|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-06-2012, 09:17 AM
|
#1 |
|
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Air-Lift for our truck
 __Does anyone know where I can find a set of Air-Lift bags for a '70 coil spring rear? I have 4" drop springs and I would like to have the bags to use when loaded or trailer pulling. Looked at Air-Lifts website and they don't list anything for my '70 stepper. Not looking for trick stuff, just a basic overload set-up. . Thanks |
|
|
|
11-06-2012, 09:41 PM
|
#2 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Air-Lift for our truck
Rob I used a set of jeep bags with extra spacers.
   Ran the 2 air lines back to the bumper and used the Schrader valves to hang the tag with.  http://67-72chevytrucks.com/vboard/s...d.php?t=425850
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
11-07-2012, 05:08 AM
|
#3 |
|
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: Air-Lift for our truck
Went through this a couple of months ago.
http://67-72chevytrucks.com/vboard/s...d.php?t=537391 From what I was able to find they only have a 2wd Blazer listing posted. That should be the corrrect application for a C/10 as well. Poster never followed up so you get to. http://shop.airliftcompany.com/produ...G_LEVELING_KIT
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
|
|
|
|
11-07-2012, 08:15 AM
|
#4 |
|
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Re: Air-Lift for our truck
Thanks guys for the responses. Andy , are those rear spings dropped or stock? And Tim, I may pursue the link further.
. Again thanks, . Robbie Robinson a.k.a. TobyArnot
__________________
MY MOTTO: Eat it all up, Wear it out, Use the last few drops, Spend all you've got, Late in life, you'll think of the things you didn't do, not the things you did. - Get out and experience life ! . Robbie Robinson a.k.a. TobyArnot (Toe Bee or not toe bee) 
|
|
|
|
|
11-07-2012, 09:29 AM
|
#5 |
|
Account Suspended
Join Date: Oct 2012
Location: phx, az
Posts: 868
|
Re: Air-Lift for our truck
super easy, buy the parts make it work. air bags are very easy going
|
|
|
|
|
11-07-2012, 04:38 PM
|
#6 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Air-Lift for our truck
Yes droped springs. I got tired of it bottoming out with them. They have hardley any stiffness to them. The air bags make for a very nice ride now.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
11-07-2012, 08:22 PM
|
#7 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Air-Lift for our truck
Here is the post. It took me a while to find it but here it is.
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
11-07-2012, 08:27 PM
|
#8 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
|
Re: Air-Lift for our truck
Have you tried talking to them? I know for a fact that they used to have them for these trucks. I ran a set in the rear of a '70 Custom/10 I had. I got them through the spring shop I've dealt with forever.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
11-07-2012, 08:37 PM
|
#9 |
|
Registered User
Join Date: Mar 2011
Location: Oak Ridge NC
Posts: 957
|
Re: Air-Lift for our truck
Andy, thanks for the information and part numbers. I will likely need this since I plan on hauling my boat with a 4/6" drop.
|
|
|
|
|
08-24-2014, 09:46 PM
|
#10 |
|
Account Suspended
Join Date: Jul 2014
Location: NH
Posts: 280
|
Re: Air-Lift for our truck
What keeps the bolts holding the spring cups in from puncturing the top and bottom of the bags?
|
|
|
|
|
08-25-2014, 09:16 PM
|
#11 |
|
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Re: Air-Lift for our truck
I'll jump in here. If you look at Andy's photos, you'll see one black spacer below the bag, and two spacers on top. The bags we both used are for a Jeep and are fairly short. The spacers have a large hole in the center and they keep the bags away from the bolts.
__________________
MY MOTTO: Eat it all up, Wear it out, Use the last few drops, Spend all you've got, Late in life, you'll think of the things you didn't do, not the things you did. - Get out and experience life ! . Robbie Robinson a.k.a. TobyArnot (Toe Bee or not toe bee)
|
|
|
|
|
08-25-2014, 09:41 PM
|
#12 |
|
Account Suspended
Join Date: Jul 2014
Location: NH
Posts: 280
|
Re: Air-Lift for our truck
Ok. Sweet! Thanks. Where would I get the extra spacers or do they come with the kit?
|
|
|
|
|
08-26-2014, 06:16 AM
|
#13 |
|
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Re: Air-Lift for our truck
Not sure if "Air Lift" can supply them. I made mine from some 3" UHMW stock that was "hanging around' at the shop where I used to work. I made each one 1" thick x 3" dia. with a 1" hole in the center, and added a notch in the top one for routing the air line out. I had some pics somewhere, but I can't seem to find them.
|
|
|
|
|
08-26-2014, 09:40 AM
|
#14 |
|
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Re: Air-Lift for our truck
Found the pics.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
