72 2wd Blazer Airride & 20's - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rotadyne · 11-17-2003, 06:04 PM

Your truck looks really nice. But I already have my '68 SWB and could use the money.

Thanks
Dave

trinic · 11-17-2003, 06:46 PM

thought i'd try. wish you luck with the sell...

**N2TRUX** · 11-18-2003, 12:34 AM

trinic,
What ya asking for your truck?

renntec99 · 11-18-2003, 02:25 AM

Would you happen to have any pics of the engine, bag set ups and any other pics? Also how many miles are on the truck? If you do can you please send them to Renntec99@aol.com.

rotadyne · 11-18-2003, 11:21 AM

I am working in Kansas City until Friday. When I get home Friday nite, I will take some pics. Sorry about the delay.

Dave

**CPNE** · 11-18-2003, 11:34 AM

I'm interested and am wondering what it would take to bring it back to near "stock". It looks like a good original to start with. Mostly interested in putting back factory suspension components and OE 15 inch steel wheels. How much of the original pieces are still with the truck and how much undercarriage surgery was there to get it's current stance?

Also is truck in Indiana or where is it?

jugernot · 11-18-2003, 03:12 PM

Really nice truck. only if I did not already have a project. I would be tempted. reasonable price too.

Smooth68 · 11-18-2003, 03:23 PM

CPNE - Let me know if you get the Blazer and I'll take all that aftermarket "junk" off your hands

**CPNE** · 11-18-2003, 03:27 PM

Quote:

Originally posted by Smooth68
CPNE - Let me know if you get the Blazer and I'll take all that aftermarket "junk" off your hands

OK, but I wouldn't classify it as junk (or price it that way either)

(and to think I was just going to torch it off

)

Smooth68 · 11-18-2003, 04:35 PM

Can't blame a guy for trying...

I really do like that wheel/tire combo - has a nice stance.

**lolife99** · 11-18-2003, 11:44 PM

PM'd you.

rotadyne · 11-19-2003, 09:13 AM

I still have the original spindles and coils if needed. I believe I still have the frame sections I cut out when I c-notched it. I gave the original rear end and panhard bar to a buddy: I think I can get it back. I trimmed the bump stops back on the lower a-arms. Everything could be reversed to stock.

Thanks
Dave

rotadyne · 11-19-2003, 09:16 AM

Oh yeah,

Truck is in Indiana, but I have been working in KC and traveling back and forth. Could possibly deliver. I have met some cool board members while working in KC.

meathead95 · 11-19-2003, 11:33 AM

cpne i have a stock 72 2wd blazer ill swap yah my parts for the lowering parts :-)

**lolife99** · 11-19-2003, 10:03 PM

I will send you some pics of the '99,... just need your e-mail address. Thanks.

mainman22 · 11-19-2003, 10:51 PM

do u have a # where i can reach u AND can u send me all the pics inside and out and under hood please

tomsC10R · 11-20-2003, 03:21 AM

rotadyne,

Beautiful Blazer!! Movin this to the top

I wish I could afford it but I can't

Besides that, I put a down payment on a 68 LWB before I saw yours. I would like to like to use the same type of wheel you did in the rear. The truck already has a pretty narrow 9 inch rear in it.

Could you tell me, especially for your friends 68... Did you have to widen the rear wheel tubs? Or did you have to use wider aftermarket wheel tubs? Those are 20x10 in the rear right? Would I have to worry about rubbing without changing wheel tubs with a steel spring 4" front and 6" rear ECE drop? Oh yeah, any good place to order the wheels from, $$ wise?

Sorry for getting off topic. Goodluck selling it!!

Thanks,
Tom

Roberty · 11-22-2003, 12:04 AM

Up to the top again!!

**lolife99** · 11-22-2003, 11:10 PM

ttt

Hotrod70C10 · 11-23-2003, 12:39 AM

I love the blazer! I saw in it a recent magazine too. I don't mean to bother you but could you put up some pics of that sweet looking 57' you've got there in the background?

Roberty · 11-23-2003, 12:41 AM

Quote:

Originally posted by Hotrod70C10
I love the blazer! I saw in it a recent magazine too.

What magazine was it in?

PrimeredThunder · 11-23-2003, 05:09 AM

It is in the December 2003 issue of Street Trucks, and also Truckin in the back.

rotadyne · 11-23-2003, 11:29 AM

It was also in the October issue of Classic Trucks for the Indy Goodguys coverage. I only took it to two shows. It was a big hit.

renntec99 · 11-23-2003, 10:21 PM

Is it sold yet? If not please email me all the pics that you can to renntec99@aol.com

rotadyne · 11-24-2003, 01:39 AM

Not sold yet

It is pouring rain here and getting ready to snow. I will try to get it out of the garage tommorow to take some more pics and post.

11-17-2003, 06:04 PM	#26
rotadyne Registered User Join Date: Jul 2002 Location: Laporte, In Posts: 33	67 truck Your truck looks really nice. But I already have my '68 SWB and could use the money. Thanks Dave

11-17-2003, 06:46 PM	#27
trinic Registered User Join Date: Aug 2002 Location: Wide awake Wylie (North Texas) Posts: 322	thx thought i'd try. wish you luck with the sell...

11-18-2003, 12:34 AM	#28
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	trinic, What ya asking for your truck? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-18-2003, 11:21 AM	#30
rotadyne Registered User Join Date: Jul 2002 Location: Laporte, In Posts: 33	pics I am working in Kansas City until Friday. When I get home Friday nite, I will take some pics. Sorry about the delay. Dave

11-18-2003, 11:34 AM	#31
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	I'll probably take a lot of flack for this but... I'm interested and am wondering what it would take to bring it back to near "stock". It looks like a good original to start with. Mostly interested in putting back factory suspension components and OE 15 inch steel wheels. How much of the original pieces are still with the truck and how much undercarriage surgery was there to get it's current stance? Also is truck in Indiana or where is it? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

11-18-2003, 02:25 AM	#29
renntec99 Registered User Join Date: Nov 2003 Posts: 2	Would you happen to have any pics of the engine, bag set ups and any other pics? Also how many miles are on the truck? If you do can you please send them to Renntec99@aol.com.

11-18-2003, 03:12 PM	#32
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Really nice truck. only if I did not already have a project. I would be tempted. reasonable price too.

11-18-2003, 03:23 PM	#33
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	CPNE - Let me know if you get the Blazer and I'll take all that aftermarket "junk" off your hands __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

11-18-2003, 04:35 PM	#35
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	Can't blame a guy for trying... I really do like that wheel/tire combo - has a nice stance. __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

11-18-2003, 11:44 PM	#36
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	AM interested! PM'd you.

11-19-2003, 09:13 AM	#37
rotadyne Registered User Join Date: Jul 2002 Location: Laporte, In Posts: 33	CPNE I still have the original spindles and coils if needed. I believe I still have the frame sections I cut out when I c-notched it. I gave the original rear end and panhard bar to a buddy: I think I can get it back. I trimmed the bump stops back on the lower a-arms. Everything could be reversed to stock. Thanks Dave

11-19-2003, 09:16 AM	#38
rotadyne Registered User Join Date: Jul 2002 Location: Laporte, In Posts: 33	CPNE Oh yeah, Truck is in Indiana, but I have been working in KC and traveling back and forth. Could possibly deliver. I have met some cool board members while working in KC.

11-19-2003, 11:33 AM	#39
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	cpne i have a stock 72 2wd blazer ill swap yah my parts for the lowering parts :-) __________________ 72 2wd blazer 72 swb 4x4

11-19-2003, 10:03 PM	#40
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	need e-mail address I will send you some pics of the '99,... just need your e-mail address. Thanks.

11-19-2003, 10:51 PM	#41
mainman22 Registered User Join Date: Feb 2001 Location: bend,oregon USA Posts: 90	phone # ? do u have a # where i can reach u AND can u send me all the pics inside and out and under hood please



Register or Log In To remove these advertisements.

11-20-2003, 03:21 AM	#42
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	rotadyne, Beautiful Blazer!! Movin this to the top I wish I could afford it but I can't Besides that, I put a down payment on a 68 LWB before I saw yours. I would like to like to use the same type of wheel you did in the rear. The truck already has a pretty narrow 9 inch rear in it. Could you tell me, especially for your friends 68... Did you have to widen the rear wheel tubs? Or did you have to use wider aftermarket wheel tubs? Those are 20x10 in the rear right? Would I have to worry about rubbing without changing wheel tubs with a steel spring 4" front and 6" rear ECE drop? Oh yeah, any good place to order the wheels from, $$ wise? Sorry for getting off topic. Goodluck selling it!! Thanks, Tom

11-22-2003, 12:04 AM	#43
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Up to the top again!! __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

11-22-2003, 11:10 PM	#44
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	ttt

11-23-2003, 12:39 AM	#45
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	I love the blazer! I saw in it a recent magazine too. I don't mean to bother you but could you put up some pics of that sweet looking 57' you've got there in the background? __________________ 70' C-10 LWB Fleetside 4.5/6 drop

11-23-2003, 05:09 AM	#47
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	It is in the December 2003 issue of Street Trucks, and also Truckin in the back. __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

11-23-2003, 11:29 AM	#48
rotadyne Registered User Join Date: Jul 2002 Location: Laporte, In Posts: 33	magazines It was also in the October issue of Classic Trucks for the Indy Goodguys coverage. I only took it to two shows. It was a big hit.

11-23-2003, 10:21 PM	#49
renntec99 Registered User Join Date: Nov 2003 Posts: 2	Is it sold yet? If not please email me all the pics that you can to renntec99@aol.com

11-24-2003, 01:39 AM	#50
rotadyne Registered User Join Date: Jul 2002 Location: Laporte, In Posts: 33	Blazer Not sold yet It is pouring rain here and getting ready to snow. I will try to get it out of the garage tommorow to take some more pics and post. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.