Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-08-2013, 09:04 PM | #1 |
Registered User
Join Date: Jul 2012
Location: Springhill TN
Posts: 84
|
New build wheel,tire and brake questions
My son and I are about to start a new build.We built a 66 c-10 that got him on powerblock that has been sold and a new 69 c-10 with a 67 front end, the top very mildly chopped and A- pillars laid back for this build.
We plan on using a Porterbuilt front and rear dropmember,arms etc.... He has picked out what wheel he wants to run I am just not sure on backspacing and tire size and if we should just run 6 lug all the way around with standard disk or spend the money and go with a set of 5 lug axles 5 lug front hubs and then run willwood brakes front and rear.I know there is a big money difference. The wheel he has picked is not what I would have picked but its his truck.He wants to run the KMC Slide in black.I am thinking 20x8.5 up front and 22x9.5 on the rear.What backspacing and tire size should we go with if we go this route? |
06-09-2013, 01:04 AM | #2 |
Registered User
Join Date: Apr 2013
Location: enumclaw, wa
Posts: 143
|
Re: New build wheel,tire and brake questions
I put 4.5/6in drop on my 67 with 6 lug disc brake conversion. I had a bit of a hard time finding wheels for the six lug. There's just so much more options for the 5 lug. There are some cool 6 lugs out there though. As for backspaceing, I went with a 5.5in BS on my 20x8.5s and had no clearance issues in the front. The back will need spacers though. 1.5in spacers worked perfectly. Good luck.
Posted via Mobile Device
__________________
'67 2wd LWB 350/4speed. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|