Going to go look at a bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Car'n'Guitars · 12-16-2012, 01:19 PM

Alright in about 2 hours I'm going to go look at a bed for my truck, is there anything specific besides rust I should look for? Any specific areas I should be looking at for hidden damage or rust?

willett · 12-16-2012, 02:04 PM

if it doesnt come with a tailgate or you want to use your old one make sure that the piviot points are the same, I have 2 boxes and the tailgates aren't interchangeable. One (i think) is from a '78 and the other one is from a 1 ton with a tank door (year unknown)

Car'n'Guitars · 12-16-2012, 02:16 PM

Quote:

Originally Posted by willett

if it doesnt come with a tailgate or you want to use your old one make sure that the piviot points are the same, I have 2 boxes and the tailgates aren't interchangeable. One (i think) is from a '78 and the other one is from a 1 ton with a tank door (year unknown)

Mine doesn't have tailgate so I'll look at this one and see, should I try and find out what year the bed is?

Car'n'Guitars · 12-16-2012, 03:43 PM

Just got back from looking at the bed, decided I'm going to buy it. The guy offered up the whole set-up the bed, frame, axle, and gas tank and straps for $100.

whiskeydented · 12-16-2012, 04:17 PM

Quote:

Originally Posted by Car'n'Guitars

Just got back from looking at the bed, decided I'm going to buy it. The guy offered up the whole set-up the bed, frame, axle, and gas tank and straps for $100.

Is that the good or bad side?

Car'n'Guitars · 12-16-2012, 04:20 PM

Its the bad side, most of it is surface rust, I did check the integrity of the metal and it is fine, it will need wheel arches replaced but that's really it, for $100 in northern Indiana you can't really beat it.

68Timber · 12-16-2012, 04:55 PM

Sell the hubcaps and you'll get half your money back.

cory d · 12-16-2012, 04:58 PM

those hub caps are sweet

68Timber · 12-16-2012, 05:10 PM

Quote:

Originally Posted by cory d

those hub caps are sweet

I have one hanging on the wall of my man cave, but with the blue bowtie. Love those caps.

Car'n'Guitars · 12-16-2012, 05:11 PM

He cut the front off the frame so I don't get the front ones.

UKNOWME · 12-16-2012, 05:30 PM

Quote:

Originally Posted by Car'n'Guitars

He cut the front off the frame so I don't get the front ones.

So you didn't get the front half of the frame?
Posted via Mobile Device

Car'n'Guitars · 12-16-2012, 05:33 PM

Quote:

Originally Posted by UKNOWME

So you didn't get the front half of the frame?
Posted via Mobile Device

Yeah I only really need the bed he offered the rest because he didn't feel like taking the bed off the frame. I will ask about the front end though when I go get it.

UKNOWME · 12-16-2012, 05:43 PM

I would think you be ahead with the whole frame if possible. Maybe you could sell the frame and the wheel caps
Posted via Mobile Device
Posted via Mobile Device

Car'n'Guitars · 12-16-2012, 05:45 PM

I'm giving the frame to my friend to build a trailer for crazy 8 racing.

Wrecked1982 · 12-17-2012, 09:27 AM

at a 100$ if its not good trow it all to scrap metal youll probably have close to 100$ back nothing to loose here

*mrhino* · 12-17-2012, 04:50 PM

where did you find that, and do you need a gate?

Car'n'Guitars · 12-17-2012, 05:08 PM

Quote:

Originally Posted by mrhino

where did you find that, and do you need a gate?

Up in Union Michigan just over the state line right off of County Road 17. I believe its on Union Road. And it has a gate it's just down in the picture.

*mrhino* · 12-17-2012, 06:08 PM

thats a good deal if it aint to bad. and close to boot. fyi I have a good gate if you need one.

Car'n'Guitars · 12-17-2012, 06:32 PM

Yeah the floor is all solid the sides need a little work but way better than what I have now on my truck. It has nice supports under the floor, the bed needs small patches in the sides that are about a 1" by 1". And for the $100 I get the bed, gas tanks, and a 5 lug 12 bolt rear-end so I'm happy with it. I don't think it will need a tailgate, I moved it while I was there and it seemed to work fine and looked to be completely straight.

Car'n'Guitars · 12-20-2012, 10:51 PM

So a little update for everyone, I should be going Sunday at 2 in the afternoon to pick up these parts, that's if this snow storm isn't too bad. I will get pictures when it's here so you guys can get a better idea of it. So while I'm at it, what are some good ways to do a bed swap on our trucks?

notallthere · 12-20-2012, 11:10 PM

Ratchet straps crossed in the middle from the stake pockets and a cherry picker.

77c10 · 12-21-2012, 12:07 PM

Quote:

Originally Posted by Car'n'Guitars

So a little update for everyone, I should be going Sunday at 2 in the afternoon to pick up these parts, that's if this snow storm isn't too bad. I will get pictures when it's here so you guys can get a better idea of it. So while I'm at it, what are some good ways to do a bed swap on our trucks?

3 stout friends and a case of beer....

12-16-2012, 01:19 PM	#1
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Going to go look at a bed Alright in about 2 hours I'm going to go look at a bed for my truck, is there anything specific besides rust I should look for? Any specific areas I should be looking at for hidden damage or rust? __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

12-16-2012, 02:04 PM	#2
willett Another Day, Another Dollar Join Date: Nov 2008 Location: North Vancouver, BC Posts: 1,316	Re: Going to go look at a bed if it doesnt come with a tailgate or you want to use your old one make sure that the piviot points are the same, I have 2 boxes and the tailgates aren't interchangeable. One (i think) is from a '78 and the other one is from a 1 ton with a tank door (year unknown) __________________ -78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square"

12-16-2012, 03:43 PM	#4
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Going to go look at a bed Just got back from looking at the bed, decided I'm going to buy it. The guy offered up the whole set-up the bed, frame, axle, and gas tank and straps for $100. Attached Images __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

12-16-2012, 04:20 PM	#6
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Going to go look at a bed Its the bad side, most of it is surface rust, I did check the integrity of the metal and it is fine, it will need wheel arches replaced but that's really it, for $100 in northern Indiana you can't really beat it. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

12-16-2012, 04:55 PM	#7
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Going to go look at a bed Sell the hubcaps and you'll get half your money back. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

12-16-2012, 04:58 PM	#8
cory d Registered User Join Date: Dec 2011 Location: Arlington WA Posts: 1,728	Re: Going to go look at a bed those hub caps are sweet __________________ GMC C15 355 SM465 3.73 80 C10 cruiser build thread 79 short stepside crew cab. big and ugly. build thread

12-16-2012, 05:11 PM	#10
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Going to go look at a bed He cut the front off the frame so I don't get the front ones. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

12-16-2012, 05:43 PM	#13
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: Going to go look at a bed I would think you be ahead with the whole frame if possible. Maybe you could sell the frame and the wheel caps Posted via Mobile Device Posted via Mobile Device __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

12-16-2012, 05:45 PM	#14
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Going to go look at a bed I'm giving the frame to my friend to build a trailer for crazy 8 racing. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

12-17-2012, 09:27 AM	#15
Wrecked1982 Registered User Join Date: Feb 2011 Location: Cold Canada Posts: 310	Re: Going to go look at a bed at a 100$ if its not good trow it all to scrap metal youll probably have close to 100$ back nothing to loose here

12-17-2012, 04:50 PM	#16
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: Going to go look at a bed where did you find that, and do you need a gate?

12-17-2012, 06:08 PM	#18
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: Going to go look at a bed thats a good deal if it aint to bad. and close to boot. fyi I have a good gate if you need one.

12-17-2012, 06:32 PM	#19
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Going to go look at a bed Yeah the floor is all solid the sides need a little work but way better than what I have now on my truck. It has nice supports under the floor, the bed needs small patches in the sides that are about a 1" by 1". And for the $100 I get the bed, gas tanks, and a 5 lug 12 bolt rear-end so I'm happy with it. I don't think it will need a tailgate, I moved it while I was there and it seemed to work fine and looked to be completely straight. Attached Images __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

12-20-2012, 10:51 PM	#20
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Going to go look at a bed So a little update for everyone, I should be going Sunday at 2 in the afternoon to pick up these parts, that's if this snow storm isn't too bad. I will get pictures when it's here so you guys can get a better idea of it. So while I'm at it, what are some good ways to do a bed swap on our trucks? __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

12-20-2012, 11:10 PM	#21
notallthere Registered User Join Date: Nov 2011 Location: sarnia ontario canada Posts: 211	Re: Going to go look at a bed Ratchet straps crossed in the middle from the stake pockets and a cherry picker.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.