'77 c10 "charlene" bagged on billets

[DIRTY HAIR]

Originally Posted by bbbc10

hell yeaa hair!! Looks baadass!!!

thanks, goal is to have her running and legit by turkey drag.
The count down is on.

[chevybuilder18]

Originally Posted by DIRTY HAIR

Ok so ive been snooping around on this sight for 2 years now and didnt want to post my build thread til i had something a little worthy for criticizing.

Ive had this truck for a few years now, it was my daily until i started fixing things that werent broke and then i totally lost interest for almost 2 years. Wanted a street and strip but now i think i know what direction im headed for.

I started my "re" build around january and im right smack in the middle of it. Its a 77 swb with a 383 stroker aluminum heads, muth a thumper cam, hooker shortys, 3" exhaust blah blah blah, some porterbuilt goodies, and sitting on 22/24 centerline smoothies with a healthy set of tires.

Ill start with where i am with the truck right now and then ill post some old pics of the build later.

Im sorry but i dont think your gonna get us off that first look. sexy truck!

[Devillusion]

Great job so far, love the wheels. Plan on possibly using those on my crew project as well. Very good looking setup.

[rusty76]

Dude hubcaps are from a Chevette. I know we had two when I was kid. Funny now maybe they'll go faster than 80mph.....great truck!

[DIRTY HAIR]

thanks guys, ya i was told before they are from a chevette, never seen them on a smoothie so i jumped all on them. they are pretty thin compared to what others are using.

UPDATE: i was supposed to get the truck out the shop yesterday but we had an issue with the mini spool. but now the carbs adjusted, fuel press regulated, new steering gear box installed, gauges all work and light up, switch panel works with push start, pinion angle on rear end is set, trucks timing has been set and a couple other small oddds and ends.

still need to get a front alignment, balance tires, new wind sheild, inspection, seat belt bracket, wire up the horn, fix pass signal lights, and wire up the air ride before next weekends turkey drag. talk about a sema crunch

[chevybuilder18]

Originally Posted by DIRTY HAIR

thanks guys, ya i was told before they are from a chevette, never seen them on a smoothie so i jumped all on them. they are pretty thin compared to what others are using.

UPDATE: i was supposed to get the truck out the shop yesterday but we had an issue with the mini spool. but now the carbs adjusted, fuel press regulated, new steering gear box installed, gauges all work and light up, switch panel works with push start, pinion angle on rear end is set, trucks timing has been set and a couple other small oddds and ends.

still need to get a front alignment, balance tires, new wind sheild, inspection, seat belt bracket, wire up the horn, fix pass signal lights, and wire up the air ride before next weekends turkey drag. talk about a sema crunch

what happened to your mini spool? What kind fuel pressure are you running?

[DIRTY HAIR]

Originally Posted by chevybuilder18

what happened to your mini spool? What kind fuel pressure are you running?

mini spool has been installed and i cant stop burnung out in this thing.

[DIRTY HAIR]

updates updates updates... truck has been tagged and inspec. been driving it alot lately, but boy does it drink up gas... the price of hearing that radical cam huh?

[DIRTY HAIR]

still working out some of the bugs, need to raise the upper a arms and maybe z it here soon. but other than that ive seemed to have fixed all the oil leaks by having the cork gaskets all replaced with rubber gaskets. floor shifter works like a dream, trans still shifts super smooth

[DIRTY HAIR]

i installed the interior... and dash, all the gages work (first time for that). i modified the pannels from a roll up window style k5, to fit my electric window doors

[DIRTY HAIR]

stripped my caps, thought it added a good touch

[DIRTY HAIR]

finally got around to wiring up the switches

[DIRTY HAIR]

lasered out some hood pin mouny disks out of 304 stainless steel, not sure what you call em but the made in china ones were too thin...

[DIRTY HAIR]

i fabbed some seat belt brackets out of some scrap 2x2 square tubbing... turned out nice i think,,,also installed a lap belt for the center of the bench..."she" usually sits there

[DIRTY HAIR]

re routed the trans line to the cooler through the pass side frame,,, mounted the fuel press reg on the frame, installed my porterbuilt firewall cover and oil breather tank. cleaned up and cut out any extra wires i had hanging on the fire wall. ignition box was installed behind the porterbuilt firewall cover and all wires to and from it were hidden as well..

[DIRTY HAIR]

randoms and rolling shots...

[DIRTY HAIR]

feel free to comment guys, need some feed back, havent really shown this truck off in a couple years and it feels good to be beating the streets again

[DIRTY HAIR]

aired up

[DIRTY HAIR]

"commercial break" heres some of my latest works... for sale, will ship

[king-918]

Originally Posted by DIRTY HAIR

"commercial break" heres some of my latest works... for sale, will ship

How much for a one off
Posted via Mobile Device

[maxxxy]

Sweet truck man! I'm surprised I missed it! keep it up!

[DIRTY HAIR]

Originally Posted by king-918

How much for a one off
Posted via Mobile Device

it runs a hundred and i can ship two copies of it

[DIRTY HAIR]

Originally Posted by maxxxy

Sweet truck man! I'm surprised I missed it! keep it up!

thanks

[Devillusion]

You do any square bodies in the paint? and how big? I could use a few prints like that for my rec room.

Shoot me an email on all the details if you don't mind.

automationcreations@inetbiz.ca

[96twodoor]

truck looks great man.