KS Christmas BONANZA ALOT of 67-72 truck parts!! - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bcnya2** · 01-01-2013, 10:41 PM

Randy, do I need to buy an entire new set of BB alt. brackets or are they the same as early models. I purch the ones from you for 1970. Do you have the 3rd bracket (rod)?

thanks,
Greg

teeitup · 01-01-2013, 10:45 PM

Greg, the upper is a little different on a 72, sorry I don't have a rod for a 72 setup. Thanks Randy

**bcnya2** · 01-01-2013, 10:54 PM

no problem.......my fault I didnt ask......I just assumed 70-72 BB would have the same brackets. If you know anyone that has the upper and the rod please let me know........thanks, Greg

**bcnya2** · 01-01-2013, 10:55 PM

will everything still line up if I just kept these 2 alt. brackets, or am I going to run into problems? Greg

DBear · 01-01-2013, 10:57 PM

Randy...can u pm me ur # so i can call u about that front axle? Thanks again
Posted via Mobile Device

dirish · 01-02-2013, 07:33 AM

New to the forum, have 70 swb. Do you have front grill left?
Price to 37148 please. Thanks Daniel in Tn.
Posted via Mobile Device

teeitup · 01-02-2013, 09:24 AM

Greg, everything will line up

DBear, pm sent

dirish, Daniel, sorry sold the only 69-70 outer grill I had

Thanks Randy

BGrim · 01-02-2013, 10:52 AM

Randy,

I sent you a PM not sure if I did it right. Anyhoo, you should be getting the money order today or tomorrow.

Thanks!

teeitup · 01-02-2013, 02:05 PM

I'll let you know when it gets here, Thanks Randy

Rickey · 01-02-2013, 05:15 PM

Randy
I need on 24 the 4th picture, inlet air plenum valve, a/c vacuum canister and a/c actuator

*BAT* · 01-02-2013, 08:00 PM

Hey Randy, I'm going to pass on the headlight buckets for now. Thanks anyway!
Posted via Mobile Device

sixtysevengmc · 01-02-2013, 11:25 PM

Quote:

Originally Posted by teeitup

sixtysevengmc, the rims would be $160 shipped (I priced them to a guy in Tenn a couple weeks ago). the wheels do not accept hubcaps, no knubs on them. The 67 center dash piece is $32 shipped and I'll throw in standard 67 headlight and wiper knobs

I'll take all of it, and thank you for the knobs. I recall reading at the beginning of the thread you no longer accept PayPal, and prefer money orders, just PM me an address to send it too, and I'll get it out ASAP. i'm an OTR truck driver, so it'll be this weekend before I can mail it, if that's alright.

thanks
Posted via Mobile Device

teeitup · 01-03-2013, 09:47 AM

Rickey, I'll get pics tonight after work of those parts

BAT, No problem

sixtysevengmc, sounds fine $192 total, I'll send pm with info

Thanks Randy

rcm1958 · 01-03-2013, 09:47 AM

Still looking for a set of 6-lug rims for my '67 C-10. Any advice??

Reed

teeitup · 01-03-2013, 01:31 PM

Reed, I'm buying a stock 69 that I think has all the original wheels on it. I will have it here this weekend and can let you know. I'd need $60 plus shipping for them, and shipping to you would be, just guessing right now $60-80 probably. Thanks Randy

Hubscrub · 01-03-2013, 08:26 PM

Randy, mo is in the mail .thanks
Posted via Mobile Device

teeitup · 01-03-2013, 11:13 PM

I'll let you know when I get it in the mail, Thanks Randy

fastlane · 01-04-2013, 11:34 AM

Quote:

Originally Posted by teeitup

1) big block fan shroud, burnt some on bottom, wont be seen when mounted $30 plus shipping-sold
2) pic of burn spot-sold
3) tach/air pressure gauge setup $265 shipped-sold
4) 69-70 inner grills $40 each, no ship
5) glove box doors $55 shipped for one on left, $35 shipped for one in middle, and $32 shipped for green one

Question... The green one looks smaller, I assume its the camera angle. My 69 didn't come with a glove box.. Among other things! Is the stamped steel of all three the same, and any would accept a veneer? I plan on putting a veneer the same species as the bed on the dash panel and glove box. If the green one is the same as the other 2 I will take it.

teeitup · 01-04-2013, 01:36 PM

I'll have to look out there and see if its still there, I'll look later today. Thanks Randy

teeitup · 01-04-2013, 06:13 PM

Rickey, is this what your talking about

teeitup · 01-04-2013, 06:22 PM

fastlane, is this the green one your talking about, and yes all are same size. Thanks Randy

Rickey · 01-04-2013, 06:55 PM

Randy the I need the 2 items on the right and on 24, the first picture the vacuun canister that has the rubber hose attaches to it.

brian1971 · 01-04-2013, 08:07 PM

Hi Randy looking for a driver side sport mirror mounting bracket and 6 mirror screws
Thanks Brian
P.S. the fenders I got look great
Posted via Mobile Device

philB · 01-04-2013, 09:07 PM

yes sir, the blue headliner, hope it fits a "69 c10, need mprice and will you ship to 70037, do you have the chrome bands, and if you do how much.

philB · 01-04-2013, 09:09 PM

back again, need the plug for wiring to the cluster type gauge panel if you have one, cant ust the one in truck i just got.

01-01-2013, 10:41 PM	#426
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Randy, do I need to buy an entire new set of BB alt. brackets or are they the same as early models. I purch the ones from you for 1970. Do you have the 3rd bracket (rod)? thanks, Greg

01-01-2013, 10:45 PM	#427
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Greg, the upper is a little different on a 72, sorry I don't have a rod for a 72 setup. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-01-2013, 10:54 PM	#428
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: Christmas BONANZA ALOT of 67-72 truck parts!! no problem.......my fault I didnt ask......I just assumed 70-72 BB would have the same brackets. If you know anyone that has the upper and the rod please let me know........thanks, Greg

01-01-2013, 10:55 PM	#429
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: Christmas BONANZA ALOT of 67-72 truck parts!! will everything still line up if I just kept these 2 alt. brackets, or am I going to run into problems? Greg

01-01-2013, 10:57 PM	#430
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 867	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Randy...can u pm me ur # so i can call u about that front axle? Thanks again Posted via Mobile Device

01-02-2013, 07:33 AM	#431
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: Christmas BONANZA ALOT of 67-72 truck parts!! New to the forum, have 70 swb. Do you have front grill left? Price to 37148 please. Thanks Daniel in Tn. Posted via Mobile Device

01-02-2013, 09:24 AM	#432
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Greg, everything will line up DBear, pm sent dirish, Daniel, sorry sold the only 69-70 outer grill I had Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-02-2013, 10:52 AM	#433
BGrim Registered User Join Date: Dec 2012 Location: Mustang, OK Posts: 4	Clutch linkage Randy, I sent you a PM not sure if I did it right. Anyhoo, you should be getting the money order today or tomorrow. Thanks!

01-02-2013, 02:05 PM	#434
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! I'll let you know when it gets here, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-02-2013, 05:15 PM	#435
Rickey Registered User Join Date: Jun 2007 Location: Kaufman TX Posts: 160	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Randy I need on 24 the 4th picture, inlet air plenum valve, a/c vacuum canister and a/c actuator

01-02-2013, 08:00 PM	#436
BAT Account Suspended Join Date: Oct 2012 Location: Mt. Prospect IL Posts: 482	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Hey Randy, I'm going to pass on the headlight buckets for now. Thanks anyway! Posted via Mobile Device

01-03-2013, 09:47 AM	#438
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Rickey, I'll get pics tonight after work of those parts BAT, No problem sixtysevengmc, sounds fine $192 total, I'll send pm with info Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-03-2013, 09:47 AM	#439
rcm1958 Registered User Join Date: Dec 2012 Location: Delray Beach, FL Posts: 56	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Still looking for a set of 6-lug rims for my '67 C-10. Any advice?? Reed

01-03-2013, 01:31 PM	#440
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Reed, I'm buying a stock 69 that I think has all the original wheels on it. I will have it here this weekend and can let you know. I'd need $60 plus shipping for them, and shipping to you would be, just guessing right now $60-80 probably. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-03-2013, 08:26 PM	#441
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Randy, mo is in the mail .thanks Posted via Mobile Device __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14



Register or Log In To remove these advertisements.

01-03-2013, 11:13 PM	#442
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! I'll let you know when I get it in the mail, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-04-2013, 01:36 PM	#444
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! I'll have to look out there and see if its still there, I'll look later today. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-04-2013, 06:13 PM	#445
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Rickey, is this what your talking about Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-04-2013, 06:22 PM	#446
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! fastlane, is this the green one your talking about, and yes all are same size. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-04-2013, 06:55 PM	#447
Rickey Registered User Join Date: Jun 2007 Location: Kaufman TX Posts: 160	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Randy the I need the 2 items on the right and on 24, the first picture the vacuun canister that has the rubber hose attaches to it.

01-04-2013, 08:07 PM	#448
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Hi Randy looking for a driver side sport mirror mounting bracket and 6 mirror screws Thanks Brian P.S. the fenders I got look great Posted via Mobile Device __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

01-04-2013, 09:07 PM	#449
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: Christmas BONANZA ALOT of 67-72 truck parts!! yes sir, the blue headliner, hope it fits a "69 c10, need mprice and will you ship to 70037, do you have the chrome bands, and if you do how much.

01-04-2013, 09:09 PM	#450
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: Christmas BONANZA ALOT of 67-72 truck parts!! back again, need the plug for wiring to the cluster type gauge panel if you have one, cant ust the one in truck i just got.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.