Steering wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**steelhorse** · 10-25-2012, 08:48 AM

I am looking for pics of trucks with old style steering wheels.Either original or old chevelle,caddy ect. I just like the look of the old stuff vs new billet.

bopper_702 · 10-25-2012, 10:54 AM

my 68's originl wheel

Andy4639 · 10-25-2012, 11:51 AM

I'm in the process of restoring a 67 SS Chevell wheel now. I got all the cracks filled and plan to start sanding it later today.

*Mister-B* · 10-25-2012, 12:03 PM

Quote:

Originally Posted by Andy4639

I'm in the process of restoring a 67 SS Chevell wheel now. I got all the cracks filled and plan to start sanding it later today.

That's cool. Never thought of doing that. I have a '69 truck, and mine is all cracked. I like the style and feel of the wheel I have, but damn the replacements are expensive. So, how do you go about this? Can you repaint it when done? Do you think the paint will last without rubbing off?
Posted via Mobile Device

Andy4639 · 10-25-2012, 12:10 PM

I plan to repaint it. I think it should last a while if done correctly which I hope I'm doing. I never tried before so I'm learning as I go. With a good paint job and clear coat it should be fine though. The picture is after I filed the cracks and filled them with body filler.

hayhauler71 · 10-25-2012, 12:23 PM

stock got this one at a swap meet for $20.00 with no cracks

Southcity · 10-25-2012, 12:54 PM

restored the wheel about a year ago and it's holding up well
Name: IMG-20110625-00268.jpg
Views: 481
Size: 38.9 KB

*Mister-B* · 10-25-2012, 01:09 PM

Quote:

Originally Posted by Southcity

restored the wheel about a year ago and it's holding up well
Attachment 1003463

Wow. That looks really nice. How did you do it?
Posted via Mobile Device

Mr Chevorlet · 10-25-2012, 01:15 PM

Here is a 67 wheel on a tilt column

96blazr · 10-25-2012, 02:03 PM

I'm using a Mooneyes 13.5" wheel. If I didn't have PS, I'd be using something a little bigger.

Southcity · 10-25-2012, 02:19 PM

Quote:

Originally Posted by Mister-B

Wow. That looks really nice. How did you do it?
Posted via Mobile Device

Thanks -(kinda short version) filed any cracks/crevices on the wheel, the majority of them were all where the outside ring meets the three spokes, used jbweld on the large ones and finished off with a little filler, used just filler on the tiny cracks, sanded, sanded, sanded, sanded - prepped for primer/paint. Painted it at a friends house with duplicolor pre mixed paint/sealer.

kcsa75 · 10-25-2012, 11:37 PM

Here's mine. Chevy used these wheels on Chevelles, Monte Carlos even Vegas in the early 70s. Mine has a bowtie in the center not the SS.

**FirstOwner69** · 10-26-2012, 12:10 AM

Quote:

Originally Posted by kcsa75

Here's mine. Chevy used these wheels on Chevelles, Monte Carlos even Vegas in the early 70s. Mine has a bowtie in the center not the SS.

That wheel was also used on 1976 Corvettes only.

heathbirkendahl · 10-26-2012, 12:18 AM

Posted via Mobile Device

Z10 · 10-26-2012, 12:27 AM

Quote:

Originally Posted by FirstOwner69

That wheel was also used on 1976 Corvettes only.

And Vegas........

68Stepbed · 10-26-2012, 07:36 AM

I can't beleive no one has posted a comfortgrip wheel yet.

gotchamel · 10-26-2012, 08:05 AM

Quote:

Originally Posted by Z10

And Vegas........

and Monzas

Square_78 · 10-26-2012, 08:07 AM

I love the old Chevelle wheels. If I ever find one I will swap out my billet one right away!

nate_g_2003 · 10-26-2012, 10:50 AM

Kind of dark pic, but mine is the stock style, with a later model (80s/early 90s) horn button/cap from a GMC van

blackhawkip · 10-26-2012, 09:29 PM

Original 1965 Corvette steering wheel.

10-25-2012, 08:48 AM	#1
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	Steering wheels I am looking for pics of trucks with old style steering wheels.Either original or old chevelle,caddy ect. I just like the look of the old stuff vs new billet.

10-25-2012, 10:54 AM	#2
bopper_702 Registered User Join Date: Jun 2012 Location: LAS VEGAS, NEVADA Posts: 105	Re: Steering wheels my 68's originl wheel

10-25-2012, 11:51 AM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Steering wheels I'm in the process of restoring a 67 SS Chevell wheel now. I got all the cracks filled and plan to start sanding it later today. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-25-2012, 12:10 PM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Steering wheels I plan to repaint it. I think it should last a while if done correctly which I hope I'm doing. I never tried before so I'm learning as I go. With a good paint job and clear coat it should be fine though. The picture is after I filed the cracks and filled them with body filler. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-25-2012, 12:23 PM	#6
hayhauler71 Registered User Join Date: Aug 2009 Location: St. Paul MN. Posts: 1,996	Re: Steering wheels stock got this one at a swap meet for $20.00 with no cracks Attached Images __________________ Fuzzy

10-25-2012, 12:54 PM	#7
Southcity Registered User Join Date: Aug 2007 Location: Redwood City, CA Posts: 1,177	Re: Steering wheels restored the wheel about a year ago and it's holding up well __________________ 66 GMC Suburban Custom 66 Chevy K10 Suburban

10-25-2012, 01:15 PM	#9
Mr Chevorlet Rusty Nuts Join Date: Sep 2008 Location: Clever Missouri Posts: 1,338	Re: Steering wheels Here is a 67 wheel on a tilt column Attached Images __________________ (Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414

10-25-2012, 02:03 PM	#10
96blazr Registered User Join Date: Aug 2003 Location: VA Posts: 740	Re: Steering wheels I'm using a Mooneyes 13.5" wheel. If I didn't have PS, I'd be using something a little bigger. Attached Images __________________ 1968 SWB. GMPP 350/350 Turbo Trans, Edelbrock Performer & Carb. Hedman Hedders, Hooker Aerochambers Mufflers. Tuff Stuff Alternators. Remember, no matter where you go, There you are. Gary

10-25-2012, 11:37 PM	#12
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: Steering wheels Here's mine. Chevy used these wheels on Chevelles, Monte Carlos even Vegas in the early 70s. Mine has a bowtie in the center not the SS. Attached Images __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

10-26-2012, 12:18 AM	#14
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Re: Steering wheels Posted via Mobile Device Attached Images __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

10-26-2012, 07:36 AM	#16
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Steering wheels I can't beleive no one has posted a comfortgrip wheel yet. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

10-26-2012, 08:07 AM	#18
Square_78 Registered User Join Date: Mar 2012 Location: Okanagan Valley, BC, Canada Posts: 1,237	Re: Steering wheels I love the old Chevelle wheels. If I ever find one I will swap out my billet one right away! __________________ #teamlongbed "I refuse to go disc brakes. I actually love drum brakes. It makes for an adventure." - 50bomb 1978 Chevy shop truck - static 6/8" 1970 GMC 1500 - Accuair eLevel Resto-mod http://67-72chevytrucks.com/vboard/s...d.php?t=537497

10-26-2012, 10:50 AM	#19
nate_g_2003 Registered User Join Date: Jun 2011 Location: Gregory, TX Posts: 413	Re: Steering wheels Kind of dark pic, but mine is the stock style, with a later model (80s/early 90s) horn button/cap from a GMC van Attached Images __________________ -Nathan- 1972 GMC K2500 Suburban "The Project" 2013 GMC Sierra 1500 SLT Z71 "The Daily Driver" 2005 Ford F150 Lariat SCrew 2WD "The Daily Driver" SOLD 1995 GMC Sierra C1500 SLE "The Daily Driver"SOLD 2003 Ford Ranger Edge 2DSC 2WD Flareside "The Daily Driver/Project"SOLD

10-26-2012, 09:29 PM	#20
blackhawkip Registered User Join Date: Dec 2011 Location: Fort Knox, KY Posts: 212	Here's mine..... Original 1965 Corvette steering wheel. Attached Images __________________ 1972 Cheyenne Super K20 4wd 1972 Chevy Camaro Z28 1972 Cheyenne Super K30 (sold) 1972 Cheyenne Super Shortbed w/402bb (sold) 1972 Custom/Deluxe 2wd Suburban w/402bb (sold) plus too many others.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.