Engine Nr...gm target master 10066036 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

The German · 12-04-2012, 03:20 PM

Hi guys!

I have the engine no.10066036!

Now i want to order some parts at summit!

The question is...is it a small block generation I or Chevy small block Gen II (LT-based engines)!?

Regards

Sascha

trac209 · 12-04-2012, 03:38 PM

The engine is a 1st gen small block. as long as the heads have not been changed to vortec or tbi heads. Are they perimeter bolt valve covers or center bolt? as long as they are perimeter style valve covers all early sbc parts will bolt onto it. The other heads on that block will require different intakes as they use specific bolt angles and configurations. hope this helps

Lee H · 12-04-2012, 03:46 PM

A quick search on google was not much help, appears they could be either, although most discussion leaned towards gen 1. What is the date code, which side is the dip stick on? If it has heads on it what are they? Do you know if it's one or two piece rear main?

The German · 12-05-2012, 03:53 PM

The date code is 93! The dipstick is und the passenger side! I have mounted edelbrock zylinderhead covers. This are stock covers from a small block!

Sascha

12-04-2012, 03:20 PM	#1
The German Registered User Join Date: Nov 2010 Location: Germany Posts: 78	Engine Nr...gm target master 10066036 Hi guys! I have the engine no.10066036! Now i want to order some parts at summit! The question is...is it a small block generation I or Chevy small block Gen II (LT-based engines)!? Regards Sascha

12-04-2012, 03:38 PM	#2
trac209 Registered User Join Date: Dec 2011 Location: winnipeg Posts: 1,107	Re: Engine Nr...gm target master 10066036 The engine is a 1st gen small block. as long as the heads have not been changed to vortec or tbi heads. Are they perimeter bolt valve covers or center bolt? as long as they are perimeter style valve covers all early sbc parts will bolt onto it. The other heads on that block will require different intakes as they use specific bolt angles and configurations. hope this helps

12-04-2012, 03:46 PM	#3
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Engine Nr...gm target master 10066036 A quick search on google was not much help, appears they could be either, although most discussion leaned towards gen 1. What is the date code, which side is the dip stick on? If it has heads on it what are they? Do you know if it's one or two piece rear main? __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

12-05-2012, 03:53 PM	#4
The German Registered User Join Date: Nov 2010 Location: Germany Posts: 78	Re: Engine Nr...gm target master 10066036 The date code is 93! The dipstick is und the passenger side! I have mounted edelbrock zylinderhead covers. This are stock covers from a small block! Sascha

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.