Power Steeering Brackets and Pulleys for 250 Engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JJR · 11-10-2003, 11:01 AM

Here are the power steering pump brackets and water pump and crank pulleys for a 250 engine. I got these off a 74 Nova. They will work on our trucks. They will not work on 1975 and later 250’s with an integrated head. The Nova water pump pulleys are smaller in diameter than the ones on our trucks but will work fine. I have mentioned before, I was going to convert to PS but I got a NOS manual box off e-bay for cheap and decided to keep manual steering so I would like to sell these. They have been sandblasted and painted (not a show quality finish). I would like to get $65 plus shipping.

**Tim Christian** · 11-10-2003, 02:55 PM

I am interested will pm you when I get home. At work right now. Thanks

BondoBeast · 11-10-2003, 06:32 PM

If Tim does not take them count me in. I need them badly!!! An altenator bracket would be useful to if you have one.

**Tim Christian** · 11-10-2003, 08:22 PM

Hey BondoBeast, Go ahead. I was just going to buy them to resale.

JJR · 11-10-2003, 10:28 PM

It's yours if you want it BondoBeast. I will be going to the junkyard tomorrow so I should be able to find a lower alt bracket (I am assumming this is the bracket your are talking about because the ps bracket serves as the upper alt bracket). Let me know if you still want it and let me know your Zip so I can figure shipping cost. I would quess shipping will be around $15 to ship coast-to-coast UPS.

JJR · 11-13-2003, 11:30 AM

My trip to the junkyard yeilded a PS pump pulley (press on type) and most of the little things (lower alt bracket, bolts and such). I had to pay $8.50 for the pulley so I would like to recover the cost so the price for everthing will be $73.50 plus shipping. I have already sandblasted and painted the pulley. All you will need to get is a pump for a 74 Nova with a 250 at your local parts store and you will be set. I have sent a PM to BondoBeast but have not heard back. I am holding it for him unless he does not want it and I will update the post again.

JJR · 12-15-2003, 09:39 PM

Buyer back out. I still have them for sell for $73.50 plus shipping. All you will need is a mid 70's style pump (press-on pulley) and a PS box and lines and you are set. The perfect last minute Christmas gift.

Brad · 12-16-2003, 04:51 AM

Pretty fair price. These don't grow on trees. If I had the cash, I'd buy it for re-sale. This is a good seller folks!

chopper · 12-18-2003, 10:42 AM

Quote:

Originally posted by JJR
Buyer back out. I still have them for sell for $73.50 plus shipping. All you will need is a mid 70's style pump (press-on pulley) and a PS box and lines and you are set. The perfect last minute Christmas gift.

Hello everyone, first time AWSOME,
I'll take em send me a PM with all the info shipping to OH. 45833
chopper@wcoil.com

JJR · 12-18-2003, 10:58 AM

Looks like they are sold. If it falls thru I will let you know. I will try to get ahold of another set.

chopper · 12-28-2003, 12:52 PM

JJR, Have you had time to go to the junkyard yet? Need brackets bad.

chopper@wcoil.com

JJR · 12-28-2003, 08:27 PM

I have gone once. I did get a double groove water pump pulley but someone beat me to the brackets. I hope to go again later this week and get the pump pulley (I did not have my puller with me) and see what new stuff has shown up.

rogf4 · 12-30-2003, 01:07 AM

I am looking for a set of bracket's and pulleys for 77 model 250 6 cyl chev. truck. Will these work? Are they sold? Got a line on any more?

JJR · 12-30-2003, 12:07 PM

The ones in the picture are sold. Does your 77 model have an integrated head? The ones in the picture are for non-integrated head. They changed to integrated heads around 75/76. The PS set-up for later models with integrated heads are easier to find in the junkyard. They are pretty much identical with the exeption of the bracket that bolts to the head. I will look for both types the next time I make it to the junkyard.

rogf4 · 12-30-2003, 09:52 PM

It does not have the intergrated head these type brackets should work

11-10-2003, 11:01 AM	#1
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Power Steeering Brackets and Pulleys for 250 Engine Here are the power steering pump brackets and water pump and crank pulleys for a 250 engine. I got these off a 74 Nova. They will work on our trucks. They will not work on 1975 and later 250’s with an integrated head. The Nova water pump pulleys are smaller in diameter than the ones on our trucks but will work fine. I have mentioned before, I was going to convert to PS but I got a NOS manual box off e-bay for cheap and decided to keep manual steering so I would like to sell these. They have been sandblasted and painted (not a show quality finish). I would like to get $65 plus shipping. Attached Images __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

11-10-2003, 10:28 PM	#5
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	It's yours if you want it BondoBeast. I will be going to the junkyard tomorrow so I should be able to find a lower alt bracket (I am assumming this is the bracket your are talking about because the ps bracket serves as the upper alt bracket). Let me know if you still want it and let me know your Zip so I can figure shipping cost. I would quess shipping will be around $15 to ship coast-to-coast UPS. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

11-13-2003, 11:30 AM	#6
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	My trip to the junkyard yeilded a PS pump pulley (press on type) and most of the little things (lower alt bracket, bolts and such). I had to pay $8.50 for the pulley so I would like to recover the cost so the price for everthing will be $73.50 plus shipping. I have already sandblasted and painted the pulley. All you will need to get is a pump for a 74 Nova with a 250 at your local parts store and you will be set. I have sent a PM to BondoBeast but have not heard back. I am holding it for him unless he does not want it and I will update the post again. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

12-15-2003, 09:39 PM	#7
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Buyer back out. I still have them for sell for $73.50 plus shipping. All you will need is a mid 70's style pump (press-on pulley) and a PS box and lines and you are set. The perfect last minute Christmas gift. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

12-16-2003, 04:51 AM	#8
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Pretty fair price. These don't grow on trees. If I had the cash, I'd buy it for re-sale. This is a good seller folks! __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

11-10-2003, 02:55 PM	#2
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I am interested will pm you when I get home. At work right now. Thanks

11-10-2003, 06:32 PM	#3
BondoBeast Registered User Join Date: Jun 2001 Location: Portland,Or Posts: 20	If Tim does not take them count me in. I need them badly!!! An altenator bracket would be useful to if you have one.

11-10-2003, 08:22 PM	#4
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Hey BondoBeast, Go ahead. I was just going to buy them to resale.

12-18-2003, 10:58 AM	#10
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Looks like they are sold. If it falls thru I will let you know. I will try to get ahold of another set. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

12-28-2003, 12:52 PM	#11
chopper Registered User Join Date: Dec 2003 Location: Delphos OH. Posts: 13	Wanted 250 Power Steering Brackets JJR, Have you had time to go to the junkyard yet? Need brackets bad. chopper@wcoil.com

12-28-2003, 08:27 PM	#12
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	I have gone once. I did get a double groove water pump pulley but someone beat me to the brackets. I hope to go again later this week and get the pump pulley (I did not have my puller with me) and see what new stuff has shown up. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

12-30-2003, 01:07 AM	#13
rogf4 Registered User Join Date: Nov 2003 Location: whitesburg,Tn Posts: 223	I am looking for a set of bracket's and pulleys for 77 model 250 6 cyl chev. truck. Will these work? Are they sold? Got a line on any more?

12-30-2003, 12:07 PM	#14
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	The ones in the picture are sold. Does your 77 model have an integrated head? The ones in the picture are for non-integrated head. They changed to integrated heads around 75/76. The PS set-up for later models with integrated heads are easier to find in the junkyard. They are pretty much identical with the exeption of the bracket that bolts to the head. I will look for both types the next time I make it to the junkyard. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

12-30-2003, 09:52 PM	#15
rogf4 Registered User Join Date: Nov 2003 Location: whitesburg,Tn Posts: 223	It does not have the intergrated head these type brackets should work

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.