Bolts to hold 4 x 4 rally wheel caps on - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sequoyah · 02-24-2013, 06:42 PM

I found some at Home Depot that look damn close to the original ones. Same thread pitch and everything. It might not be a NOS bolt that will win you 100 point restoration prizes, but it looks good and is cheap and is available to most everybody. The only downside to these is that they are made in Taiwan. Hope this helps somebody out who is looking for these.

*Home Depot Item #68268 (made by Crown Bolt)

*Serrated Flange Bolt

*5/16"-18 x 3/4"

*Coarse

*Zinc Plated

*.67 cents per bolt

02-24-2013, 06:42 PM	#1
Sequoyah so easy a caveman can do it... Join Date: May 2006 Location: Albuquerque, NM Posts: 419	Bolts to hold 4 x 4 rally wheel caps on I found some at Home Depot that look damn close to the original ones. Same thread pitch and everything. It might not be a NOS bolt that will win you 100 point restoration prizes, but it looks good and is cheap and is available to most everybody. The only downside to these is that they are made in Taiwan. Hope this helps somebody out who is looking for these. Home Depot Item #68268 (made by Crown Bolt) Serrated Flange Bolt 5/16"-18 x 3/4" Coarse Zinc Plated .67 cents per bolt Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=242380

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.