01-03-2013, 11:50 PM | #1 |
Registered User
Join Date: Feb 2011
Location: Richland,wa
Posts: 95
|
Welder safety
I'm teaching myself to be a body man. I am going to replace my rockers on 72 c10. Do I have to be concerned about the gas tank, since it is so close to where I will be welding, is it going to blow up?
Posted via Mobile Device |
01-04-2013, 12:12 AM | #2 |
Registered User
Join Date: Dec 1999
Location: Mid NE USA
Posts: 2,212
|
Re: Welder safety
No it will not blow up. If the valve gets somehow knocked off there is a lot of pressure in there.
I use C25 which is Carbon Dioxide and Argon which are non combustible. They are used to shield the weld. Ron
__________________
Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson |
01-04-2013, 12:44 AM | #3 |
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Re: Welder safety
I think he meant the gasoline in the tank not the gas in the cylinder.
If the truck is going to be off the road while you do it I would remove the gas tank simply because its easy to do and the hoses are usually rotted or close to it |
01-04-2013, 01:15 AM | #4 |
Registered User
Join Date: Apr 2011
Location: richmond, va
Posts: 140
|
Re: Welder safety
I'd say if you're willing/able to tackle the sheetmetal work on your truck then you are more then capable of pulling the gas tank out before hand. it's only a hand full of bolts and a couple wires/hoses. not to be a downer, but you might come across more rot to fix under/behind the tank.
|
01-04-2013, 06:07 AM | #5 |
Registered User
Join Date: Dec 1999
Location: Mid NE USA
Posts: 2,212
|
Re: Welder safety
If only I could read.
Ron Posted via Mobile Device
__________________
Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson |
01-04-2013, 11:46 AM | #6 |
Registered User
Join Date: Aug 2012
Location: On the banks of the Clackamas River, Eagle CreeK Oregon
Posts: 387
|
Re: Welder safety
When you pull your fuel tank, be sure to remove it from the area your welding in. It is truly amazing how far a welding spark can travel on the ground. Remember it’s the fumes that create a high percentage of explosions.And why your tank is out do not miss a perfect opportunity to clean the scale/crud out of your tank.
I have a 79’ K-30 w/dual tanks. The first thing on my list is to pull both tanks, clean them out & replace all rubber components. YouTube has a few blurbs on ways in which to accomplish this task |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|