Noisy Hood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 11-26-2003, 09:19 PM

For the hood in a 68 is there something like padding that would go on it to keep it from being so noisy when closed?

Thanks

**old Rusty C10** · 11-26-2003, 11:19 PM

when i had an old buick the hood used to squeak cause the rubber bushings that hold the hood in adjustment had shined up and the hood squeaked like hell all i did was adjust em up a little and then i sanded the top to get the shine off with emery cloth

*rickspickuppart* · 11-27-2003, 04:08 AM

there wasn't any insulation (like the newer trucks have) that came on them

Shawn

LeRoy · 11-27-2003, 04:10 AM

There's supposed to be some between the hood braces and outer skin. Is that what your asking about

Huck · 11-27-2003, 10:26 AM

There are pads that go between the hood braces and the sheet metal to reduce vibration and noise. Most aftermarket dealers have them or you could use insulation material---polyfoam etc. None of the hoods had heat insulation covering the sheetmetal. You could put some spray undercoating on the sheetmetal wich I've seen done.

11-26-2003, 09:19 PM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Noisy Hood For the hood in a 68 is there something like padding that would go on it to keep it from being so noisy when closed? Thanks

11-26-2003, 11:19 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	when i had an old buick the hood used to squeak cause the rubber bushings that hold the hood in adjustment had shined up and the hood squeaked like hell all i did was adjust em up a little and then i sanded the top to get the shine off with emery cloth __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-27-2003, 04:10 AM	#4
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	There's supposed to be some between the hood braces and outer skin. Is that what your asking about __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-27-2003, 04:08 AM	#3
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	there wasn't any insulation (like the newer trucks have) that came on them Shawn

11-27-2003, 10:26 AM	#5
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	There are pads that go between the hood braces and the sheet metal to reduce vibration and noise. Most aftermarket dealers have them or you could use insulation material---polyfoam etc. None of the hoods had heat insulation covering the sheetmetal. You could put some spray undercoating on the sheetmetal wich I've seen done.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.