carpet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dwjack · 11-02-2003, 11:34 AM

I need to buy new carpet for my 84 C10. I was going to go with NPI but have read about it being too short and not fitting right. Also read that LMC's suck. Any suggestions on who to buy from?

**swervin ervin** · 11-02-2003, 12:40 PM

I have Nifty Products (NPI) carpet in my truck that I bought from JC Whitney. Fits like a glove. I used the full coverage carpet.

kevhill85 · 11-02-2003, 02:25 PM

i use lmc . it work just fine for my truck .

Grey 87 · 11-10-2003, 01:39 AM

I used the same stuff swervin did. Fantastic fit, no complaints. Before I laid it though, I sprayed a couple coats of sound dampener on my floor and firewall. Really quieted it down in the cab.

Jonboy · 11-10-2003, 01:53 PM

does anyone have the lower door carpet set from LMC or ACC? How do they fit? I need to finish my interior, so I need some opinions.

Grey 87 · 11-10-2003, 01:59 PM

I got that for my 87 from JC whitney at the same time I got my carpet. I wanted to be sure the two shades of gray matched.

Great fit, no complaints!

ElGracho · 11-10-2003, 09:01 PM

I have a set of the lower door carpets from ACC. Nice, but you will have to reuse the stainless strip that was on your others if you want it and the door vent isn't exactly the same as original.

dwjack · 11-13-2003, 11:20 PM

Well I got my carpet kit today, I decided to get the NPI one from Summit. It looks nice but on the hump over the transmission it is too big and buldges up. Seems like if I try to glue it down it will get folds. Has anyone else had this problem, the 4wd kit says it has a bigger hump but unless they put the wrong kit in the box the part number is right for my truck. Thought that maybe I could buy some extra padding and try to bring it up a little closer but I still think it would be too big. Any thoughts?

**swervin ervin** · 11-14-2003, 12:06 AM

The NPI I got from JC Whitney fit perfect. No problems with the hump either.

dwjack · 11-14-2003, 12:12 AM

I am beginning to think that it is the 4wd carpet and was boxed wrong.

Grey 87 · 11-14-2003, 12:36 AM

I had the same problem. Truck was not originally a standard so I had no hump. When I ordered, without thinking I checked standard transmission, and my carpet showed up with room for a hump. I just went to the junkyard, unbolted one, and bolted it up under my carpet. No more problem.

kballan · 11-14-2003, 02:27 AM

I ordered mine factory GM. That way you KNOW that it'll be a proper fit!

*1FaastC10* · 11-14-2003, 02:52 AM

dwjack, welcome to the board! where at in Indiana are you?

dwjack · 11-20-2003, 02:31 AM

I'm in Lafayette for now.

11-02-2003, 11:34 AM	#1
dwjack Registered User Join Date: Sep 2003 Location: Alaska Posts: 35	carpet I need to buy new carpet for my 84 C10. I was going to go with NPI but have read about it being too short and not fitting right. Also read that LMC's suck. Any suggestions on who to buy from?

11-02-2003, 12:40 PM	#2
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	I have Nifty Products (NPI) carpet in my truck that I bought from JC Whitney. Fits like a glove. I used the full coverage carpet. __________________ Mike 1985 Chevy C-10

11-02-2003, 02:25 PM	#3
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i use lmc . it work just fine for my truck . __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

11-10-2003, 01:39 AM	#4
Grey 87 Registered User Join Date: Aug 2003 Location: Texas Posts: 23	I used the same stuff swervin did. Fantastic fit, no complaints. Before I laid it though, I sprayed a couple coats of sound dampener on my floor and firewall. Really quieted it down in the cab. __________________ 87 SWB Silverado 84 LWB Custom Deluxe

11-10-2003, 01:53 PM	#5
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	does anyone have the lower door carpet set from LMC or ACC? How do they fit? I need to finish my interior, so I need some opinions. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-10-2003, 01:59 PM	#6
Grey 87 Registered User Join Date: Aug 2003 Location: Texas Posts: 23	I got that for my 87 from JC whitney at the same time I got my carpet. I wanted to be sure the two shades of gray matched. Great fit, no complaints! __________________ 87 SWB Silverado 84 LWB Custom Deluxe

11-10-2003, 09:01 PM	#7
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	I have a set of the lower door carpets from ACC. Nice, but you will have to reuse the stainless strip that was on your others if you want it and the door vent isn't exactly the same as original. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

11-13-2003, 11:20 PM	#8
dwjack Registered User Join Date: Sep 2003 Location: Alaska Posts: 35	Well I got my carpet kit today, I decided to get the NPI one from Summit. It looks nice but on the hump over the transmission it is too big and buldges up. Seems like if I try to glue it down it will get folds. Has anyone else had this problem, the 4wd kit says it has a bigger hump but unless they put the wrong kit in the box the part number is right for my truck. Thought that maybe I could buy some extra padding and try to bring it up a little closer but I still think it would be too big. Any thoughts?

11-14-2003, 12:06 AM	#9
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	The NPI I got from JC Whitney fit perfect. No problems with the hump either. __________________ Mike 1985 Chevy C-10

11-14-2003, 12:12 AM	#10
dwjack Registered User Join Date: Sep 2003 Location: Alaska Posts: 35	I am beginning to think that it is the 4wd carpet and was boxed wrong. __________________ 1984 Silverado C10 GM Goodwrench 350 Edelbrock Intake/Carb Hedman Hedders 700R4 Transmission 12 Bolt out of an 81 275/60/15 Centerlines

11-14-2003, 12:36 AM	#11
Grey 87 Registered User Join Date: Aug 2003 Location: Texas Posts: 23	I had the same problem. Truck was not originally a standard so I had no hump. When I ordered, without thinking I checked standard transmission, and my carpet showed up with room for a hump. I just went to the junkyard, unbolted one, and bolted it up under my carpet. No more problem. __________________ 87 SWB Silverado 84 LWB Custom Deluxe

11-14-2003, 02:27 AM	#12
kballan Registered User Join Date: Jun 2003 Location: Fort Frances, Ontario, Canada Posts: 373	I ordered mine factory GM. That way you KNOW that it'll be a proper fit! __________________ Kent Ballan ANY MAN CAN BUILD A TRUCK, BUT IT TAKES A REAL MAN TO CUT ONE UP!

11-14-2003, 02:52 AM	#13
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	dwjack, welcome to the board! where at in Indiana are you?

11-20-2003, 02:31 AM	#14
dwjack Registered User Join Date: Sep 2003 Location: Alaska Posts: 35	I'm in Lafayette for now. __________________ 1984 Silverado C10 GM Goodwrench 350 Edelbrock Intake/Carb Hedman Hedders 700R4 Transmission 12 Bolt out of an 81 275/60/15 Centerlines

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.