![]() |
![]() |
#1 |
Registered User
Join Date: Aug 2012
Location: nantucket,ma
Posts: 230
|
not sitting right
i hate to keep asking the same question but is it a big deal if there is a 5/8 difference in clearance on the front bump stops? i switched the coils from one side to the other ,measured the frame,we have checked everything we cant figure it out.1972 c10 2wd.thanks
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2012
Location: Rosenberg, Texas
Posts: 3,506
|
Re: not sitting right
Are you talking about 5/8" of suspension travel, or an overall height difference from right to left side?
__________________
-Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby) |
![]() |
![]() |
![]() |
#3 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,940
|
Re: not sitting right
These trucks are old. It could have been in a mild fender bender back in the day and have a couple tweaks here and there. Old suspension bushings could be shot too.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2012
Location: nantucket,ma
Posts: 230
|
Re: not sitting right
i am measuring from the top of the bump stop to the area were it hits.the left front frame horn is only 1/4 inch down.it is a old drag racing truck.it was hit hard on the driver side.i replaced upper and lower ball joints, new coils,all bushings look ok.it was dropped when i bought it i think it is lowered 5 inches in front.i am talking about overall ride height.
|
![]() |
![]() |
![]() |
#5 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,940
|
Re: not sitting right
It's probably gonna be that way unless you go through it from scratch and check straightness of the frame and sheetmetal.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,143
|
Re: not sitting right
Step away from the tape measure.
These 40 plus year old work horses have seen plenty. The lightly used ones were abused by todays standards. Even the frame off restorations with all new high quality suspension parts are off a little.
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703 |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2012
Location: nantucket,ma
Posts: 230
|
Re: not sitting right
ok thanks i will live with it.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|