I need a Vortec intake manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ckhd · 11-12-2003, 12:00 PM

I don't know if it makes a difference, but it's for a '96 K10 burb with a 350.

alf4444 · 11-13-2003, 11:40 AM

Ebay or the stealership. I tried to find an aftermarket performance one when I replaced my intake gasket and no one makes one. I have seen them go for as low as 40 on ebay though.

bpmcgee · 11-13-2003, 12:30 PM

Edelbrock makes both the Performer and Performer RPM in an 8-bolt Vortec pattern.

Brian

alf4444 · 11-13-2003, 12:35 PM

Those are intakes for vortec conversion engines, like when you put vortec heads on a 95 or older engine. They are carberated (spell check thet someone) or for TBI not fuel injection. I guess I should reword my statement noone makes a replacement intake for the 96 up vortec engines. And yes after talking to jegs and summit I called edelbrock and holley and they do not manufacture a replacement intake for the vortec engines.

ckhd · 11-13-2003, 03:37 PM

Yeah, I need the stock one. My brother's is cracked in his 'burb.

GSXMEN · 11-19-2003, 11:49 AM

You might try www.goautocenter.com - they used to have factory take-offs for $250. That even included the FI setup.

11-12-2003, 12:00 PM	#1
ckhd Registered User Join Date: Oct 2000 Location: St. Johns, Arizona Posts: 2,660	I need a Vortec intake manifold I don't know if it makes a difference, but it's for a '96 K10 burb with a 350. __________________ my 2¢ - t.i.o.l.i. Bowen 1968 K20 fleet 1969 K10 swb fleet 1972 K10 Suburban 1972 C10 lwb step 1992 K1500 'burb 1995 K2500 'burb 1997 C1500 'burb 1999 K1500 2000 K1500 'burb Why do I own so many Suburbans?

11-13-2003, 11:40 AM	#2
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Ebay or the stealership. I tried to find an aftermarket performance one when I replaced my intake gasket and no one makes one. I have seen them go for as low as 40 on ebay though. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

11-13-2003, 12:35 PM	#4
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Those are intakes for vortec conversion engines, like when you put vortec heads on a 95 or older engine. They are carberated (spell check thet someone) or for TBI not fuel injection. I guess I should reword my statement noone makes a replacement intake for the 96 up vortec engines. And yes after talking to jegs and summit I called edelbrock and holley and they do not manufacture a replacement intake for the vortec engines. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

11-13-2003, 03:37 PM	#5
ckhd Registered User Join Date: Oct 2000 Location: St. Johns, Arizona Posts: 2,660	Yeah, I need the stock one. My brother's is cracked in his 'burb. __________________ my 2¢ - t.i.o.l.i. Bowen 1968 K20 fleet 1969 K10 swb fleet 1972 K10 Suburban 1972 C10 lwb step 1992 K1500 'burb 1995 K2500 'burb 1997 C1500 'burb 1999 K1500 2000 K1500 'burb Why do I own so many Suburbans?

11-19-2003, 11:49 AM	#6
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	You might try www.goautocenter.com - they used to have factory take-offs for $250. That even included the FI setup. __________________ Scott

11-13-2003, 12:30 PM	#3
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Edelbrock makes both the Performer and Performer RPM in an 8-bolt Vortec pattern. Brian

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.