wilwood prop valve issues

[vjjack04]

Folks,
My proportioning valve is not letting fluid go to the rear brakes. It seemed to be working when i first put it in, but not now. I took it apart but can't be sure if it is working.....I have fluid to the "in" from the master cylinder but the valve seems to be going bad....anyone experience this?

[solidaxel]

The way i solved this problem I plugged one half of the M/C and worked on one end at a time by bleeding the wheels until I had a good pedel and fluid.
I then hooked up the other half and bled that end until I had good pedel and no more air.
Get a good helper and another quart of fluid, you can do it !!

[vjjack04]

Originally Posted by solidaxel

The way i solved this problem I plugged one half of the M/C and worked on one end at a time by bleeding the wheels until I had a good pedel and fluid.
I then hooked up the other half and bled that end until I had good pedel and no more air.
Get a good helper and another quart of fluid, you can do it !!

Thanks, but I think having the brake system together for a year with no fluid, dry rotted the inner seal.....I took it apart and it seemed to have issues. Once I blew out the housing and got the seal moving it worked better and I had brakes....however, I am going to get a new prop valve just to ensure things are ok......this is/was annoying....I do appreciate you response though...