How about some pics of 67-72 Part II

[mud.man.rj]

Nice truck, running some nice rubber at the back too. Like the big block nothing compares.

[sanford&daughter]

Originally Posted by mud.man.rj

Nice truck, running some nice rubber at the back too. Like the big block nothing compares.

thanks mud.man the rear tires are 315/60/15... and i agree nothing compares to the power and sound of a big block

[mud.man.rj]

So are you fitting the 315's inside a stock wheel well. probably right just has a correct offset.

[sanford&daughter]

Originally Posted by mud.man.rj

So are you fitting the 315's inside a stock wheel well. probably right just has a correct offset.

Ya they are fitting in the stock tubs the truck is lowered quite a bit so they fit a little snug but they just clear
Posted via Mobile Device

[mud.man.rj]

So how much is it lowered, just wondering as working on a 72 with rear bags that will ride at 6" lowered and 8" sitting, so the 315's may fit width but profile may have to drop some, you said 60's i think right. Might be doing more work than I thought, haha.

[sanford&daughter]

Ya they are 60 series tires the truck is lowered 6.5 in the rear if I go much lower then they would be hitting on the outside wheel well (side wall bulge) you may have to do a mini tub and go with bigger back spacing if you plan on being 8 lower when air out
Posted via Mobile Device

[mud.man.rj]

Originally Posted by sanford&daughter

Ya they are 60 series tires the truck is lowered 6.5 in the rear if I go much lower then they would be hitting on the outside wheel well (side wall bulge) you may have to do a mini tub and go with bigger back spacing if you plan on being 8 lower when air out
Posted via Mobile Device

Well at least now because of yours I have a reference and does sound like no choice on the mini tub, more work if i go that route but maybe since the bed is a bit rough I could just raise the bed floor. have to look at that route also. I am sure the mini tub is less work haha. Any idea on your back spacing. Still have to buy rims.

[sanford&daughter]

Originally Posted by mud.man.rj

Well at least now because of yours I have a reference and does sound like no choice on the mini tub, more work if i go that route but maybe since the bed is a bit rough I could just raise the bed floor. have to look at that route also. I am sure the mini tub is less work haha. Any idea on your back spacing. Still have to buy rims.

I'm running a 4.5 back spacing but assuming you still have the stock 72 rearend you are probably need to go with a wheel with a tad more due to a 68 has about a 1 5/16 more narrow rearend than a 72
Posted via Mobile Device

[westbrookw]

[Mtodd84]

http://

Before construction


Almost ready for paint
Posted via Mobile Device

[Mtodd84]

http://

Almost ready for paint
Posted via Mobile Device

[RAWkreated71GMC]

My project...
Posted via Mobile Device

[ytnsimi]

Originally Posted by Longhorn321

Very Nice!!! I absolutly LOVE the color combination! You don't see too many trucks with that shade of yellow.

Thanks, I always liked the pale yellow also. I used the pale yellow from SPI. They stopped carrying it though.

A little before and after...

[Survivalist45]

Old picture, but just showing you what I drive, installed some new stuff today, will have pictures up tomorrow sometime.

[Mr Chevorlet]

A lot of beautiful trucks on here, Here's mine still in progress maybe by spring I will be able to finally pull it out of the shop. I cant wait to drive it down the road.

[wjr]

my 1 ton with a 8x10 bed.

[Rickys S/C Z28]

wow guy there are sooooo many nice rides on here. im have a deal worked out with a friend of a friend so i hope to have my self a 72 short box soon !

[SCHRUMGMC]

I may be getting a 71 short bed 3 speed

[HardKoreKustoms]

Sophia my 67 swb lots of work still to do


Posted via Mobile Device

[K20chevy]

Originally Posted by hula

Man, I wish I could just buy that off of you right now!

[ctpchevy]

some pics of my grandmothers truck i redid ...first pic was back when it was new on the ranch

[mud.man.rj]

That is one nice Grandmothers truck, glad you hung on to it.

[Chevybowtie]

Originally Posted by ctpchevy

some pics of my grandmothers truck i redid ...first pic was back when it was new on the ranch

What tire and lift setup is that? Looks good.

[Scott>72-GMC]

72 chevy parts truck
Posted via Mobile Device

[ctpchevy]

Originally Posted by Chevybowtie

What tire and lift setup is that? Looks good.

I think it's just a rancho kit .. 4 inch then I made a lol longer rear shackle for the front leafs .. It rides ok I even ran the soft ride leafs .. But it's a 3/4 ton truck so I think it is what it is lol
Posted via Mobile Device