1969 SuperBurb build-up (Bagged and Blown!) - Page 51 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigbadcad · 11-04-2012, 03:20 PM

so I got to ask, how have you stayed focused all the years on the Superburb? I've got a project not one of my trucks thats 4 years in and I've run out of energy on it. love the Build hopefully I can get to my 67 burb one day.

pickup67man · 11-04-2012, 09:57 PM

Quote:

Originally Posted by bigbadcad

so I got to ask, how have you stayed focused all the years on the Superburb? I've got a project not one of my trucks thats 4 years in and I've run out of energy on it. love the Build hopefully I can get to my 67 burb one day.

Welcome to the forum. If you keep reading builds like this you will get your energy back. These guys will build and you will get back to work on yours.

kvn1011 · 11-05-2012, 03:55 PM

The controller and guages all look right at home!! Looking good!!
Posted via Mobile Device

**68 Four on the Floor** · 11-05-2012, 08:09 PM

Lookin good man

72 SHORTBED 7.0 · 11-07-2012, 10:10 AM

Nice and clean that's going to be one nice burb...
Posted via Mobile Device

**67cheby** · 11-07-2012, 10:57 AM

LOVE this sub, nice progress !

**Hart_Rod** · 11-09-2012, 02:23 PM

Quote:

Originally Posted by blfuller123

I love that controller, i was just looking at that same one the other day.

It goes well with the VHX gauges.

Quote:

Originally Posted by sourkraut

Looking cool! Sorry bad one I know
Posted via Mobile Device

Quote:

Originally Posted by bigbadcad

so I got to ask, how have you stayed focused all the years on the Superburb? I've got a project not one of my trucks thats 4 years in and I've run out of energy on it. love the Build hopefully I can get to my 67 burb one day.

, take a break and get back on it!!

Quote:

Originally Posted by pickup67man

Welcome to the forum. If you keep reading builds like this you will get your energy back. These guys will build and you will get back to work on yours.

What he said,

.

Quote:

Originally Posted by kvn1011

The controller and guages all look right at home!! Looking good!!
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by 68 Four on the Floor

Lookin good man

Thanks!

Quote:

Originally Posted by 72 SHORTBED 7.0

Nice and clean that's going to be one nice burb...
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by 67cheby

LOVE this sub, nice progress !

Thanks. I wish I had your endurance, I would probably be done by now...

.

**Hart_Rod** · 11-20-2012, 08:50 PM

I was messing around a little the other day in the shop and finally got the Vintage Air Gen IV unit mounted up,

. I still need to figure out where I'm going to have my lines come through the firewall. Kinda tough to do with a painted truck, can't make any mistakes here....I should have done this prior to paint, but you know how that goes...

CLTBurban · 11-20-2012, 08:55 PM

That's always the way it goes... It's going to be awesome though!

**67cheby** · 11-20-2012, 09:16 PM

Nice
Posted via Mobile Device

raull · 11-20-2012, 11:09 PM

looks nice !!!!!!, have you thought about running the houses through the side vent door , thats how big al's are ran , they cut a very small portion of the oval side vent door and ran them under the fender , just an idea

**Hart_Rod** · 11-21-2012, 12:39 AM

Quote:

Originally Posted by CLTBurban

That's always the way it goes... It's going to be awesome though!

, u know it. Thanks!

Quote:

Originally Posted by 67cheby

Nice
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by raull

looks nice !!!!!!, have you thought about running the houses through the side vent door , thats how big al's are ran , they cut a very small portion of the oval side vent door and ran them under the fender , just an idea

Do you have any pictures Raul?
Posted via Mobile Device

raull · 11-21-2012, 12:49 AM

here ya go bud !!!

**superflysteiny** · 11-21-2012, 01:24 AM

Looks great. I love it. Just wanted you to know your blower is going out on Friday. I will shoot you a tracking number. Thanks
Posted via Mobile Device

blfuller123 · 11-30-2012, 10:43 AM

Are you going to have rear a/c?

jeffg1010 · 12-27-2012, 12:17 PM

Hey Rob, we need an update!

Quote:

Originally Posted by blfuller123

Are you going to have rear a/c?

I don't wanna hijack the Superburb's thread. After all, he needs to stay focused on getting ready for the Hot Rod Power Tour

, but I read in your thread that you were looking for a dual air option. I will post what I did on your build thread.

**Hart_Rod** · 01-04-2013, 07:22 PM

Quote:

Originally Posted by raull

here ya go bud !!!

Thanks Raul!

Quote:

Originally Posted by superflysteiny

Looks great. I love it. Just wanted you to know your blower is going out on Friday. I will shoot you a tracking number. Thanks
Posted via Mobile Device

Thanks Eric!

Quote:

Originally Posted by blfuller123

Are you going to have rear a/c?

Haven't decided yet. Will probably see how the single unit does and then go from there.....

Quote:

Originally Posted by jeffg1010

Hey Rob, we need an update!

I don't wanna hijack the Superburb's thread. After all, he needs to stay focused on getting ready for the Hot Rod Power Tour

, but I read in your thread that you were looking for a dual air option. I will post what I did on your build thread.

, pressure, pressure, pressure!!! Holidays slowed me down some, but making headway on small things such as installing the cruise control stalk into my Flaming River tilt column, what a PITA!!!!

502ms · 01-05-2013, 11:45 AM

Wow! Great progress! Superb
Posted via Mobile Device

Moccelin · 01-05-2013, 02:57 PM

This project set a new standard to folow when I start to rebuild my Chevrolet Veraneio (a General Motors Brasil body design on top of a 67-72 chassi and 50-60s engine)... Even the engine swap made some basic ideas to jump out from my head...

The care with the details was awsome.

When I start my project I will post here in the Message Board.

**Hart_Rod** · 01-05-2013, 03:27 PM

Quote:

Originally Posted by 502ms

Wow! Great progress! Superb
Posted via Mobile Device

Thanks you!

Quote:

Originally Posted by Moccelin

This project set a new standard to folow when I start to rebuild my Chevrolet Veraneio (a General Motors Brasil body design on top of a 67-72 chassi and 50-60s engine)... Even the engine swap made some basic ideas to jump out from my head...

The care with the details was awsome.

When I start my project I will post here in the Message Board.

Thanks! I'm flattered and look forward to seeing your build thread.

gumbys10 · 01-08-2013, 12:01 AM

So I am trying to decide on Headers, among other things. I am looking either at the DT's you have, or Kooks TBSS long tubes. My questions to you are, have you tried them on yet? Are you still using column shift, if so are you using linkage or shift cable?

**Hart_Rod** · 01-08-2013, 12:41 PM

Quote:

Originally Posted by gumbys10

So I am trying to decide on Headers, among other things. I am looking either at the DT's you have, or Kooks TBSS long tubes. My questions to you are, have you tried them on yet? Are you still using column shift, if so are you using linkage or shift cable?

With the ECE mounts, the Doug Thorley 324y's work great. I have a column shift and I used the Lokar shift rod kit. I don't have any info on the Kooks TBSS headers.

Bhelton · 01-20-2013, 11:02 AM

Small progress, but progress none the less. I've been focusing on the 68 trying to get it ready for the last leg of the PowerTour, but I did get my upper and lower hoses figured out. I just need to work on the radiator mounts and then the cooling system will be done. I picked up some adapters from Docs Blocks for the a/c also. Looks like they will have to be modified slightly to make them work, but what else is new....

.

R/[/QUOTE]

Would you happen to remember what hose part numbers you used?

Thanks Ben

**Hart_Rod** · 01-29-2013, 10:23 PM

Quote:

Originally Posted by Bhelton

Would you happen to remember what hose part numbers you used?

Thanks Ben

I'll have to look. Had 4 big boxes show up today......

....what do you think????

C10_ustacould · 01-29-2013, 10:31 PM

So sweet! one more set and it's a trifecta! Well... sorta!

11-04-2012, 03:20 PM	#1251
bigbadcad Registered User Join Date: Mar 2012 Location: buford Posts: 8	Re: 1969 SuperBurb build-up (Bagged and Blown!) so I got to ask, how have you stayed focused all the years on the Superburb? I've got a project not one of my trucks thats 4 years in and I've run out of energy on it. love the Build hopefully I can get to my 67 burb one day.

11-05-2012, 03:55 PM	#1253
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: 1969 SuperBurb build-up (Bagged and Blown!) The controller and guages all look right at home!! Looking good!! Posted via Mobile Device __________________ My Build Thead (Project Slow Motion)

11-05-2012, 08:09 PM	#1254
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: 1969 SuperBurb build-up (Bagged and Blown!) Lookin good man

11-07-2012, 10:10 AM	#1255
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: 1969 SuperBurb build-up (Bagged and Blown!) Nice and clean that's going to be one nice burb... Posted via Mobile Device

11-07-2012, 10:57 AM	#1256
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 SuperBurb build-up (Bagged and Blown!) LOVE this sub, nice progress ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-20-2012, 08:50 PM	#1258
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 SuperBurb build-up (Bagged and Blown!) I was messing around a little the other day in the shop and finally got the Vintage Air Gen IV unit mounted up, . I still need to figure out where I'm going to have my lines come through the firewall. Kinda tough to do with a painted truck, can't make any mistakes here....I should have done this prior to paint, but you know how that goes... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-20-2012, 08:55 PM	#1259
CLTBurban Registered User Join Date: Jul 2008 Location: Charlotte, NC Posts: 220	Re: 1969 SuperBurb build-up (Bagged and Blown!) That's always the way it goes... It's going to be awesome though! __________________ '72 GMC Suburban 1/2 Ton (Red) '68 C10 Short Fleet (OG 503 Light Green and Patina) '70 C30 Dually (OG City of Charlotte Welding Truck) Past 67-72's Chevy Trucks '68 C10 Short Fleet on 20" Coy's, '72 C20 Suburban (Ochre Big Block), '69 C20 Suburban (Silver), '69 C10 Suburban (Red/White on Boyd's), '72 C10 Short Fleet (Ochre on Torq's), '70 C10 Short Fleet (POS)

11-20-2012, 09:16 PM	#1260
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 SuperBurb build-up (Bagged and Blown!) Nice Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-20-2012, 11:09 PM	#1261
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1969 SuperBurb build-up (Bagged and Blown!) looks nice !!!!!!, have you thought about running the houses through the side vent door , thats how big al's are ran , they cut a very small portion of the oval side vent door and ran them under the fender , just an idea __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

11-21-2012, 12:49 AM	#1263
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1969 SuperBurb build-up (Bagged and Blown!) here ya go bud !!! Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

11-21-2012, 01:24 AM	#1264
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looks great. I love it. Just wanted you to know your blower is going out on Friday. I will shoot you a tracking number. Thanks Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-30-2012, 10:43 AM	#1265
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 1969 SuperBurb build-up (Bagged and Blown!) Are you going to have rear a/c?

01-05-2013, 11:45 AM	#1268
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: 1969 SuperBurb build-up (Bagged and Blown!) Wow! Great progress! Superb Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

01-05-2013, 02:57 PM	#1269
Moccelin Registered User Join Date: Dec 2012 Location: Varginha - MG - Brazil Posts: 8	Re: 1969 SuperBurb build-up (Bagged and Blown!) This project set a new standard to folow when I start to rebuild my Chevrolet Veraneio (a General Motors Brasil body design on top of a 67-72 chassi and 50-60s engine)... Even the engine swap made some basic ideas to jump out from my head... The care with the details was awsome. When I start my project I will post here in the Message Board. Last edited by Moccelin; 01-05-2013 at 03:04 PM.

01-08-2013, 12:01 AM	#1271
gumbys10 Registered User Join Date: Aug 2010 Location: Regina Saskatchewan Posts: 213	Re: 1969 SuperBurb build-up (Bagged and Blown!) So I am trying to decide on Headers, among other things. I am looking either at the DT's you have, or Kooks TBSS long tubes. My questions to you are, have you tried them on yet? Are you still using column shift, if so are you using linkage or shift cable? __________________ http://67-72chevytrucks.com/vboard/s...17#post5397317 http://67-72chevytrucks.com/vboard/s...d.php?t=520480



Register or Log In To remove these advertisements.

01-20-2013, 11:02 AM	#1273
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: 1969 SuperBurb build-up (Bagged and Blown!) Small progress, but progress none the less. I've been focusing on the 68 trying to get it ready for the last leg of the PowerTour, but I did get my upper and lower hoses figured out. I just need to work on the radiator mounts and then the cooling system will be done. I picked up some adapters from Docs Blocks for the a/c also. Looks like they will have to be modified slightly to make them work, but what else is new..... R/[/QUOTE] Would you happen to remember what hose part numbers you used? Thanks Ben

01-29-2013, 10:31 PM	#1275
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 1969 SuperBurb build-up (Bagged and Blown!) So sweet! one more set and it's a trifecta! Well... sorta! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.