How do door poppers work? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TIMSPEED · 11-02-2003, 03:15 AM

if I wanted to shave my handles and put door poppers on. How hard would it be? How exactly do they open the door? Do they mount next to the factory latch, then pop it off the striker-bolt, then you can open the door?

**N2TRUX** · 11-02-2003, 10:10 AM

"Door Poppers" are just 12v actuators, or coils with a plunger in the middle. When you apply 12v they create a magnetic field that pulls the metal plunger inside the coil.

It works under the same principal as a power door lock. The plunger is hooked to a rod that pulls your door latch mechanism just like your door handle did before.

It depends on the application as to how they are mounted, and connected to the latch mechanism. I have seen a washer welded to the stock linkage, a cable hooked to the stock linkage, and many different custom set ups too.

It takes some fab skills, but it's not "too" hard....

BaggedC10 · 11-02-2003, 01:35 PM

Custom Classic (A "Preferred Vendor" on FSC) offers a kit for our trucks that uses the stock door latch.

I am going to upgrade to this kit soon.

http://www.customclassic.com/products/shave/ultra.htm

11-02-2003, 03:15 AM	#1
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	How do door poppers work? if I wanted to shave my handles and put door poppers on. How hard would it be? How exactly do they open the door? Do they mount next to the factory latch, then pop it off the striker-bolt, then you can open the door? __________________ I have a few cars... See Them Here

11-02-2003, 01:35 PM	#3
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Custom Classic (A "Preferred Vendor" on FSC) offers a kit for our trucks that uses the stock door latch. I am going to upgrade to this kit soon. http://www.customclassic.com/products/shave/ultra.htm __________________ 2001 Silverado bagged on 22's. Sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-02-2003, 10:10 AM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	"Door Poppers" are just 12v actuators, or coils with a plunger in the middle. When you apply 12v they create a magnetic field that pulls the metal plunger inside the coil. It works under the same principal as a power door lock. The plunger is hooked to a rod that pulls your door latch mechanism just like your door handle did before. It depends on the application as to how they are mounted, and connected to the latch mechanism. I have seen a washer welded to the stock linkage, a cable hooked to the stock linkage, and many different custom set ups too. It takes some fab skills, but it's not "too" hard....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.