the locks whenever I wash it.

10-20-2003, 12:51 AM	#7
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Denny ; Don't have any cold weather problems here ,but the new keys and locks that are on mine have no guide tit for the round key so it made it difficult to get it placed right to open or close the locks. I had to put a white dot on the top of the lock so I knew where to place the key with out fumbling around. __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

10-20-2003, 05:15 PM	#8
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Thanks Bill72BB, That is a good idea with the dot. I ordered the Gaylord today from California, they said it would take a month to get it. It was such a hassle trying to get it from a Missouri dealer I finally called Gaylord in California and they referred me to their dealer out there. I will be installing it myself. Missouri is the pits. __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

10-20-2003, 06:46 PM	#9
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	I know what you mean ,West Virginia everything was ordered and took forever to get . I used to get so pissed just trying to get spark plugs and tires for the motorcycle. Now if you were out here in LA LA land we could have gotten you a blem and saved you some money. __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

10-20-2003, 07:34 PM	#10
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	I sent a blem back. They were trying a new paint, had a chemical reaction. The paint separated like a cracked dash. Looked bad for that type of cash. They made a new one, sent it and then had a truck come and pick up the old one that was bad. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

10-20-2003, 08:18 PM	#11
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Its a shame to have to order everything from out of town. I just went to Texas in August for a transmission because these yahoos in Missouri can't build one if there life depended on it. The Gaylord dealers here in Missouri were unbelievable. We have two of them in the St. Louis area. The first one I called tried to sell me another brand and the one I had called this morning was real funny. I called and asked if they handled Gaylord products they put me on hold and then gave me a number to call. I call that number and it was some truck parts place that is not a Gaylord dealer. So I call back and ask do you sell Gaylord products or not? The gal says yes we are a dealer but Susy (what ever her name was is not here right now). I thought ok its time to order from a state that has has their stuff together. __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

10-21-2003, 08:29 AM	#12
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	The dealer locally was too hard to deal with, called Gaylord direct. They wouldn't deal direct, but gave me a dealer in California to contact. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

10-21-2003, 07:56 PM	#13
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Was the same here Blue Beard, the California dealer had me set up in 5 minutes. __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.