AL WTB: 60-62 factory power steering

[GMCNUT]

I have asked before but need to refresh - I need a factory slave cyl power steering assembly off any 1960, 1961 or 1962 torsion bar / box framed Chevy or GMC 1/2 thru 1 ton. Not important if it does not have the engine pump but if off a Chevrolet and does have the pump I will pay top dollar for it.

If its off a GMC that is perfectly fine too - GMC's, and Suburbans are where you find this type power steering mostly - willing to pay anyone a handsome fee if you can produce one - condition is unimportant, and I do not care about the slave cyl condition at all....

The 1963-66 trucks used a non-boxed "C" channel frame so the drag link and frame bracket for the slave cyl arm are made different. Cannot use one off a 63-66. The one I need will have a bracket bolted to the backside of the steering sector on the inside left frame rail that looks exactly like my attached photos - open the hood and look down and this is what you should see. Identifying this bracket is the fastest way to recognize if your unit is what I want....

Thanks for helping me!! Steve 256-486-1988

[GMCNUT]

man this is hard to find....

[GMCNUT]

ttt

[GMCNUT]

I feel like somebody is gonna pipe up any minute and tell me they have this power steering I need....