The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-26-2013, 10:05 PM   #201
flips72
Registered User
 
flips72's Avatar
 
Join Date: Jan 2008
Location: oldfort tn
Posts: 1,183
Re: 1963 C-10 in NC

very nice by pass set up cant wait to see it installed.
flips72 is offline   Reply With Quote
Old 05-28-2013, 11:20 AM   #202
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Thanks flips72, should have some pics this week.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 05-31-2013, 01:55 PM   #203
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

My NC truckers will like this one, especially those here at Fort Bragg.
Attached Images
 
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 05-31-2013, 10:10 PM   #204
McMurphy
Registered User
 
McMurphy's Avatar
 
Join Date: Sep 2011
Location: Tacoma, WA
Posts: 2,425
Re: 1963 C-10 in NC

Too bad that could not be more true for the whole nation...
__________________
Michael McMurphy

My 66 Stepside
My 64 Tow Truck
My 66 Tempest

Table Of Contents Added to Page1
McMurphy is offline   Reply With Quote
Old 06-11-2013, 01:23 PM   #205
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Ok, been working alot on the big block lately. Just about ready to start w/pulley install and should be ready to mock up in the truck soon. Have some minor AN/braided hose projects to finish plumbing yet.
Also picked up a chevy hood ornament....been watching them awhile on ebay for $300-900 each (way to rich for my blood), and normally they are the blunted nose GM versions. Anyways...picked up a nice chevy version for $100. Will need rechromed, but no biggie and yet another future project goes in the box on the shelf. Haven't decided yet that I want the hood ornament installed on the truck.
I will post some pics of my engine progress as soon as I can sit still long enough too.
Attached Images
     
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-11-2013, 10:26 PM   #206
McMurphy
Registered User
 
McMurphy's Avatar
 
Join Date: Sep 2011
Location: Tacoma, WA
Posts: 2,425
Re: 1963 C-10 in NC

That is such a cool hood ornament!!
Do you realize how hard it would be for me to not cut in the grill intakes for the "jet" and put lights in there?

On my first 66 Pontiac, I cut out the star in the hood ornament and lit that up, it was way cool.

Nice score man !!
__________________
Michael McMurphy

My 66 Stepside
My 64 Tow Truck
My 66 Tempest

Table Of Contents Added to Page1
McMurphy is offline   Reply With Quote
Old 06-11-2013, 11:39 PM   #207
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

a buddy of mine said the same thing, although considering a less envasive method since there are some cavieties on the bottom of the ornament
Posted via Mobile Device
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-12-2013, 01:51 AM   #208
markeb01
Senior Enthusiast
 
markeb01's Avatar
 
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
Re: 1963 C-10 in NC

Outstanding! A rechromed/restored ornament would be equally cool on the truck or sitting on a shelf of collectables.
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502
markeb01 is offline   Reply With Quote
Old 06-12-2013, 03:52 AM   #209
1Bad62Pro/Street
"Where were you in '62?"
 
1Bad62Pro/Street's Avatar
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
Talking Re: 1963 C-10 in NC

Quote:
Originally Posted by 1963c-10 View Post
My NC truckers will like this one, especially those here at Fort Bragg.
Was that a real NC sign? Ha ha..
Posted via Mobile Device
__________________
PROJECT: "FULL METAL YELLOW JACKET"
1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck
PROJECT: "FULL METAL YELLOW JACKET Build Thread
What Are You Workin' On? - 1Bad62ChevyPickup
PROJECT: "TYRANNORAMBLER REX"
1969 AMC Rambler American Nostalgia Pro/Street
Youtube Channel: Father Son Projects
Youtube Channel: 2TIMOTHY2FITHTEEN

"North and South Carolina Folks Click Here!"
(((( ~ I have Parts For Sale & Miscellaneous Stuff ~ ))))

"Well being as there's no other place around the place,
I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.
1Bad62Pro/Street is offline   Reply With Quote
Old 06-12-2013, 07:30 AM   #210
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Quote:
Originally Posted by 1Bad62Pro/Street View Post
Was that a real NC sign? Ha ha..
Posted via Mobile Device
haha, no something i saw while doing some research on a part
Posted via Mobile Device
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-13-2013, 08:27 AM   #211
clemdaddy
Senior Member
 
clemdaddy's Avatar
 
Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
Re: 1963 C-10 in NC

really likin the hood ornament... just put that with the cool grill guard and send to fayetteville arkansas. not really... unless uhh, you insist.

great find and that sign is a hoot.
clemdaddy is offline   Reply With Quote
Old 06-13-2013, 12:59 PM   #212
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Quote:
Originally Posted by clemdaddy View Post
really likin the hood ornament... just put that with the cool grill guard and send to fayetteville arkansas. not really... unless uhh, you insist.

great find and that sign is a hoot.
That may happen before its all done with.

I should have taken a picture before I opened the box. The entire nose of the ornament was packaged and sent hanging out of the box. The ornament is large....roughly 15" x 14" and they put it in a 10" x 12" box. I was more worried that it might have been damaged and opened it instead. Ornament arrived ok. I have some pics where I placed it on the hood to see how I feel about installing it. The weird part is being so used to not having it that I don't know I'll install it. I plan to do a hood swap soon (i have the donar hood) and have considered mounting it on the old hood to see how it "feels". Ill get the pics up today, and please let me know what you guys think. Ornament or no, and placement also. I set it forward and back a few inches taking some pics to see where it should go. I'd lie to see where aerotruk placed his also.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-13-2013, 01:16 PM   #213
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Heres some pics as promised. The 1st two pics are where Im trying to decide where to mount. The 1st pic is about 2" forward of pic two. I almost like picture 2 better due to being able to see the hood spears.....which one do you guys prefer?
Attached Images
    
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-13-2013, 01:21 PM   #214
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Heres a few more. This should be called a hood weight as I think its around 8lbs. Probably the largest hood ornament Ive ever seen. But they are pretty cool though.
Attached Images
   
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-14-2013, 11:35 AM   #215
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Here is the 2nd batch of my parts using vinegar for rust removal. These are the rear tail light brackets for the step side trailer project. 4 day soak and then a few hours in baking soda/water solution to neutralize them.
Attached Images
   
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-14-2013, 02:45 PM   #216
markeb01
Senior Enthusiast
 
markeb01's Avatar
 
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
Re: 1963 C-10 in NC

Hard to tell best location from a photograph, but I do like the ornament on there. I kind of wish they had designed an ornament without the wings that specifically fit the V lines on the hood. My hood would never support one of the heavy ornaments, it barely stays up without one!

I’ll have to try the vinegar bath on some rusty parts. Those brackets look like new stampings
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502
markeb01 is offline   Reply With Quote
Old 06-14-2013, 02:49 PM   #217
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Thanks Mark. I agree with the comments on the ornament. I can't find any factory documentation on the mounting location, so I guess I'll have to "wing it" off where it just looks best.

The vinegar has been a surprisingly good deal. Cost is cheap, it does 95% of the work and it's easy to clean up afterwards. This is the 2nd time I have used it, the 1st was on some cab/front fender brackets that had 50 years of everything growing on them.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-14-2013, 02:51 PM   #218
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

These are the cab/fender brackets that I did my test run on a few weeks ago. I didn't get before pics on the tail light brackets, but condition was close. I did a thread on this process http://67-72chevytrucks.com/vboard/s...d.php?t=583194 if anyone wants to check it out. Some suggest using salt mixed in also, but it creates a thick black tarry slag. I have not had that with straight vinegar, so I will stick with straight vinegar.
Attached Images
   
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-17-2013, 08:23 AM   #219
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Got the hood ornament mounted on the truck. Will get pics up later, my phones not wanting to cooperate with me this a.m. Installed it now so I can see if I like it, I have a nice donar hood to put on the 63 and I figured it'd save me drilling holes in a solid hood if I end up not liking it on there.

One note on the hood ornament. I used 1/4" stainless studs & nuts instead of the factory bolts. It made install easier, especially on the front stud under the nose of the jet that sits in the space over the latch which is very tight. This way I don't have to mess w/the threads anymore and risk damage.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 07-03-2013, 04:03 PM   #220
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

A couple of teaser pics of the engine. Brought it to the huse today to do some more work on it. I want to mock up the pulleys and fuel lines with the carb on. I put a delete plate kit on all the exhaust ports and covered the rest of the openings since these pics. I mocked up the water bypass kit and off top I want to go a few inches longer on the driver side. Hose will work, but its tighter of a bend than I want and I'd like to have the same amount of slack as the passenger side. I had to rotate the thermostat base 180* due to the air gap intake, but it will function just as well this way, and no clearance issues that I can see with the front of the block. I will also have to change the passenger side rear to a 90* as the 45* rests right against the vacuum advance and will inhibit any counterclock wise timing adjustments. The valve covers are aluminum and I polished them prior to going to the builder, but they will need another polishing after sitting a year. I need to machine out the breather and pcv ports also why the covers are off. The harber freight foldable engine hoist worked great with absolutely no complaints. Pulled it from the back of my 63 and it had plenty of height. I have the engine on a low mount engine dolly that bolts to the motor mount location. The lower weight movement is easier since 90% of my projects are done alone. I have the bellhousing back from the machine shop also, so I can do final mock up of the hydraulic clutch conversion. Its currently in rust conversion treatment and will have paint on it hopefully tonight. I'll post more on the engine and its components in the next post. Just got it unloaded and in its temporary home until the install. I won't know about distributor clearance until closer in to the install, but I can always go points and it wouldn't bother me in the least or even a smaller HEI, but I do like the Mallory components on ignition.
Attached Images
    
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer

Last edited by 1963c-10; 07-03-2013 at 07:14 PM.
1963c-10 is offline   Reply With Quote
Old 07-03-2013, 06:26 PM   #221
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Paint dry on the bellhousing, so I'm going to mock up the novak hydraulic slave kit
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 07-03-2013, 06:58 PM   #222
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

Heres a few pic of where I'm at with the clutch system. I need to file a little more around where the clutch fork access is. The new fork is just a hair thicker than the stock one was. This is a 64 Chevy c-10 v8 truck bellhousing # 3815891. Has many other applications, but this is what it came from. I had to machine down the thick boss in the 9 o'clock position to the same height as the boss in the 11 o'clock position to use this slave assembly. It can be used without the machine work, but then you have to use a spacer and shorten the pushrod. I opted to just have it machined. Cleaned up the bellhousing, chased the threads, rust prevention treatment followed by a few coats of high temp aluminum paint. I need to get a new fork boot from NAPA tomorrow and finish the final filing for the clutch fork and it should be done.
Attached Images
   
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 07-04-2013, 03:21 PM   #223
McMurphy
Registered User
 
McMurphy's Avatar
 
Join Date: Sep 2011
Location: Tacoma, WA
Posts: 2,425
Re: 1963 C-10 in NC

That water bypass looks pretty spiffy !!
I am saving this page of your build as I may do this mod to my rig.

Happy 4th of July !!!
__________________
Michael McMurphy

My 66 Stepside
My 64 Tow Truck
My 66 Tempest

Table Of Contents Added to Page1
McMurphy is offline   Reply With Quote
Old 07-04-2013, 03:28 PM   #224
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1963 C-10 in NC

thanks. i plan to change a few fittings on the bypass system. and i need to mock up the carb/linkage 1st, but i think it'll all pan out ok
Posted via Mobile Device
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 07-04-2013, 03:32 PM   #225
markeb01
Senior Enthusiast
 
markeb01's Avatar
 
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
Re: 1963 C-10 in NC

I'm not very familiar with big block engines. I know they have a bypass, but not what it's for or how it works. Where do your new hoses connect and what is the purpose. I like the way it looks.

Also, your Novak setup is more simplified than mine. They changed the designed shortly after I bought my setup. Even so, it has worked flawlessly since the day it was installed. You won't be disappointed.
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502
markeb01 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:52 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com